HP 100® General Purpose Grade Hot Melt Packaging Tape
General purpose grade hot melt packaging tape for manual or automated industrial sealing of lightweight cartons with minimal exposure to handling, shipping and load stress. HP 100® is engineered with an aggressive, high-tack adhesive and Hold Strong® technology keeping carton seals intact.
Backing: 25 micron cast biaxially oriented polypropylene film
Adhesive: Synthetic rubber/resin hot melt adhesive
Liner: NA
| Property | Standard | Metric |
|---|---|---|
| Adhesion to Backing - Hand Rolls Only | 18 oz/in width | 1.97 N/10 mm |
| Adhesion to Backing - Machine Rolls Only | 4 oz/in width | 0.44 N/10 mm |
| Adhesion to Stainless Steel | 43 oz/in width | 4.71 N/10 mm |
| Application Temperature Range | 35 F to 110 F | 2 C to 43 C |
| Elongation | 150% | 150% |
| Holding Power to Fiberboard | 10,000 minutes | 10,000 minutes |
| Service Temperature Range | -20 F to 150 F | -29 C to 66 C |
| Tensile Strength - Longitudinal Direction | 21 lbs/in width | 36.8 N/10 mm |
| Tensile Strength - Transverse Direction | 36 lbs/in width | 63.0 N/10 mm |
| Thickness | 1.6 mils | 0.041 mm |
Tape should be stored in its original packaging in a cool, dry area away from direct sunlight and should be used within 12 months of date of shipment. Surfaces to which tape is applied should be clean, dry and free of grease, oil or other contaminants.
Technical Data Sheet