CAT6 Connectors
Electrical Equipment
View:
Active Filters :
- Main Category: Electrical Equipment
- Electrical Supplies: CAT6 Connectors Pulling Lube
Part #:307274
- Yellow 77® Plus, 1-Quart Squeeze Bottle
IDEAL Yellow 77® Plus Wire pulling lubricant is a wax-based formula offering superior lubricity due to the Rapid Glide&trade polytetrafluoroethylene additive &mdash great for tough pulls. It is safe to use with all cable types. It won't break down/separate after repeated exposure to freezing temperatures and dries to a thin, non-conductive film that won't clog conduit. Yellow 77® Plus has a creamy texture and clings to cable throughout long pulls. Apply conveniently and uniformly by hand or brush. It is a homogeneous blend that requires no mixing and forms surface coat to control evaporation, so it won't dry out. It is environmentally safe, non-toxic, non-flammable and non-corrosive for user safety. Lubricant remains stable in high temperature from 32°F to 190°F (0°C to 88°C). It comes in 1 qt squeeze bottle, 1-gallon bucket, and 5-gallon bucket. Lubricant is UL listed.
Rapid Glide&trade polytetrafluoroethylene additive provides greater lubricity than other wax-based lubricants &mdash great for tough pulls
Safe to use with all cable types
Clings to cable throughout long runs, even where moisture is present
Remains temperature stable from 32°F to 190°F (0°C to 88°C)
Environmentally safe &ndash non-toxic, non-flammable and non-corrosive
Qty:
closeout
$
7.25
Qty:
Part #:307340
- Yellow 77®, 5-Gallon Bucket
IDEAL Yellow 77® Wire pulling lubricant is a wax-based formula, and is the perfect general purpose lube. It is safe to use with most cable types except low-density polyethylene and semi-conducting jackets. It won't break down/separate after repeated exposure to freezing temperatures and dries to a thin, non-conductive film that won't clog conduit. Yellow 77® has a creamy texture and clings to cable throughout long pulls. Apply conveniently and uniformly by hand or brush. It is a homogeneous blend that requires no mixing and forms surface coat to control evaporation, so it won't dry out. It is environmentally safe, non-toxic, non-flammable and non-corrosive for user safety. Lubricant remains stable in high temperature of 32°F to 130°F (0°C to 54°C). It comes in 1 qt squeeze bottle, 1-gallon bucket, 5-gallon bucket, and 55 gallon drum. Lubricant is UL listed.
Safe to use with most cable types except low-density polyethylene and semi-conducting jackets
Clings to cable throughout long runs, even where moisture is present
Remains temperature stable from 32°F to 130°F (0°C to 54°C)
Dries slowly to a thin, non-conductive film that won&rsquot harden in conduit
Environmentally safe &ndash non-toxic, non-flammable and non-corrosive
Qty:
Part #:539-85-377
- CAT6 Feed-Thru Modular Plugs -100 pk
The IDEAL Feed-Thru CAT6 8P8C (eight position/eight contact) modular plug connector is the first feed-thru style connector and tool solution to offer a flush cut of the excess conductor to the face of the modular plug. A patent pending design enables conductors to be cut flush with the end face of the connector when used with the FT-45&trade tool (30-495). The flush cut eliminates inadvertent contact among adjacent conductors or with the mating jack. Conductor spacing is maintained for reliable performance in PoE and data applications.
Feed-Thru connectors have several additional advantages and improvements to traditional closed end modular plugs in assembly and termination
As conductors feed-thru the connector face, all are visibly inserted far enough to be pierced by the pin below - eliminates short wires or opens.
Conductor order can then be verified before the connector is crimped. This elimates wasted connectors, saves time in assembly, and reduces the chances of finding an error during a wiremap test of the cable.
The cable can be pushed or pulled into the connector to ensure that the twisted pairs are within 1/4" of the pin contacts and that the jacket is seated beyond the primary strain relief for a secure connection-better NEXT performance, minimal untwisted wires.
CAT6 single piece connector, no special assembly or sled & liner required help to simplify the assembly process - no measuring or exact cutting required. Same assembly as CAT5e Feed-Thru, just remove the cable spline if present.
Feed-Thru 8 position, 8 contact RJ-45 modular plug for 23 AWG CAT6, 100&Omega balanced twisted pair 250 MHz cables. Compatible with most 24 AWG CAT5e cables as well.
50 micro-inch gold plating on contact mating area for long term reliability in connectivity, even after hundreds of mating cycles.
Complies with industry standard mechanical and electrical specifications for compatibility with compliant modular jacks and ports.
Designed to work seamlessly with IDEAL FT-45&trade Modular Plug Crimp Tool. Also compatible for crimping (no cutting of conductors) in the IDEAL Telemaster&trade crimping tools.
Three prong contact design for use with solid or stranded 23-24 AWG insulated copper conductors up to 0.041" in diameter.
Accepts outer jacket cable diameters up to .280"
Permanent connection - once crimped they cannot be reused
Primary strain relief support retains cable jacket and minimizes conductor movement once crimped.
Optional external strain relief boots are available.
Qty:
Part #:539-31-391
- Yellow 77® Plus, 1-Gallon Bucket
IDEAL Yellow 77® Plus Wire pulling lubricant is a wax-based formula offering superior lubricity due to the Rapid Glide&trade polytetrafluoroethylene additive &mdash great for tough pulls. It is safe to use with all cable types. It won't break down/separate after repeated exposure to freezing temperatures and dries to a thin, non-conductive film that won't clog conduit. Yellow 77® Plus has a creamy texture and clings to cable throughout long pulls. Apply conveniently and uniformly by hand or brush. It is a homogeneous blend that requires no mixing and forms surface coat to control evaporation, so it won't dry out. It is environmentally safe, non-toxic, non-flammable and non-corrosive for user safety. Lubricant remains stable in high temperature from 32°F to 190°F (0°C to 88°C). It comes in 1 qt squeeze bottle, 1-gallon bucket, and 5-gallon bucket. Lubricant is UL listed.
Rapid Glide&trade polytetrafluoroethylene additive provides greater lubricity than other wax-based lubricants &mdash great for tough pulls
Safe to use with all cable types
Clings to cable throughout long runs, even where moisture is present
Remains temperature stable from 32°F to 190°F (0°C to 88°C)
Environmentally safe &ndash non-toxic, non-flammable and non-corrosive
Qty:
Displaying: 1 - 5 of 5 Matching Items