CAT5 Connecctors
Electrical Equipment
View:
Active Filters :
- Main Category: Electrical Equipment
- Electrical Supplies: CAT5 Connecctors CAT6 Connectors
Part #:539-85-377
- CAT6 Feed-Thru Modular Plugs -100 pk
The IDEAL Feed-Thru CAT6 8P8C (eight position/eight contact) modular plug connector is the first feed-thru style connector and tool solution to offer a flush cut of the excess conductor to the face of the modular plug. A patent pending design enables conductors to be cut flush with the end face of the connector when used with the FT-45&trade tool (30-495). The flush cut eliminates inadvertent contact among adjacent conductors or with the mating jack. Conductor spacing is maintained for reliable performance in PoE and data applications.
Feed-Thru connectors have several additional advantages and improvements to traditional closed end modular plugs in assembly and termination
As conductors feed-thru the connector face, all are visibly inserted far enough to be pierced by the pin below - eliminates short wires or opens.
Conductor order can then be verified before the connector is crimped. This elimates wasted connectors, saves time in assembly, and reduces the chances of finding an error during a wiremap test of the cable.
The cable can be pushed or pulled into the connector to ensure that the twisted pairs are within 1/4" of the pin contacts and that the jacket is seated beyond the primary strain relief for a secure connection-better NEXT performance, minimal untwisted wires.
CAT6 single piece connector, no special assembly or sled & liner required help to simplify the assembly process - no measuring or exact cutting required. Same assembly as CAT5e Feed-Thru, just remove the cable spline if present.
Feed-Thru 8 position, 8 contact RJ-45 modular plug for 23 AWG CAT6, 100&Omega balanced twisted pair 250 MHz cables. Compatible with most 24 AWG CAT5e cables as well.
50 micro-inch gold plating on contact mating area for long term reliability in connectivity, even after hundreds of mating cycles.
Complies with industry standard mechanical and electrical specifications for compatibility with compliant modular jacks and ports.
Designed to work seamlessly with IDEAL FT-45&trade Modular Plug Crimp Tool. Also compatible for crimping (no cutting of conductors) in the IDEAL Telemaster&trade crimping tools.
Three prong contact design for use with solid or stranded 23-24 AWG insulated copper conductors up to 0.041" in diameter.
Accepts outer jacket cable diameters up to .280"
Permanent connection - once crimped they cannot be reused
Primary strain relief support retains cable jacket and minimizes conductor movement once crimped.
Optional external strain relief boots are available.
Qty:
Part #:539-85-346
- CAT5e RJ-45 8P8C Modular Plugs -25 pk
CAT5e 8P8C (eight position/eight contact) modular plug connectors which support TIA/EIA standards for twisted pair cabling up to 100 MHz. IDEAL modular plugs are designed to work seamlessly with the IDEAL Telemaster&trade and FT-45&trade series of modular plug crimp tools. Plugs are designed and manufactured to support all 100&Omega cable wiring schemes including the widely used TIA-568A and TIA-568B configurations.
IDEAL modular plugs are manufactured to strict industry standards and tolerances that utilize traditional preparation and termination methods. These proven and preferred methods allow for improved compatibility among manufacturers and devices around the world without the need for special tooling or preparation methods and eliminate the risk of shorts and crosstalk often associated with open end or feed through type connectors.
8 position, 8 contact RJ-45 modular plug for CAT5e, 100&Omega balanced twisted pair 100 MHz cables
50 micro-inch gold plating on contact mating area for long term reliability in connectivity, even after hundreds of mating cycles
Complies with industry standard mechanical and electrical specifications for compatibility with compliant modular jacks and ports
Designed to work seamlessly with IDEAL Telemaster&trade crimping tools. Also compatible with industry standard modular plug crimping tools meeting specifications.
Three prong contact design for use with solid or stranded 24-26 AWG insulated copper conductors. Max conductor diameter of 0.042"/1.07mm. Max recommended cable outer jacket diameter 0.270"/ 6.8mm.
Permanent connection - once crimped they cannot be reused
Primary and secondary strain relief supports to retain cable jacket and minimize conductor movement once crimped
Non-feed through design to prevent external conductor/device shorting and RF signal leakage
Optional external strain relief boots are available.
8 position, 8 contact RJ-45 modular plug for CAT5e, 100&Omega balanced twisted pair 100 MHz cables
50 micro-inch gold plating on contact mating area for long term reliability in connectivity, even after hundreds of mating cycles
Complies with industry standard mechanical and electrical specifications for compatibility with compliant modular jacks and ports
Designed to work seamlessly with IDEAL Telemaster&trade crimping tools. Also compatible with industry standard modular plug crimping tools meeting specifications.
Three prong contact design for use with solid or stranded 24-26 AWG insulated copper conductors
Qty:
Displaying: 1 - 2 of 2 Matching Items