Star Pipe Products
Armstrong International
View:
Active Filters :
Part #:200534
- Features and Advantages
&bull Sizes 3"-12" are Underwriters Laboratories Inc. Listed at 200 PSI for 3"-8" sizes and 175 PSI for 10"-12" sizes.For use on PC350 ductile iron and SCH40 steel pipe.&bull Bolt hole drilling is to ANSI B16.1 class 125.&bull Uses standard mechanical joint gasket for seal on DI Pipe and Transition Gasket on steel pipe.&bull Pipe fabrication can be done on site, using plain end pipe.&bull Flange Adapters are ideal for jobs involving retro-fitting.&bull Can be used on Ductile Iron (3"-36") and Steel (3"-12") Pipe -- steel pipe sizes require a transition gasket.&bull Can be used in above or below ground applications&bull If future maintenance is required, Flange Adapters can be easily disassembled.
Qty:
Part #:201202
- Comes with 5-1/4in HD Lid Only "Water" CLS 35 VBLIDHD35 Top 26in Botton 36in.
$
275.00
Qty:
Part #:204311
- Top 24in 19lbs, Bottom 39in 22lbs
Material Cast Iron Per ASTM A48 Class 30B
Screw Type Curb Box
$
117.70
Qty:
Part #:204343
- Stargrip Series 3000 Mechanical Joint Wedge Action Restraint for Ductile Iron Pipe
Material Specifications&bull Gland Ductile Iron per ASTM A536, Grade 65-45-12&bull Wedges Ductile Iron per ASTM A536, Grade 65-45-12 heat treated to a minimum of 370 BHN Wedge Finish Thermally cured fluoropolymer epoxy coating
Qty:
Part #:204344
- Stargrip Series 3000 Mechanical Joint Wedge Action Restraint for Ductile Iron Pipe
Material Specifications&bull Gland Ductile Iron per ASTM A536, Grade 65-45-12&bull Wedges Ductile Iron per ASTM A536, Grade 65-45-12 heat treated to a minimum of 370 BHN Wedge Finish Thermally cured fluoropolymer epoxy coating
Qty:
$
7.00
Qty:
$
21.00
Qty:
Part #:706624
- Inverted Bucket Steam TrapsEnergy efficient because it's so reliable The inverted bucket is the most reliable steam trap operating principle known. The heart of its simple design is a unique leverage system that multiplies the force provided by the bucket to open the valve against pressure. Since the bucket is open at the bottom, it resists damage from water hammer, and wear points are heavily reinforced for long life. The inverted bucket has only two moving parts-the valve lever assembly and the bucket. That means no fixed points, no complicated linkage. Nothing to stick, bind or clog. Conserves energy even in the presence of wear Armstrong inverted bucket steam traps open and close based on the difference in density between condensate and steam-the inverted bucket principle. They open and close gently, minimizing wear. This simple fact means that inverted buckets are subject to less wear than some other types of traps. In fact, as an Armstrong inverted bucket trap wears, its tight seal actually improves. The valve and seat of the Armstrong trap provide essentially line contact-resulting in a tight seal because the entire closing force is concentrated on one narrow seating ring. An Armstrong inverted bucket steam trap continues to operate efficiently with use. Gradual wear slightly increases the diameter of the seat and alters the shape and diameter of the valve. But, as this occurs, a tight seal is still preserved-the ball merely seats itself more deeply. Corrosion-resistant parts The stainless steel valve and seat of the Armstrong inverted bucket steam trap are individually ground and lapped together in matched sets. All other working parts are wear- and corrosion-resistant stainless steel. Venting of air and CO2 The Armstrong inverted bucket provides continuous automatic air and CO2 venting with no cooling lag or threat of air binding. Operation against back pressure The Armstrong inverted bucket has excellent performance against back pressure. It has no adverse effect on inverted bucket operation other than to reduce its capacity by the low differential. The bucket simply requires less force to pull the valve open and cycle the trap. Freedom from dirt problems Armstrong designed its inverted bucket to be virtually free of dirt problems. The valve and seat are at the top of the trap, far away from the larger particles of dirt, which fall to the bottom. Here, the up-and-down action of the bucket pulverizes them. Since the valve of an inverted bucket is either fully closed or open, dirt particles pass freely. And the swift flow of condensate from under the bucket's edge creates a unique self-scrubbing action that sweeps dirt out of the trap.
Qty:
Part #:706681
- Steam Trap ConnectorsBesides 2000 Series stainless steel inverted bucket traps, the standard 360° connector or IS-2 connector with integral strainer can also be used on many Armstrong thermostatic, disc, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos two-bolt steam traps can use Armstrong connectors. IS-2 Stainless Steel Connector with Integral Strainer &bull A full line stainless steel strainer in the connector eliminates leak points and reduces installation time &bull A strainer that is not discarded when the trap is replaced &bull Easy strainer screen replacement &bull Optional blowdown valve &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos S-2 connector. Standard 360° Stainless Steel Connector &bull A compact, lightweight assembly &bull Standardization, reducing inventory &bull A compact design, simplifying piping &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer and bimetallic steam traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos standard connector.
Qty:
Part #:708464
- Steam Trap ConnectorsBesides 2000 Series stainless steel inverted bucket traps, the standard 360° connector or IS-2 connector with integral strainer can also be used on many Armstrong thermostatic, disc, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos two-bolt steam traps can use Armstrong connectors. IS-2 Stainless Steel Connector with Integral Strainer &bull A full line stainless steel strainer in the connector eliminates leak points and reduces installation time &bull A strainer that is not discarded when the trap is replaced &bull Easy strainer screen replacement &bull Optional blowdown valve &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos S-2 connector. Standard 360° Stainless Steel Connector &bull A compact, lightweight assembly &bull Standardization, reducing inventory &bull A compact design, simplifying piping &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer and bimetallic steam traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos standard connector.
Qty:
Part #:200190
- 5 1/4" VALVE BOX RISER 2-1/2in Extension Riser
$
27.40
Qty:
Qty:
Part #:200536
- Features and Advantages
&bull Sizes 3"-12" are Underwriters Laboratories Inc. Listed at 200 PSI for 3"-8" sizes and 175 PSI for 10"-12" sizes.For use on PC350 ductile iron and SCH40 steel pipe.&bull Bolt hole drilling is to ANSI B16.1 class 125.&bull Uses standard mechanical joint gasket for seal on DI Pipe and Transition Gasket on steel pipe.&bull Pipe fabrication can be done on site, using plain end pipe.&bull Flange Adapters are ideal for jobs involving retro-fitting.&bull Can be used on Ductile Iron (3"-36") and Steel (3"-12") Pipe -- steel pipe sizes require a transition gasket.&bull Can be used in above or below ground applications&bull If future maintenance is required, Flange Adapters can be easily disassembled.
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Part #:204350
- Stargrip Series 3000 Mechanical Joint Wedge Action Restraint for Ductile Iron Pipe
Material Specifications&bull Gland Ductile Iron per ASTM A536, Grade 65-45-12&bull Wedges Ductile Iron per ASTM A536, Grade 65-45-12 heat treated to a minimum of 370 BHN Wedge Finish Thermally cured fluoropolymer epoxy coating
Qty:
Part #:206920
- Material Cast Iron Per ASTM A48 Class 30B
$
72.50
Qty:
Displaying: 1 - 24 of 2,095 Matching Items