Crimp Connectors
Electrical Equipment
View:
Active Filters :
- Main Category: Electrical Equipment
- Electrical Supplies: Crimp Connectors Wire Ties
Part #:303544
- Cable Tie, 8", 18 lb., Natural, 100/Bag
Agency Compliant
UL Approved, CSA Approved, Mil-Spec Approved, RoHs Compliant Products
Quality Construction
One-piece design for added strength
Superior locking mechanism
Exceeds industry tensile strength ratings
Low Insertion Force
Tapered thin tip reduces initial friction
Lowest insertion force with high tensile strength
Reduces installation fatigue
No Burrs or Sharp Edges
Smooth corners provide added safety
Rounded edges eliminate insulation damage
Stepped Tail Gripper
Tapered tail grip assures positive threading
Stepped tail allows for easier grabbing and tightening once engaged
Angled Tail
Provides quicker initial insertion
Lowers installation costs
One-piece design for added strength
Tapered thin tip reduces initial friction
$
16.34
Qty:
Part #:539-83-0351
- Non-Insulated Ring Terminal, 12-10 AWG, 1/4" Stud, Box of 25
The complete line of IDEAL® crimp terminals, disconnects, and splices offer the right product for any electrical system that might be encountered. From rings and spades to insulated disconnects, there is a product for any wire range. All insulated terminals are color-coded for easy identification and come in durable plastic packaging for easy storage.
Butted seam-construction prevents splitting under maximum pressure
Internal barrel serrations grip wires tightly to resist pull-out and reduce electrical resistance
Tin-plated brass construction for corrosion resistance
Shouldered barrel insulation quickly positions terminal for proper crimping
Expanded insulation entry accommodates a wide variety of insulation diameters and provides additional insulation support
Qty:
Part #:539-83-9401
- Non-Insulated Female Flag Disconnect, 16-14 AWG, .250", Box of 25
The complete line of IDEAL crimp terminals, disconnects, and splices offer the right product for any electrical system that might be encountered. From rings and spades to insulated disconnects, there is a product for any wire range. All insulated terminals are color-coded for easy identification and come in durable plastic packaging for easy storage.
Qty:
Part #:539-B-11-50-0-C
- Cable Tie, 11", 50 lb., UV Black, 100/pack
General purpose cable tie for building and cable management
Agency approved UL Listed, CSA Listed and Plenum Rated
Qty:
Part #:539-83-7231
- Vinyl Insulated Spade Terminal, 12-10 AWG, 1/4" Stud, Box of 25
The complete line of IDEAL crimp terminals, disconnects, and splices offer the right product for any electrical system that might be encountered. From rings and spades to insulated disconnects, there is a product for any wire range. All insulated terminals are color-coded for easy identification and come in durable plastic packaging for easy storage.
Butted-seam construction prevents splitting under maximum pressure
Internal barrel serrations grip wires tightly to resist pull-out and reduce electrical resistance
Tin-plated brass construction for corrosion resistance
Shouldered barrel insulation quickly positions terminal for proper crimping
Expanded insulation entry accommodates a wide variety of insulation diameters and provides additional insulation support
Qty:
Part #:539-83-9781
- Nylon Fully-Insulated Female Disconnect, 16-14 AWG, Box of 25
The complete line of IDEAL crimp terminals, disconnects, and splices offer the right product for any electrical system that might be encountered. From rings and spades to insulated disconnects, there is a product for any wire range. All insulated terminals are color-coded for easy identification and come in durable plastic packaging for easy storage.
Butted seam-construction prevents splitting under maximum pressure
Internal barrel serrations grip wires tightly to resist pull-out and reduce electrical resistance
Tin-plated brass construction for corrosion resistance
Shouldered barrel insulation quickly positions terminal for proper crimping
Expanded insulation entry accommodates a wide variety of insulation diameters and provides additional insulation support
Qty:
Part #:539-83-9921
- Nylon Fully-Insulated Male Disconnect, 16-14 AWG, .250", Box of 25
The complete line of IDEAL crimp terminals, disconnects, and splices offer the right product for any electrical system that might be encountered. From rings and spades to insulated disconnects, there is a product for any wire range. All insulated terminals are color-coded for easy identification and come in durable plastic packaging for easy storage.
Butted seam-construction prevents splitting under maximum pressure
Internal barrel serrations grip wires tightly to resist pull-out and reduce electrical resistance
Tin-plated brass construction for corrosion resistance
Shouldered barrel insulation quickly positions terminal for proper crimping
Expanded insulation entry accommodates a wide variety of insulation diameters and provides additional insulation support
Qty:
Part #:539-IT3I-C0
- Cable Tie, 11", 40 lb., UV Black, 100/Bag
Quality Construction
One-piece design for added strength
Superior locking mechanism
Exceeds industry tensile strength ratings
Low Insertion Force
Tapered thin tip reduces initial friction
Lowest insertion force with high tensile strength
Reduces installation fatigue
No Burrs or Sharp Edges
Smooth corners provide added safety
Rounded edges eliminate insulation damage
Stepped Tail Gripper
Tapered tail grip assures positive threading
Stepped tail allows for easier grabbing and tightening once engaged
Angled Tail
Provides quicker initial insertion
Lowers installation costs
One-piece design for added strength
Tapered thin tip reduces initial friction
Tapered tall grip assures positive threading
Qty:
Part #:539-IT3S-C0
- Cable Tie, 11", 50 lb., UV Black, 100/Bag
Agency Compliant
UL Approved, CSA Approved, Mil-Spec Approved, RoHs Compliant Products
Quality Construction
One-piece design for added strength
Superior locking mechanism
Exceeds industry tensile strength ratings
Low Insertion Force
Tapered thin tip reduces initial friction
Lowest insertion force with high tensile strength
Reduces installation fatigue
No Burrs or Sharp Edges
Smooth corners provide added safety
Rounded edges eliminate insulation damage
Stepped Tail Gripper
Tapered tail grip assures positive threading
Stepped tail allows for easier grabbing and tightening once engaged
Angled Tail
Provides quicker initial insertion
Lowers installation costs
UL Listed, CSA Listed, Mil-Spec Approved, RoHs Compliant
Quality construction
Low insertion force
No burrs or sharp edges
Stepped tail gripper
Angled tail
Qty:
Part #:306674
- Cable Tie, 14", 50 lb., UV Black, 100/Bag
Agency Compliant
UL Approved, CSA Approved, Mil-Spec Approved, RoHs Compliant Products
Quality Construction
One-piece design for added strength
Superior locking mechanism
Exceeds industry tensile strength ratings
Low Insertion Force
Tapered thin tip reduces initial friction
Lowest insertion force with high tensile strength
Reduces installation fatigue
No Burrs or Sharp Edges
Smooth corners provide added safety
Rounded edges eliminate insulation damage
Stepped Tail Gripper
Tapered tail grip assures positive threading
Stepped tail allows for easier grabbing and tightening once engaged
Angled Tail
Provides quicker initial insertion
Lowers installation costs
UL Listed, CSA Listed, Mil-Spec Approved, RoHs Compliant
Quality construction
Low insertion force
No burrs or sharp edges
Stepped tail gripper
Angled tail
$
38.35
BAG
Qty:
Part #:539-IT5LH-L
- Cable Tie, 17", 120 lb., Natural, 50/Bag
Quality Construction
One-piece design for added strength
Superior locking mechanism
Exceeds industry tensile strength ratings
Low Insertion Force
Tapered thin tip reduces initial friction
Lowest insertion force with high tensile strength
Reduces installation fatigue
No Burrs or Sharp Edges
Smooth corners provide added safety
Rounded edges eliminate insulation damage
Stepped Tail Gripper
Tapered tail grip assures positive threading
Stepped tail allows for easier grabbing and tightening once engaged
Angled Tail
Provides quicker initial insertion
Lowers installation costs
UL Compliant, CSA Compliant, MIL-Spec Approved, RoHs Compliant
One-piece design for added strength
Tapered thin tip reduces initial friction
Smooth corners provide added safety
Tapered tall grip assures positive threading
Stepped tail allows for easier grabbing
Qty:
Part #:539-IT3SMH-C0
- Cable Tie, Mounting Head, 11", 50 lb., Natural, 100/Bag
UL Listed nylon 6/6 cable ties
Secures and positions wire bundles, cables, hoses, etc. to panels or other surfaces with on fastener to reduce time and cost
Allows bundling before and after mounting
Color
Natural
Screw Size
No. 10
Cable Tie Type
Standard
Cable Tie Length
11.2"
$
0.66
Qty:
Part #:539-IT750MP-C
- Mounting Pad, 3/4", Adhesive, #4 Screw, Natural, 100/Bag
Lead-N-Feature allows easy insertion for hard to reach applications
Four-sided entry slots save time during placement orientation
Smooth radius cradle eliminates possible damage to cable while providing stable support
Low profile is essential in confined spaces
UL Recognized, rubber adhesive fixing device
Slot Height .05"
Slot Width .20"
$
43.10
Qty:
Part #:539-IT1-5I-C
- Cable Tie, 6", 40 lb., Natural, 100/Bag
Quality Construction
One-piece design for added strength
Superior locking mechanism
Exceeds industry tensile strength ratings
Low Insertion Force
Tapered thin tip reduces initial friction
Lowest insertion force with high tensile strength
Reduces installation fatigue
No Burrs or Sharp Edges
Smooth corners provide added safety
Rounded edges eliminate insulation damage
Stepped Tail Gripper
Tapered tail grip assures positive threading
Stepped tail allows for easier grabbing and tightening once engaged
Angled Tail
Provides quicker initial insertion
Lowers installation costs
Qty:
Part #:539-IT3S-CO
- Cable Tie, 11", 50 lb., Natural, 100/Bag
Agency Compliant
UL Approved, CSA Approved, Mil-Spec Approved, RoHs Compliant Products
Quality Construction
More Information
Reviews
#IDEALelectrical
One-piece design for added strength
Superior locking mechanism
Exceeds industry tensile strength ratings
Low Insertion Force
Tapered thin tip reduces initial friction
Lowest insertion force with high tensile strength
Reduces installation fatigue
No Burrs or Sharp Edges
Smooth corners provide added safety
Rounded edges eliminate insulation damage
Stepped Tail Gripper
Tapered tail grip assures positive threading
Stepped tail allows for easier grabbing and tightening once engaged
Angled Tail
Provides quicker initial insertion
Lowers installation costs
UL Listed, CSA Listed, Mil-Spec Approved, RoHs Compliant
Quality construction
Low insertion force
No burrs or sharp edges
Stepped tail gripper
Angled tail
Qty:
Displaying: 1 - 15 of 15 Matching Items