3/4in
HVAC and Plumbing


Displaying: 1 - 12 of 12 Matching Items
12 Items
View:
Active Filters :
Part #:700506

This 3/4 inch steam radiator gate valve is used as a shutoff valve in steam or hydronic heating systems. It feature a bronze body with thread x male union connections. Bronze body Thread x male union connections Rising stem Solid wedge
$210.00 MSRP $ 133.13
Part #:100146

This 3/4 inch bronze automatic reseating temperature and pressure relief valve with a 5 inch thermostat is installed directly in tank tapings and is used in commercial applications to provide automatic temperature and pressure protection for hot water supply tanks and hot water heaters. It features a bronze body with NPT male inlet and NPT female outlet connections, thermo-bonded coated thermostat, tamper resistant bonnet screws, automatic reseating feature, and test lever. The temperature relief is 210 degrees (99 degrees C) and the pressure relief is 150 psi. Product Features Thermo-bonded thermostat Non-mechanical seat to disc alignment Tamper resistant bonnet screws Thermostat is accurate and proven
$516.00 MSRP $ 189.05
Part #:605681

This 3/4 inch lead free temperature and pressure relief valve is designed to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU per hour. This two in one relief valve provides a proven and cost effective means to protect against excessive temperature and pressure emergency conditions. It features a lead free copper alloy body with NPT male inlet and NPT female outlet connections, a unique thermostat with special thermo-bonded coating, and test lever. The temperature relief is 210 degrees F (99 degrees C) and the pressure relief is set at 150 psi (10.3 bar). Product Features ASME rated and CSA listed Extension thermostat with thermo-bonded coating Stainless steel spring Lead free copper alloy body
$49.75 MSRP $ 25.09
Part #:559118

The LFMMVM1 Thermostatic Mixing Valves maintain and limit mixed hot water to a desired, selectable temperature. The LFMMVM1 valves can be set to any temperature between 80&degF and 120&degF with flow rates as low as 0.5 gpm and as high as 12 gpm (refer to capacity chart on back). This mixing valve series is listed under ASSE 1017 for valves used in hot water source applications, ASSE 1069 for single-pipe, tempered water applications and ASSE 1070 for valves used in individual or multiple fixture applications and also listed IAPMO cUPC. The LFMMVM1's feature Lead Free construction to comply with Lead Free installation requirements. The LFMMVM1 uses a double throttling design to control both the hot and cold water supply to the mixed outlet. The superior flow characteristics of this valve provide accurate temperature control (&plusmn3&degF) with low pressure drop across the rated flow range. As an added feature, the LFMMVM1 series incorporates integral inlet filter washers and check valves in both the hot and cold water inlets to protect against cross flow. Features Lead Free cast copper silicon alloy body construction Solid wax hydraulic principle thermostat assures dependable mixing of hot and cold water Thermostat controls both hot and cold water Available union connection models include threaded (-UT), solder (-US), PEX (-PEX), PEX F1960 cold expansion fittings (-CEF), CPVC (-CPVC), Quick-Connect (-QC), or w/press Adjustment cap with locking feature Integral filter washers and check valves
$243.00 MSRP $ 153.94
Part #:130-5419-027

Press Fit Fittings - Coupling - Press x Press - No-Lead - CTS x CTS
$6.86 MSRP $ 4.11
Part #:284-335

TAC335 3/4" Bronze Pressure Reducing Valve With Fast Fill Feature Set @ 12 PSI 10-25 Adj Part Description Pressure Reducing Valve Type Built-In Check Actuation Type Adjustable Screw Nominal Size 3/4 Inch End Connection Female Threaded x Female Threaded End to End Distance 3-3/4 Inch Body Material Brass Standard Factory Setting 12 PSI Temperature Rating 212 Deg F Pressure Rating 100 PSI Exclusions Exclusive Fast Fill Lever Lock Application Boiler Applicable Standard ASSE 1012, CSA B64.3 -11 Pressure Setting Rating 10 to 25 PSI
$ 135.18
 
Displaying: 1 - 12 of 12 Matching Items