National Manufacturing
Armstrong International
View:
Active Filters :
closeout
Part #:400061
- CLOSEOUTS Only 65 Left!
- Product Overview Hinges and screws are semi-concealed when hinge is closed Tight pin for more secure applications Designed for chests, cabinets, storages boxes, etc. Manufactured with hot-rolled steel
closeout
$0.44 MSRP
$
0.36
Part #:405675
- Availability: Will be backordered (Typically arrives in 7 days)
- Authorized Replacement for Stanley Hardware Stock # N273-417
Product Overview
Heavy hook designed for hanging home and industrial products
Can be opened and closed with pliers or vise
For interior and exterior applications
Manufactured from steel wire
Qty:
closeout
$0.15 MSRP
$
0.13
Part #:410681
- Availability: Will be backordered (Typically arrives in 9 days)
- Authorized Replacement for Stanley Hardware Stock # N121-525 Product Overview Heavy hook designed for hanging home and industrial products Can be opened and closed with pliers or vise For interior and exterior applications Manufactured from steel wire
Qty:
closeout
$0.67 MSRP
$
0.54
Part #:410684
- CLOSEOUTS Only 1 Left!
- Authorized Replacement for Stanley Hardware Stock # N273-425 Product Overview Heavy hook designed for hanging home and industrial products Can be opened and closed with pliers or vise For interior and exterior applications Manufactured from steel wire
Qty:
Part #:706624
- Inverted Bucket Steam TrapsEnergy efficient because it's so reliable The inverted bucket is the most reliable steam trap operating principle known. The heart of its simple design is a unique leverage system that multiplies the force provided by the bucket to open the valve against pressure. Since the bucket is open at the bottom, it resists damage from water hammer, and wear points are heavily reinforced for long life. The inverted bucket has only two moving parts-the valve lever assembly and the bucket. That means no fixed points, no complicated linkage. Nothing to stick, bind or clog. Conserves energy even in the presence of wear Armstrong inverted bucket steam traps open and close based on the difference in density between condensate and steam-the inverted bucket principle. They open and close gently, minimizing wear. This simple fact means that inverted buckets are subject to less wear than some other types of traps. In fact, as an Armstrong inverted bucket trap wears, its tight seal actually improves. The valve and seat of the Armstrong trap provide essentially line contact-resulting in a tight seal because the entire closing force is concentrated on one narrow seating ring. An Armstrong inverted bucket steam trap continues to operate efficiently with use. Gradual wear slightly increases the diameter of the seat and alters the shape and diameter of the valve. But, as this occurs, a tight seal is still preserved-the ball merely seats itself more deeply. Corrosion-resistant parts The stainless steel valve and seat of the Armstrong inverted bucket steam trap are individually ground and lapped together in matched sets. All other working parts are wear- and corrosion-resistant stainless steel. Venting of air and CO2 The Armstrong inverted bucket provides continuous automatic air and CO2 venting with no cooling lag or threat of air binding. Operation against back pressure The Armstrong inverted bucket has excellent performance against back pressure. It has no adverse effect on inverted bucket operation other than to reduce its capacity by the low differential. The bucket simply requires less force to pull the valve open and cycle the trap. Freedom from dirt problems Armstrong designed its inverted bucket to be virtually free of dirt problems. The valve and seat are at the top of the trap, far away from the larger particles of dirt, which fall to the bottom. Here, the up-and-down action of the bucket pulverizes them. Since the valve of an inverted bucket is either fully closed or open, dirt particles pass freely. And the swift flow of condensate from under the bucket's edge creates a unique self-scrubbing action that sweeps dirt out of the trap.
Qty:
Part #:706681
- Steam Trap ConnectorsBesides 2000 Series stainless steel inverted bucket traps, the standard 360° connector or IS-2 connector with integral strainer can also be used on many Armstrong thermostatic, disc, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos two-bolt steam traps can use Armstrong connectors. IS-2 Stainless Steel Connector with Integral Strainer &bull A full line stainless steel strainer in the connector eliminates leak points and reduces installation time &bull A strainer that is not discarded when the trap is replaced &bull Easy strainer screen replacement &bull Optional blowdown valve &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos S-2 connector. Standard 360° Stainless Steel Connector &bull A compact, lightweight assembly &bull Standardization, reducing inventory &bull A compact design, simplifying piping &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer and bimetallic steam traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos standard connector.
Qty:
Part #:708464
- Steam Trap ConnectorsBesides 2000 Series stainless steel inverted bucket traps, the standard 360° connector or IS-2 connector with integral strainer can also be used on many Armstrong thermostatic, disc, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos two-bolt steam traps can use Armstrong connectors. IS-2 Stainless Steel Connector with Integral Strainer &bull A full line stainless steel strainer in the connector eliminates leak points and reduces installation time &bull A strainer that is not discarded when the trap is replaced &bull Easy strainer screen replacement &bull Optional blowdown valve &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos S-2 connector. Standard 360° Stainless Steel Connector &bull A compact, lightweight assembly &bull Standardization, reducing inventory &bull A compact design, simplifying piping &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer and bimetallic steam traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos standard connector.
Qty:
closeout
$19.90 MSRP
$
16.55
Part #:400413
- CLOSEOUTS Only 1 Left!
- Product Overview Non-swaged hinge for surface application by welding Manufactured with cold rolled steel Five knuckle, full mortise design Tight pin for more secure applications
Qty:
closeout
$4.13 MSRP
$
3.42
Part #:401270
- CLOSEOUTS Only 4 Left!
- Product Overview Swaged for mortise installations Manufactured with cold rolled steel Five knuckle, full mortise design Loose pin allows doors to be removed without removing hinge
Qty:
closeout
$4.21 MSRP
$
3.40
Part #:401275
- CLOSEOUTS Only 7 Left!
- Authorized Replacement for Stanley Hardware Stock # S754-543 Product Overview Designed to secure a wide variety of doors, cabinets, boxes, trunks, etc. For security, all screws are concealed when hasp is closed Ribbed design for extra strength Includes rigid non-swivel staple Manufactured from hot rolled steel
Qty:
closeout
$5.99 MSRP
$
4.83
Part #:401276
- CLOSEOUTS Only 5 Left!
- Authorized Replacement for Stanley Hardware Stock # S754-579 Product Overview Designed to secure a wide variety of doors, cabinets, boxes, trunks, etc. For security, all screws are concealed when hasp is closed Ribbed design for extra strength Includes rigid non-swivel staple Manufactured from hot rolled steel
Qty:
closeout
$4.17 MSRP
$
3.20
Part #:401281
- CLOSEOUTS Only 12 Left!
- Product Overview Designed for security applications on lightweight doors, chests and cabinets Use on vertical, horizontal, left or right hand applications In vertical use, the notch-in case holds the bolt in a locked position Bolt diameter is .32 Durable steel case, strike and bolt
Qty:
closeout
$5.67 MSRP
$
4.69
Part #:410626
- CLOSEOUTS Only 2 Left!
- Authorized Replacement for Stanley Hardware Stock # S145-020 S145-020700
Product Overview
Offset screw holes for extra strength and to prevent wood from splitting
Tight pin for left or right hand applications Heavy-duty Manufactured with hot-rolled steel
Qty:
closeout
$3.88 MSRP
$
3.13
Part #:410632
- CLOSEOUTS Only 6 Left!
- Authorized Replacement for Stanley Hardware Stock # S754-550 Product Overview Designed to secure a wide variety of doors, cabinets, boxes, trunks, etc. For security, all screws are concealed when hasp is closed Ribbed design for extra strength Includes rigid non-swivel staple Manufactured from hot rolled steel
Qty:
closeout
$3.15 MSRP
$
2.49
Part #:410670
- CLOSEOUTS Only 11 Left!
- Authorized Replacement for Stanley Hardware Stock # N221-523 Product Overview Designed for home and industrial applications Hex nut included Standard machine screw threads For interior and exterior applications Course machine screw thread on the extra large sizes (larger than 1/2x12) Manufactured from steel wire
Qty:
Part #:713360
-
Y-Type Cast Iron Strainers
250 lb Screwed 1/2"-3" Class 125 Flanged 2"-6" Class 250 Flanged 2"-6"
Screen chambers won't leak or crush
Both ends of the chambers are precisely machined. This means perfectly round and smooth seating surfaces, as well as a fixed chamber length. Since the screen seats snugly on the machined surface, no particle bigger than the screen opening can escape around the end of the screen.
Screwed retainers easy in, easy out
Straight threads mean it takes less torque to achieve a tight seal with proper gasket compression. Less torque is also required to remove the retainer. For you, that means less danger of "freezing in" than with hard-to-break tapered pipe threads.
Off-center blowdown connections for better dirt removal
Off-center drains on 2-1/2" and 3" strainers allow you to remove liquid and dirt nearly completely when blowing down the strainer. Also, less liquid will spill when the screen retainer is removed.
Many screen choices
Many screen materials, meshes and perforations are available.
Qty:
Part #:713363
-
Y-Type Cast Iron Strainers
250 lb Screwed 1/2"-3" Class 125 Flanged 2"-6" Class 250 Flanged 2"-6"
Screen chambers won't leak or crush
Both ends of the chambers are precisely machined. This means perfectly round and smooth seating surfaces, as well as a fixed chamber length. Since the screen seats snugly on the machined surface, no particle bigger than the screen opening can escape around the end of the screen.
Screwed retainers easy in, easy out
Straight threads mean it takes less torque to achieve a tight seal with proper gasket compression. Less torque is also required to remove the retainer. For you, that means less danger of "freezing in" than with hard-to-break tapered pipe threads.
Off-center blowdown connections for better dirt removal
Off-center drains on 2-1/2" and 3" strainers allow you to remove liquid and dirt nearly completely when blowing down the strainer. Also, less liquid will spill when the screen retainer is removed.
Many screen choices
Many screen materials, meshes and perforations are available.
Qty:
Part #:713364
-
Y-Type Cast Iron Strainers
250 lb Screwed 1/2"-3" Class 125 Flanged 2"-6" Class 250 Flanged 2"-6"
Screen chambers won't leak or crush
Both ends of the chambers are precisely machined. This means perfectly round and smooth seating surfaces, as well as a fixed chamber length. Since the screen seats snugly on the machined surface, no particle bigger than the screen opening can escape around the end of the screen.
Screwed retainers easy in, easy out
Straight threads mean it takes less torque to achieve a tight seal with proper gasket compression. Less torque is also required to remove the retainer. For you, that means less danger of "freezing in" than with hard-to-break tapered pipe threads.
Off-center blowdown connections for better dirt removal
Off-center drains on 2-1/2" and 3" strainers allow you to remove liquid and dirt nearly completely when blowing down the strainer. Also, less liquid will spill when the screen retainer is removed.
Many screen choices
Many screen materials, meshes and perforations are available.
Qty:
Part #:713365
Qty:
Part #:713366
-
Y-Type Cast Iron Strainers
250 lb Screwed 1/2"-3" Class 125 Flanged 2"-6" Class 250 Flanged 2"-6"
Screen chambers won't leak or crush
Both ends of the chambers are precisely machined. This means perfectly round and smooth seating surfaces, as well as a fixed chamber length. Since the screen seats snugly on the machined surface, no particle bigger than the screen opening can escape around the end of the screen.
Screwed retainers easy in, easy out
Straight threads mean it takes less torque to achieve a tight seal with proper gasket compression. Less torque is also required to remove the retainer. For you, that means less danger of "freezing in" than with hard-to-break tapered pipe threads.
Off-center blowdown connections for better dirt removal
Off-center drains on 2-1/2" and 3" strainers allow you to remove liquid and dirt nearly completely when blowing down the strainer. Also, less liquid will spill when the screen retainer is removed.
Many screen choices
Many screen materials, meshes and perforations are available.
Qty:
Part #:713381
- Float and Thermostatic (F&T) Steam TrapsThe More Your Steam Pressure Varies, The More You Need Armstrong F&T TrapsWhen steam pressure may vary from maximum steam supply pressure to vacuum, Armstrong F&Ts are your most energy-efficient choice. Our line of F&Ts brings Armstrong performance, dependability and long life to trapping services requiring continuous drainage with high air venting capacity. Thanks to separate orifices for condensate and air, they provide continuous condensate drainage and air venting-even under conditions of zero pressure. All the benefits detailed here have been designed into Armstrong F&Ts through long experience in the manufacture of pressure float-type traps. They assure you of optimum operating efficiency for long periods with minimum trouble. How they work Float and thermostatic traps are mechanical units that operate on both density and temperature principles. The float valve operates on the density principle. A level connects the ball float to the valve and seat. Once condensate reaches a certain level in the trap, the float rises, opening the orifice and draining condensate. A water seal formed by the condensate prevents live steam loss. Since the discharge valve is under water, it is not capable of venting air and non-condensables. When the accumulation of air and con-condensable gases causes a significant temperature drop, a thermostatic air vent in the top of the trap discharges them. The thermostatic vent opens at a temperature a few degrees below saturation, so it's able to handle a large volume of air-through an entirely separate orifice-but at a slightly reduced temperature. Built as tough as the jobs they do Armstrong float and thermostatic traps are unique in their super heavy duty construction. Armstrong uses high quality ASTM A48 Class 30 cast iron or ASTM A216 WCB cast steel-normally found in pressure vessels rated to 250 psi (17 bar) or 465 psi (32 bar). Internal mechanisms are made from stainless steel and are heavily reinforced. No brass cotter pins here. Valves and seats are stainless steel, hardened, ground and lapped to withstand the erosive forces of flashing condensate. Why go to all this trouble for traps normally recommended for low-pressure, modulating service? The operative word here is modulating. Modulating pressures mean widely varying loads, thermal cycling and high air and non-condensable gas loads. In other words tough service. Inferior, lightweight construction in this kind of service is a mistake waiting to happen. Trap failures on modulating pressure may lead to water hammer, corrosion and even damage to heat exchangers. Armstrong's published capacities are based on actual measurements of traps handling hot, flashing condensate. Competitive F&Ts may utilize theoretical calculated capacities. Armstrong uses its own steam lab to give you actual capacity-especially important on high-capacity traps such as those in our ultra-capacity line. Not only does Armstrong offer super heavy duty construction for long life and reliability, but we also supply the data to back up performance. Here's a simple, easy-to-remember summary The more your pressure varies, the more you need Armstrong F&Ts.
Qty:
closeout
$15.72 MSRP
$
12.99
Part #:400246
- CLOSEOUTS Only 1 Left!
- Product Overview Friction type pin will not fall out Surface mount for easy installation Manufactured from cold-rolled steel, with steel pin Can be cut to desired length
Qty:
closeout
$0.45 MSRP
$
0.37
Part #:400411
- CLOSEOUTS Only 1 Left!
- Authorized Replacement for Stanley Hardware Stock # N221-051 S759-465 Product Overview Designed for home and industrial applications Hex nut included Standard machine screw threads For interior and exterior applications Course machine screw thread on the extra large sizes (larger than 1/2x12) Manufactured from steel wire
Qty:
Displaying: 1 - 24 of 2,022 Matching Items