Shop by Category
New

Hilti HIT-RE 500-V3 Epoxy Anchor 11.1oz 2123401

Part # : 511332
 
$ 81.77

Product Description

HIT-RE 500 V3 Epoxy anchor Epoxy adh RE 500-V3 11.1oz/330ml #2123401
Base materials
Concrete (cracked), Concrete (uncracked)
Base material condition
Dry, Submerged, Water-filled, Wet
Approvals / Test reports
ICC-ES report (concrete)
Seismic loading
Yes
PROFIS Software
Yes
Clean-Tec
No
Cleaning procedures
Automatic Cleaning (SafeSet Hollow Drill Bit), Compressed-Air Cleaning
Storage and transportation temperature range
41 - 77 °F
In-service temperature – range
-40 - 158 °F
Shelf life from date of manufacture (at 73°F/23°C and 50% relative humidity)
12 months
Product information
This product is subject to the Chemicals Prohibition Ordinance (ChemVerbotsV). It is to be used by professionals within the scope of their work and, in accordance with § 8 para. 3 no. 1 of the ChemVerbotsV, is to be used exclusively for its intended purpose as anchor adhesive, for rebar connections (typically steel-to-concrete and/or concrete-to-concrete connections), as well as for other intended fastening and uses within the scope of construction activities. Purchasers must comply with all existing legal requirements for the use of these products and may use them only as permitted. Information in the safety data sheets and operating instructions on the use of these products, the hazards associated with their use, the necessary safety measures during intended use and in the event of unforeseen spillage or release, and proper disposal must always be observed. The operating instructions and safety data sheets can be accessed in the detailed view of the products concerned at www.hilti.de in a format that can be saved and printed, and the operating instructions are enclosed with the products. Safety instructions: Wear protective gloves/protective clothing/eye protection/face protection. Do not get in eyes, on skin or on clothing. In case of contact with eyes: rinse thoroughly with water for several minutes. Remove contact lenses if possible, continue rinsing. If eye irritation, skin irritation or rash persist seek medical advice/attention. In case of contact with skin: wash with plenty of soap and water. Disposal: Completely emptied cartridges can be disposed of via the Dual System (yellow garbage can). Full/partially emptied containers are to be disposed of as special waste.
Product Class
Ultimate

Product Specifications

  • Main Category: Adhesives, Sealants, and Tapes
  • Brand: Hilti
  • Cure Time: @68deg F 6-1/2 Hours
  • Cure Time: @105deg F 4 hours
  • Cure Time: @23deg F 168 hours
  • Anchor Adhesives and Dispensers: Injectable Mortar
  • Anchors: Epoxy
  • Temperature Usage Range: -40 to 248deg F
  • Series: HIT-RE

Applications/Usage & Features

Features
  • High performance and technical superiority as per international approvals
  • Suitable for diamond-cored holes – when prepared using the TE-YRT roughening tool
  • Injectable epoxy suitable for all-year use – cures at temperatures down to -5°C / 23°F
  • Longer working time – allows greater flexibility during installation
  • Suitable for water-filled holes and underwater applications
Applications
  • Structural connections with post-installed rebar (e.g. extension/connection to walls, slabs, stairs, columns, foundations, etc.)
  • Structural renovation of buildings, bridges and other civil structures, retrofitting and re-strengthening of concrete members possible
  • Anchoring structural steel connections (e.g. steel columns, beams, etc.)
  • Fastenings requiring seismic qualification
  • Fastening in natural stone and wood, including GLT and CLT made by spruce, pine or fir.

Product Reviews