Heat Shrink
Electrical Equipment
View:
Active Filters :
- Main Category: Electrical Equipment
- Electrical Supplies: Heat Shrink Wire Ties
Part #:303544
- Cable Tie, 8", 18 lb., Natural, 100/Bag
Agency Compliant
UL Approved, CSA Approved, Mil-Spec Approved, RoHs Compliant Products
Quality Construction
One-piece design for added strength
Superior locking mechanism
Exceeds industry tensile strength ratings
Low Insertion Force
Tapered thin tip reduces initial friction
Lowest insertion force with high tensile strength
Reduces installation fatigue
No Burrs or Sharp Edges
Smooth corners provide added safety
Rounded edges eliminate insulation damage
Stepped Tail Gripper
Tapered tail grip assures positive threading
Stepped tail allows for easier grabbing and tightening once engaged
Angled Tail
Provides quicker initial insertion
Lowers installation costs
One-piece design for added strength
Tapered thin tip reduces initial friction
$
16.34
Qty:
Part #:539-46-601
- Thermo-Shrink® Thin-Wall Heat Shrink Disk, 4' Length, 1/16" ID
Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience
Use to bundle wires for very flexible light-duty harnesses
Highly flame-retardant and flexible resistant to common fluids and solvents
Meets UL 486D 125°C VW-1 600V Material No PBB&rsquos, PBBE&rsquos, conforms to ROHS
21 shrink ratio Minimum shrink temperature 70°C Operating temperature -55°C to +125°C
RoHS compliant
UV resistant
Qty:
Part #:539-46-602
- Thermo-Shrink® Thin-Wall Heat Shrink Disk, 4' Length, 3/32" ID
Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience
Use to bundle wires for very flexible light-duty harnesses
Highly flame-retardant and flexible resistant to common fluids and solvents
Meets UL 486D 125°C VW-1 600V Material No PBB&rsquos, PBBE&rsquos, conforms to ROHS
21 shrink ratio Minimum shrink temperature 70°C Operating temperature -55°C to +125°C
RoHS compliant
UV resistant
Qty:
Part #:539-46-604
- Thermo-Shrink® Thin-Wall Heat Shrink Disk, 4' Length, 3/16" ID
Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience
Use to bundle wires for very flexible light-duty harnesses
Highly flame-retardant and flexible resistant to common fluids and solvents
Meets UL 486D 125°C VW-1 600V Material No PBB&rsquos, PBBE&rsquos, conforms to ROHS
21 shrink ratio Minimum shrink temperature 70°C Operating temperature -55°C to +125°C
RoHS compliant
UV resistant
Qty:
Part #:539-B-11-50-0-C
- Cable Tie, 11", 50 lb., UV Black, 100/pack
General purpose cable tie for building and cable management
Agency approved UL Listed, CSA Listed and Plenum Rated
Qty:
Part #:310794
- Thermo-Shrink® Heavy-Wall Heat Shrink, 9" Length, 6-1 AWG
TS-46 irradiated cross-linked polyolefin with 31 standard shrink ratio
Adhesive liner provides complete insulation and protection to electrical splices in above-grade, underground or underwater applications
Maximum flame retardancy
Meets UL 486D, CSA C22.2 No. 198.2, ANSI C119.1, Western Underground Guides Nos. 2.4, 2.5, MIL-DTL-23053/15, IEEE 383 Vertical Flame Test, ANSI C37.20.2, ICEA S-19-8 and NEMA insulation thickness requirements
Rated for 600V, 90°C continuous use
Qty:
Part #:808975
- Thermo-Shrink® Thin-Wall Heat Shrink Disk, 4' Length, 1/8" ID
Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience
Use to bundle wires for very flexible light-duty harnesses
Highly flame-retardant and flexible resistant to common fluids and solvents
Meets UL 486D 125°C VW-1 600V Material No PBB&rsquos, PBBE&rsquos, conforms to ROHS
21 shrink ratio Minimum shrink temperature 70°C Operating temperature -55°C to +125°C
RoHS compliant
UV resistant
Part #:306687
- Thermo-Shrink® Thin-Wall Heat Shrink Disk, 4' Length, 5/16" ID
Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience
Use to bundle wires for very flexible light-duty harnesses
Highly flame-retardant and flexible resistant to common fluids and solvents
Meets UL 486D 125°C VW-1 600V Material No PBB&rsquos, PBBE&rsquos, conforms to ROHS
21 shrink ratio Minimum shrink temperature 70°C Operating temperature -55°C to +125°C
RoHS compliant
UV resistant
Qty:
Part #:803691
- Thermo-Shrink® Thin-Wall Heat Shrink Disk, 4' Length, 1/2" ID
Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience
Use to bundle wires for very flexible light-duty harnesses
Highly flame-retardant and flexible resistant to common fluids and solvents
Meets UL 486D 125°C VW-1 600V Material No PBB&rsquos, PBBE&rsquos, conforms to ROHS
21 shrink ratio Minimum shrink temperature 70°C Operating temperature -55°C to +125°C
RoHS compliant
UV resistant
Qty:
Part #:310947
- Thermo-Shrink® Heavy-Wall Heat Shrink, 9" Length, 4/0-400 MCM
TS-46 irradiated cross-linked polyolefin with 31 standard shrink ratio
Adhesive liner provides complete insulation and protection to electrical splices in above-grade, underground or underwater applications
Maximum flame retardancy
Meets UL 486D, CSA C22.2 No. 198.2, ANSI C119.1, Western Underground Guides Nos. 2.4, 2.5, MIL-DTL-23053/15, IEEE 383 Vertical Flame Test, ANSI C37.20.2, ICEA S-19-8 and NEMA insulation thickness requirements
Rated for 600V, 90°C continuous use
Qty:
Part #:311426
- Thermo-Shrink® Heavy-Wall Heat Shrink, 9" Length, 500-1,000 MCM
TS-46 irradiated cross-linked polyolefin with 31 standard shrink ratio
Adhesive liner provides complete insulation and protection to electrical splices in above-grade, underground or underwater applications
Maximum flame retardancy
Meets UL 486D, CSA C22.2 No. 198.2, ANSI C119.1, Western Underground Guides Nos. 2.4, 2.5, MIL-DTL-23053/15, IEEE 383 Vertical Flame Test, ANSI C37.20.2, ICEA S-19-8 and NEMA insulation thickness requirements
Rated for 600V, 90°C continuous use
Qty:
Part #:806554
- Thermo-Shrink® Thin-Wall Heat Shrink Disk, 4' Length, 1/4" ID
Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience
Use to bundle wires for very flexible light-duty harnesses
Highly flame-retardant and flexible resistant to common fluids and solvents
Meets UL 486D 125°C VW-1 600V Material No PBB&rsquos, PBBE&rsquos, conforms to ROHS
21 shrink ratio Minimum shrink temperature 70°C Operating temperature -55°C to +125°C
RoHS compliant
UV resistant
Qty:
Part #:539-46-609
- Thermo-Shrink® Thin-Wall Heat Shrink Disk, 4' Length, 3/4" ID
Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience
Use to bundle wires for very flexible light-duty harnesses
Highly flame-retardant and flexible resistant to common fluids and solvents
Meets UL 486D 125°C VW-1 600V Material No PBB&rsquos, PBBE&rsquos, conforms to ROHS
21 shrink ratio Minimum shrink temperature 70°C Operating temperature -55°C to +125°C
RoHS compliant
UV resistant
Qty:
Part #:539-IT3I-C0
- Cable Tie, 11", 40 lb., UV Black, 100/Bag
Quality Construction
One-piece design for added strength
Superior locking mechanism
Exceeds industry tensile strength ratings
Low Insertion Force
Tapered thin tip reduces initial friction
Lowest insertion force with high tensile strength
Reduces installation fatigue
No Burrs or Sharp Edges
Smooth corners provide added safety
Rounded edges eliminate insulation damage
Stepped Tail Gripper
Tapered tail grip assures positive threading
Stepped tail allows for easier grabbing and tightening once engaged
Angled Tail
Provides quicker initial insertion
Lowers installation costs
One-piece design for added strength
Tapered thin tip reduces initial friction
Tapered tall grip assures positive threading
Qty:
Part #:539-IT3S-C0
- Cable Tie, 11", 50 lb., UV Black, 100/Bag
Agency Compliant
UL Approved, CSA Approved, Mil-Spec Approved, RoHs Compliant Products
Quality Construction
One-piece design for added strength
Superior locking mechanism
Exceeds industry tensile strength ratings
Low Insertion Force
Tapered thin tip reduces initial friction
Lowest insertion force with high tensile strength
Reduces installation fatigue
No Burrs or Sharp Edges
Smooth corners provide added safety
Rounded edges eliminate insulation damage
Stepped Tail Gripper
Tapered tail grip assures positive threading
Stepped tail allows for easier grabbing and tightening once engaged
Angled Tail
Provides quicker initial insertion
Lowers installation costs
UL Listed, CSA Listed, Mil-Spec Approved, RoHs Compliant
Quality construction
Low insertion force
No burrs or sharp edges
Stepped tail gripper
Angled tail
Qty:
Part #:306674
- Cable Tie, 14", 50 lb., UV Black, 100/Bag
Agency Compliant
UL Approved, CSA Approved, Mil-Spec Approved, RoHs Compliant Products
Quality Construction
One-piece design for added strength
Superior locking mechanism
Exceeds industry tensile strength ratings
Low Insertion Force
Tapered thin tip reduces initial friction
Lowest insertion force with high tensile strength
Reduces installation fatigue
No Burrs or Sharp Edges
Smooth corners provide added safety
Rounded edges eliminate insulation damage
Stepped Tail Gripper
Tapered tail grip assures positive threading
Stepped tail allows for easier grabbing and tightening once engaged
Angled Tail
Provides quicker initial insertion
Lowers installation costs
UL Listed, CSA Listed, Mil-Spec Approved, RoHs Compliant
Quality construction
Low insertion force
No burrs or sharp edges
Stepped tail gripper
Angled tail
$
38.35
BAG
Qty:
Part #:539-IT5LH-L
- Cable Tie, 17", 120 lb., Natural, 50/Bag
Quality Construction
One-piece design for added strength
Superior locking mechanism
Exceeds industry tensile strength ratings
Low Insertion Force
Tapered thin tip reduces initial friction
Lowest insertion force with high tensile strength
Reduces installation fatigue
No Burrs or Sharp Edges
Smooth corners provide added safety
Rounded edges eliminate insulation damage
Stepped Tail Gripper
Tapered tail grip assures positive threading
Stepped tail allows for easier grabbing and tightening once engaged
Angled Tail
Provides quicker initial insertion
Lowers installation costs
UL Compliant, CSA Compliant, MIL-Spec Approved, RoHs Compliant
One-piece design for added strength
Tapered thin tip reduces initial friction
Smooth corners provide added safety
Tapered tall grip assures positive threading
Stepped tail allows for easier grabbing
Qty:
Part #:539-IT3SMH-C0
- Cable Tie, Mounting Head, 11", 50 lb., Natural, 100/Bag
UL Listed nylon 6/6 cable ties
Secures and positions wire bundles, cables, hoses, etc. to panels or other surfaces with on fastener to reduce time and cost
Allows bundling before and after mounting
Color
Natural
Screw Size
No. 10
Cable Tie Type
Standard
Cable Tie Length
11.2"
$
0.66
Qty:
Part #:539-IT750MP-C
- Mounting Pad, 3/4", Adhesive, #4 Screw, Natural, 100/Bag
Lead-N-Feature allows easy insertion for hard to reach applications
Four-sided entry slots save time during placement orientation
Smooth radius cradle eliminates possible damage to cable while providing stable support
Low profile is essential in confined spaces
UL Recognized, rubber adhesive fixing device
Slot Height .05"
Slot Width .20"
$
43.10
Qty:
Part #:539-IT1-5I-C
- Cable Tie, 6", 40 lb., Natural, 100/Bag
Quality Construction
One-piece design for added strength
Superior locking mechanism
Exceeds industry tensile strength ratings
Low Insertion Force
Tapered thin tip reduces initial friction
Lowest insertion force with high tensile strength
Reduces installation fatigue
No Burrs or Sharp Edges
Smooth corners provide added safety
Rounded edges eliminate insulation damage
Stepped Tail Gripper
Tapered tail grip assures positive threading
Stepped tail allows for easier grabbing and tightening once engaged
Angled Tail
Provides quicker initial insertion
Lowers installation costs
Qty:
Part #:539-IT3S-CO
- Cable Tie, 11", 50 lb., Natural, 100/Bag
Agency Compliant
UL Approved, CSA Approved, Mil-Spec Approved, RoHs Compliant Products
Quality Construction
More Information
Reviews
#IDEALelectrical
One-piece design for added strength
Superior locking mechanism
Exceeds industry tensile strength ratings
Low Insertion Force
Tapered thin tip reduces initial friction
Lowest insertion force with high tensile strength
Reduces installation fatigue
No Burrs or Sharp Edges
Smooth corners provide added safety
Rounded edges eliminate insulation damage
Stepped Tail Gripper
Tapered tail grip assures positive threading
Stepped tail allows for easier grabbing and tightening once engaged
Angled Tail
Provides quicker initial insertion
Lowers installation costs
UL Listed, CSA Listed, Mil-Spec Approved, RoHs Compliant
Quality construction
Low insertion force
No burrs or sharp edges
Stepped tail gripper
Angled tail
Qty:
Displaying: 1 - 21 of 21 Matching Items