Fire Stop
Adhesives, Sealants, and Tapes


Displaying: 1 - 12 of 12 Matching Items
12 Items
View:
Part #:516691

Technical Specs Patching Application Mortars and Patching Cements Item Flooring/Grouting Concrete Repair Color Gray Number of Components 2 Container Size 1 gal Container Style Pail Coverage 4.8 sq ft VOC Less Than 1.0%, 10g/L Flash Point Greater Than 212 Degrees F Starts to Harden Not Specified Full Cure Time Not Specified For Use On Surface Material Concrete, Glass, Steel, Wood Application 000 PSI, Chemically Resistant, Compressive Strength 13, Rapid Setting, Summer and Winter Additives Also Available to Aid Cure Times Characteristics 2-Part, Rapid Set Time Meets OSHA Cured Color Family Grays
$139.83 MSRP $ 126.00
Part #:505104

A heavy consistency, trowel applied mastic formulated with refined asphalts special fillers, surfactants,and solvent. Formulated to work on dry or wet roof surfaces. Wet/Dry cement contains special additives which provide excellent adhesion to damp substrates. It remains soft and pliable through all climatic conditions assuring a durable, weather proof seal. Meets all the requirements of ASTM D4586. Uses&bullUse for emergency repairs in inclement weather or for any rooftop repair where a standard cement would ordinarily be used.Advantages&bullEasily applied with trowel or putty knife.&bullUsed on damp surfaces for a tight long-lasting protective seal. &bullStays soft and pliable in all types of weather.
$ 62.67
Part #:510554

FIRE STOP LC150RD Sealant Sealant FIRE STOP LC150RD Sealant is a versatile intumescent product intended for firestopping a wide array of applications in small commercial or grouped residential construction or other structures with similar applications. It seals penetration openings against the spread of fire, smoke, gases and water. LC150RD is fully tested to ASTM E814 (UL1479) and meets Class A finish requirements for Flame Spread and Smoke Development when tested in accordance with ASTM E84 (UL723). LC150RD provides up to a 2 hour fire rating for typical service penetrations through concrete or wood floors, concrete or masonry walls, as well as gypsum board walls. LC150RD is also acoustically tested, demonstrating excellent sound attenuation properties. Tested &amp Classified for Fire Resistance &bullMetallic Pipes including steel, iron, or copper pipe and tubing&bullNonmetallic Pipes, Conduits &amp Tubing including PVC, CPVC, ABS, and PEX. &bullElectrical &amp Electronic Cabling including service entrance, power distribution, computer, telephone, television.&bullMetal Ductwork including HVAC, bath and dryer vents.&bullInsulated Pipes including heating, cooling, and condensation applications.&bullComplete Wood Floor firestopping package for electrical, plumbing, HVAC, telephone, and television.
$ 13.80
Part #:841-442-1291113

Technical Specs Item Crack Filler Size 8.6 oz Container Type Stick Color Gray VOC 7.84 g/L Flash Point Greater Than 93 Degrees C Temp. Range Up to 120 Degrees F Dry Time Not Specified Dry Time Recoat Not Specified Dry Time Tack Free Not Specified Traffic Hours Not Specified Begins to Harden 1/2 hr Setting Time Not Specified Functional Cure 1-1/2 hr Adheres To Concrete, Masonry, Wood Application Anchor Bolt Holes, Filling Cracks, For Industrial Floor Applications Receiving Heavy Traffic Or Exterior Applications Where Minimal Joint Movement From Thermal Cycling Will Occur, Indoor/outdoor Use, Pinholes Characteristics 11 Mixing Ratio, 2 Part Self-leveling Epoxy Yield Strength Not Specified Meets ASTM, OSHA
$736.68 MSRP $ 729.31 BOX
 
Displaying: 1 - 12 of 12 Matching Items