CAT5 Connecctors
Electrical Equipment
View:
Active Filters :
- Main Category: Electrical Equipment
- Electrical Supplies: CAT5 Connecctors Wire Ties
Part #:303544
- Cable Tie, 8", 18 lb., Natural, 100/Bag
Agency Compliant
UL Approved, CSA Approved, Mil-Spec Approved, RoHs Compliant Products
Quality Construction
One-piece design for added strength
Superior locking mechanism
Exceeds industry tensile strength ratings
Low Insertion Force
Tapered thin tip reduces initial friction
Lowest insertion force with high tensile strength
Reduces installation fatigue
No Burrs or Sharp Edges
Smooth corners provide added safety
Rounded edges eliminate insulation damage
Stepped Tail Gripper
Tapered tail grip assures positive threading
Stepped tail allows for easier grabbing and tightening once engaged
Angled Tail
Provides quicker initial insertion
Lowers installation costs
One-piece design for added strength
Tapered thin tip reduces initial friction
$
16.34
Qty:
Part #:539-B-11-50-0-C
- Cable Tie, 11", 50 lb., UV Black, 100/pack
General purpose cable tie for building and cable management
Agency approved UL Listed, CSA Listed and Plenum Rated
Qty:
Part #:539-85-346
- CAT5e RJ-45 8P8C Modular Plugs -25 pk
CAT5e 8P8C (eight position/eight contact) modular plug connectors which support TIA/EIA standards for twisted pair cabling up to 100 MHz. IDEAL modular plugs are designed to work seamlessly with the IDEAL Telemaster&trade and FT-45&trade series of modular plug crimp tools. Plugs are designed and manufactured to support all 100&Omega cable wiring schemes including the widely used TIA-568A and TIA-568B configurations.
IDEAL modular plugs are manufactured to strict industry standards and tolerances that utilize traditional preparation and termination methods. These proven and preferred methods allow for improved compatibility among manufacturers and devices around the world without the need for special tooling or preparation methods and eliminate the risk of shorts and crosstalk often associated with open end or feed through type connectors.
8 position, 8 contact RJ-45 modular plug for CAT5e, 100&Omega balanced twisted pair 100 MHz cables
50 micro-inch gold plating on contact mating area for long term reliability in connectivity, even after hundreds of mating cycles
Complies with industry standard mechanical and electrical specifications for compatibility with compliant modular jacks and ports
Designed to work seamlessly with IDEAL Telemaster&trade crimping tools. Also compatible with industry standard modular plug crimping tools meeting specifications.
Three prong contact design for use with solid or stranded 24-26 AWG insulated copper conductors. Max conductor diameter of 0.042"/1.07mm. Max recommended cable outer jacket diameter 0.270"/ 6.8mm.
Permanent connection - once crimped they cannot be reused
Primary and secondary strain relief supports to retain cable jacket and minimize conductor movement once crimped
Non-feed through design to prevent external conductor/device shorting and RF signal leakage
Optional external strain relief boots are available.
8 position, 8 contact RJ-45 modular plug for CAT5e, 100&Omega balanced twisted pair 100 MHz cables
50 micro-inch gold plating on contact mating area for long term reliability in connectivity, even after hundreds of mating cycles
Complies with industry standard mechanical and electrical specifications for compatibility with compliant modular jacks and ports
Designed to work seamlessly with IDEAL Telemaster&trade crimping tools. Also compatible with industry standard modular plug crimping tools meeting specifications.
Three prong contact design for use with solid or stranded 24-26 AWG insulated copper conductors
Qty:
Part #:539-IT3I-C0
- Cable Tie, 11", 40 lb., UV Black, 100/Bag
Quality Construction
One-piece design for added strength
Superior locking mechanism
Exceeds industry tensile strength ratings
Low Insertion Force
Tapered thin tip reduces initial friction
Lowest insertion force with high tensile strength
Reduces installation fatigue
No Burrs or Sharp Edges
Smooth corners provide added safety
Rounded edges eliminate insulation damage
Stepped Tail Gripper
Tapered tail grip assures positive threading
Stepped tail allows for easier grabbing and tightening once engaged
Angled Tail
Provides quicker initial insertion
Lowers installation costs
One-piece design for added strength
Tapered thin tip reduces initial friction
Tapered tall grip assures positive threading
Qty:
Part #:539-IT3S-C0
- Cable Tie, 11", 50 lb., UV Black, 100/Bag
Agency Compliant
UL Approved, CSA Approved, Mil-Spec Approved, RoHs Compliant Products
Quality Construction
One-piece design for added strength
Superior locking mechanism
Exceeds industry tensile strength ratings
Low Insertion Force
Tapered thin tip reduces initial friction
Lowest insertion force with high tensile strength
Reduces installation fatigue
No Burrs or Sharp Edges
Smooth corners provide added safety
Rounded edges eliminate insulation damage
Stepped Tail Gripper
Tapered tail grip assures positive threading
Stepped tail allows for easier grabbing and tightening once engaged
Angled Tail
Provides quicker initial insertion
Lowers installation costs
UL Listed, CSA Listed, Mil-Spec Approved, RoHs Compliant
Quality construction
Low insertion force
No burrs or sharp edges
Stepped tail gripper
Angled tail
Qty:
Part #:306674
- Cable Tie, 14", 50 lb., UV Black, 100/Bag
Agency Compliant
UL Approved, CSA Approved, Mil-Spec Approved, RoHs Compliant Products
Quality Construction
One-piece design for added strength
Superior locking mechanism
Exceeds industry tensile strength ratings
Low Insertion Force
Tapered thin tip reduces initial friction
Lowest insertion force with high tensile strength
Reduces installation fatigue
No Burrs or Sharp Edges
Smooth corners provide added safety
Rounded edges eliminate insulation damage
Stepped Tail Gripper
Tapered tail grip assures positive threading
Stepped tail allows for easier grabbing and tightening once engaged
Angled Tail
Provides quicker initial insertion
Lowers installation costs
UL Listed, CSA Listed, Mil-Spec Approved, RoHs Compliant
Quality construction
Low insertion force
No burrs or sharp edges
Stepped tail gripper
Angled tail
$
38.35
BAG
Qty:
Part #:539-IT5LH-L
- Cable Tie, 17", 120 lb., Natural, 50/Bag
Quality Construction
One-piece design for added strength
Superior locking mechanism
Exceeds industry tensile strength ratings
Low Insertion Force
Tapered thin tip reduces initial friction
Lowest insertion force with high tensile strength
Reduces installation fatigue
No Burrs or Sharp Edges
Smooth corners provide added safety
Rounded edges eliminate insulation damage
Stepped Tail Gripper
Tapered tail grip assures positive threading
Stepped tail allows for easier grabbing and tightening once engaged
Angled Tail
Provides quicker initial insertion
Lowers installation costs
UL Compliant, CSA Compliant, MIL-Spec Approved, RoHs Compliant
One-piece design for added strength
Tapered thin tip reduces initial friction
Smooth corners provide added safety
Tapered tall grip assures positive threading
Stepped tail allows for easier grabbing
Qty:
Part #:539-IT3SMH-C0
- Cable Tie, Mounting Head, 11", 50 lb., Natural, 100/Bag
UL Listed nylon 6/6 cable ties
Secures and positions wire bundles, cables, hoses, etc. to panels or other surfaces with on fastener to reduce time and cost
Allows bundling before and after mounting
Color
Natural
Screw Size
No. 10
Cable Tie Type
Standard
Cable Tie Length
11.2"
$
0.66
Qty:
Part #:539-IT750MP-C
- Mounting Pad, 3/4", Adhesive, #4 Screw, Natural, 100/Bag
Lead-N-Feature allows easy insertion for hard to reach applications
Four-sided entry slots save time during placement orientation
Smooth radius cradle eliminates possible damage to cable while providing stable support
Low profile is essential in confined spaces
UL Recognized, rubber adhesive fixing device
Slot Height .05"
Slot Width .20"
$
43.10
Qty:
Part #:539-IT1-5I-C
- Cable Tie, 6", 40 lb., Natural, 100/Bag
Quality Construction
One-piece design for added strength
Superior locking mechanism
Exceeds industry tensile strength ratings
Low Insertion Force
Tapered thin tip reduces initial friction
Lowest insertion force with high tensile strength
Reduces installation fatigue
No Burrs or Sharp Edges
Smooth corners provide added safety
Rounded edges eliminate insulation damage
Stepped Tail Gripper
Tapered tail grip assures positive threading
Stepped tail allows for easier grabbing and tightening once engaged
Angled Tail
Provides quicker initial insertion
Lowers installation costs
Qty:
Part #:539-IT3S-CO
- Cable Tie, 11", 50 lb., Natural, 100/Bag
Agency Compliant
UL Approved, CSA Approved, Mil-Spec Approved, RoHs Compliant Products
Quality Construction
More Information
Reviews
#IDEALelectrical
One-piece design for added strength
Superior locking mechanism
Exceeds industry tensile strength ratings
Low Insertion Force
Tapered thin tip reduces initial friction
Lowest insertion force with high tensile strength
Reduces installation fatigue
No Burrs or Sharp Edges
Smooth corners provide added safety
Rounded edges eliminate insulation damage
Stepped Tail Gripper
Tapered tail grip assures positive threading
Stepped tail allows for easier grabbing and tightening once engaged
Angled Tail
Provides quicker initial insertion
Lowers installation costs
UL Listed, CSA Listed, Mil-Spec Approved, RoHs Compliant
Quality construction
Low insertion force
No burrs or sharp edges
Stepped tail gripper
Angled tail
Qty:
Displaying: 1 - 11 of 11 Matching Items