Fluke
Armstrong International


Displaying: 1 - 24 of 2,043 Matching Items
2,043 Items
View:
Active Filters :
Part #:301615

Key features DMM test leads (red, black) with safety shrouded, standard diameter banana plugs Right angle connector on one end and straight connector on the other Reinforced strain relief 1.5 meter silicone-insulated wire resists heat &amp cold CAT IV 600 V, CAT III 1000 V, 10 A rating. CSA listed One year warranty
$ 53.33
Part #:304993

Key features AC220 SureGrip&trade Alligator Clip Set TP1 Slim-Reach&trade Test Probes (flat bladed) TL224 SureGrip&trade Silicone Test Lead Set (straight to right) One year warranty
$ 103.89
Part #:306993

Key features &ldquoThis meter is perfect for my use as I do HVAC and Electrical work and this will give me what I need for troubleshooting and performance of equipment.&rdquo - Paul Automatically measure AC and DC voltage up to 600 V with precise digital resolution Measure current up to 100 A without breaking the circuit with OpenJaw&trade design Troubleshoot resistance problems up to 1000 &Omega Work in tight spaces with detachable Slim Reach probe tips
$ 196.02
Part #:307265

Key features Digital multimeter designed specifically for HVAC professionals Includes built-in thermometer to measure temperature from -40&degC to 400&degC (-40&degF to 752&degF) Provides microamps to test flame sensors Features low input impedance to helps prevent false readings due to ghost voltage Presents a large white LED backlight for working in poorly lit areas
$219.99 MSRP $ 219.44
closeout
Part #:309556

CLOSEOUTS Only 2 Left!
$ 159.15
Part #:310204

Key features Ultimate troubleshooting tool for electricians and instrumentation professionals Combines the functionality of a loop calibrator with the power of a precision 1000 V, 440 mA True-RMS digital multimeter Optional IR3000FC module for wireless data logging capabilities via Fluke Connect&reg mobile App Includes 24 V loop power supply Features a very large dual display with enhanced two-level backlight brightness settings
$1,114.99 MSRP $ 1,112.20
Part #:303473

Key features Durable ribbon sensor Measurement range -127 to 600 &degC One year warranty
$ 374.61
Part #:706624

Inverted Bucket Steam TrapsEnergy efficient because it's so reliable The inverted bucket is the most reliable steam trap operating principle known. The heart of its simple design is a unique leverage system that multiplies the force provided by the bucket to open the valve against pressure. Since the bucket is open at the bottom, it resists damage from water hammer, and wear points are heavily reinforced for long life. The inverted bucket has only two moving parts-the valve lever assembly and the bucket. That means no fixed points, no complicated linkage. Nothing to stick, bind or clog. Conserves energy even in the presence of wear Armstrong inverted bucket steam traps open and close based on the difference in density between condensate and steam-the inverted bucket principle. They open and close gently, minimizing wear. This simple fact means that inverted buckets are subject to less wear than some other types of traps. In fact, as an Armstrong inverted bucket trap wears, its tight seal actually improves. The valve and seat of the Armstrong trap provide essentially line contact-resulting in a tight seal because the entire closing force is concentrated on one narrow seating ring. An Armstrong inverted bucket steam trap continues to operate efficiently with use. Gradual wear slightly increases the diameter of the seat and alters the shape and diameter of the valve. But, as this occurs, a tight seal is still preserved-the ball merely seats itself more deeply. Corrosion-resistant parts The stainless steel valve and seat of the Armstrong inverted bucket steam trap are individually ground and lapped together in matched sets. All other working parts are wear- and corrosion-resistant stainless steel. Venting of air and CO2 The Armstrong inverted bucket provides continuous automatic air and CO2 venting with no cooling lag or threat of air binding. Operation against back pressure The Armstrong inverted bucket has excellent performance against back pressure. It has no adverse effect on inverted bucket operation other than to reduce its capacity by the low differential. The bucket simply requires less force to pull the valve open and cycle the trap. Freedom from dirt problems Armstrong designed its inverted bucket to be virtually free of dirt problems. The valve and seat are at the top of the trap, far away from the larger particles of dirt, which fall to the bottom. Here, the up-and-down action of the bucket pulverizes them. Since the valve of an inverted bucket is either fully closed or open, dirt particles pass freely. And the swift flow of condensate from under the bucket's edge creates a unique self-scrubbing action that sweeps dirt out of the trap.
$494.00 MSRP $ 386.91
Part #:706681

Steam Trap ConnectorsBesides 2000 Series stainless steel inverted bucket traps, the standard 360&deg connector or IS-2 connector with integral strainer can also be used on many Armstrong thermostatic, disc, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos two-bolt steam traps can use Armstrong connectors. IS-2 Stainless Steel Connector with Integral Strainer &bull A full line stainless steel strainer in the connector eliminates leak points and reduces installation time &bull A strainer that is not discarded when the trap is replaced &bull Easy strainer screen replacement &bull Optional blowdown valve &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos S-2 connector. Standard 360&deg Stainless Steel Connector &bull A compact, lightweight assembly &bull Standardization, reducing inventory &bull A compact design, simplifying piping &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer and bimetallic steam traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos standard connector.
$442.00 MSRP $ 346.19
Part #:708464

Steam Trap ConnectorsBesides 2000 Series stainless steel inverted bucket traps, the standard 360&deg connector or IS-2 connector with integral strainer can also be used on many Armstrong thermostatic, disc, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos two-bolt steam traps can use Armstrong connectors. IS-2 Stainless Steel Connector with Integral Strainer &bull A full line stainless steel strainer in the connector eliminates leak points and reduces installation time &bull A strainer that is not discarded when the trap is replaced &bull Easy strainer screen replacement &bull Optional blowdown valve &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos S-2 connector. Standard 360&deg Stainless Steel Connector &bull A compact, lightweight assembly &bull Standardization, reducing inventory &bull A compact design, simplifying piping &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer and bimetallic steam traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos standard connector.
$347.00 MSRP $ 271.78
Part #:300994

Previous Key features One pair (red, black) of nickel plated pincers open to 5 mm 11.4 cm flexible insulated shaft Recommended for use with TL222 and TL224 test leads CSA listed One year warranty Next Key features One pair (red, black) of nickel plated pincers open to 5 mm 11.4 cm flexible insulated shaft Recommended for use with TL222 and TL224 test leads CSA listed One year warranty
$ 69.15
Part #:300995

Key features SureGrip&trade AC285 has rubber overmolded surfaces for a firm reliable grip Multi-purpose tooth pattern grips anything from fine gauge wire to a 20 mm (0.75 in) nut Strong, nickel-plated steel jaws for a tight hold Conforms to safety standard IEC61010-0312002 +A12008, CAT III 1000 V, CAT IV 600 V 10 A maximum, pollution degree 2, 2000 m altitude Operating temperature -20 &degC to 55 &degC (-4 &degF to 131 &degF), 95% RH One-year warranty
$32.99 MSRP $ 32.90
Part #:300997

Key features Single probe pierces 0.25 to 1.5 mm insulated wire Small pin allows self-healing of the insulation 1000 V, 10 A maximum One year warranty
$52.99 MSRP $ 52.85
Part #:301012

Key features Zippered polyester carrying case with padding and inside pocket. Dimensions 218 x 128 x 64 mm (8.6 x 5 x 2.52 in) Recommended for 11x series, 87v, 32x series, and most mid-sized DMMs &ldquo...ample room for the quick reference card, the meter, and the leads (...) the material quality and construction should take abuse while protecting your expensive meter&rdquo- Jabit, verified customer
$ 58.08
Part #:301084

Key features Zippered carrying case with inside pocket belt loop and inside meter strap One year warranty
$49.99 MSRP $ 49.86
Part #:301182

Key features Zippered carrying case with inside pocket and belt loop One year warranty
$44.99 MSRP $ 44.87
closeout
Part #:301280

Availability: Will be backordered (Typically arrives in 14 days)
$ 299.23
$ 429.00
closeout
Part #:301376

CLOSEOUTS Only 1 Left!
$ 199.00
closeout
Part #:301485

CLOSEOUTS Only 1 Left!
$ 129.00
Part #:301506

$405.99 MSRP $ 404.97
closeout
Part #:301516

CLOSEOUTS Only 1 Left!
$ 329.00
 
Displaying: 1 - 24 of 2,043 Matching Items