LPS
Lubricants and Paints
View:
Active Filters :
- Main Category: Lubricants and Paints
- Brand: LPS
Part #:505926
- LPS 2® Heavy-Duty Lubricant
The strong, oily film multi-purpose lubricant, and penetrant with added corrosion protection
FEATURES
Strong, multi-purpose lubricant and penetrant with added corrosion protection
Provides a non-drying, light, oily film
Reduces wear caused by friction and corrosion
Loosens rusted or frozen parts
Provides superior corrosion protection of metal parts during shipment
Protects metal parts during indoor storage up to one year
Does not contain silicone
Displaces moisture
Safe to use on most plastics, rubbers and paint
APPLICATIONS
Bearings & valves
Cables & linkages
Hand tools
Add Dies, bits & fasteners
Slides & tracks
Productions & transportation equipment
Metal parts in storage
Pulleys & rollers
Engines & electric motors
SPECIFICATIONS
Caterpillar 1E4970
Ford Motor Co.
MIL-PRF-16173E Grade 3 Class 1 (except 3.5, 3.6)
NSF International, H2 (Aerosol)
NSF International, H2 (Bulk)
$
16.24
Qty:
Part #:503463
- THIS CAN ONLY BE SOLD TO MANUFACTURER CUSTOMERS DUE TO VOC REGULATION
PreSolve® Orange Degreaser
The orange degreaser that solves the toughest cleaning problems
FEATURES
High performance industrial degreaser that works on contact
Ideal for removing grease, tars, and oils
Fast acting, deep penetration
Controlled evaporation
Flash point above 100°F (38°C)
Low residue
Safe on all metals and most plastics
APPLICATIONS
Air Compressors
Alternators
Bearings
Chains & Cable Connections
Cranes
Engines
Fork Lifts
Gears
Heavy Equipment
Power and Air Tools
Printing Presses
Pulleys
SPECIFICATIONS
NSF International, C1 (Aerosol)
Pratt & Whitney Canada MMC 21530
NSF International,C1- Non-Aerosol
Qty:
Part #:520696
- Instant Super Degreaser 2.0
An industrial- strength degreaser with no brominated solvents, trichlorethylene or perchloroethylene for an improved health and safety profile
FEATURES
Non-flammable &ndash can be used on or near energized equipment. This improves safety and reduces downtime associated with de-energizing equipment.
Non-brominated &ndash improved health and safety profile for increased worker safety and simplified employer compliance.
Fast Evaporation &ndash quickens clean-up time. Improves productivity and reduces downtime
No Rinsing/No Residue &ndash no wiping or rinsing prior to next production step, reduces time and labor.
Heavy-duty Performance &ndash removes oil, grease, dirt, and tar with less cleaner, saving money.
Non-conductive &ndash can be used on or near energized equipment, eliminating equipment downtime.
Power Blast Spray &ndash blasts away dirt, oil, and other residues for quicker cleaning (increased productivity).
APPLICATIONS
Air Compressors
Bearings
Cables
Chains
Forklifts
Gears
Heavy Equipment
Power Tools
SPECIFICATIONS
NSF International, K1 (Aerosol)
NSF International, K1 (Bulk)
Qty:
Part #:502693
- Tapmatic® #1 Gold Cutting Fluid
Tapmatic #1 Gold Cutting Fluidis great for all metals, including aluminum.
FEATURES
Does not contain water, solvents, or inactive fillers
Reduces cutting torque and improves cutting efficiency
Does not contain chlorinated solvents or chlorinated paraffins
Requires less product usage than traditional cutting fluids
Increases tool life and improves surface finish
Great for all metals including aluminum
Excellent for tapping applications
APPLICATIONS
Boring
Broaching
Drawing
Drilling
Engraving
Reaming
Threading
Turning
Sawing
Facing
Milling
Qty:
Part #:505931
- LPS 3® Premier Rust Inhibitor
The long-term, waxy film, premier rust inhibitor protects even in the harshest environment
FEATURES
Protects for up to 2 years indoors
Prevents rust and corrosion
Safe on all metals
Safe to use on rubber, fabric, plastics, and paints
Inhibits exfoliation and filiform corrosion of aluminum
Safe on all metals
Penetrates to displace moisture
APPLICATIONS
Aircraft fuselages
Battery terminals
Cables, chains, and pulleys
Cargo sections
Interior sections of vehicle doors
Metal parts
Pumps and hose assemblies
SPECIFICATIONS
AirbusAIMS 09-08-001
BMS 3-23G Type II Class I
Caterpillar 1E4967
MIL-PRF-16173E Grade 2 Class 1 - except for para. 4.6.4
NSF International, H2 (Aerosol)
NSF International, H2 (Bulk)
Qty:
closeout
Part #:520993
- CLOSEOUTS Only 46 Left!
- HDX Heavy-Duty Degreaser
Fast-acting, non-flammable, heavy-duty solvent for degreasing all metal parts, equipment, and surfaces.
FEATURES
Removes oil, grease, wax, dirt, moisture, tar and other contaminants
Non-flammable
Fast evaporating
Quick penetration
Non-conductive
No rinsing
No residue
APPLICATIONS
Air Compressors
Air Conditioning Compressors
Appliances
Bearings
Cables
Chains
Clutches
Coils
Controls
Conveyors
Engines
Forklifts
Gauges
Gear Drives
Gears
Handtrucks
Heavy Equipment
Pneumatic Hand Tools
Pulleys
Springs
Starters
Welding Instruments
SPECIFICATIONS
NSF International, K1 (Aerosol)
NSF International, K1 (Non Aerosol)
$
13.94
Qty:
Part #:505911
- LPS 3® Premier Rust Inhibitor
The long-term, waxy film, premier rust inhibitor protects even in the harshest environment
FEATURES
Protects for up to 2 years indoors
Prevents rust and corrosion
Safe on all metals
Safe to use on rubber, fabric, plastics, and paints
Inhibits exfoliation and filiform corrosion of aluminum
Safe on all metals
Penetrates to displace moisture
APPLICATIONS
Aircraft fuselages
Battery terminals
Cables, chains, and pulleys
Cargo sections
Interior sections of vehicle doors
Metal parts
Pumps and hose assemblies
SPECIFICATIONS
AirbusAIMS 09-08-001
BMS 3-23G Type II Class I
Caterpillar 1E4967
MIL-PRF-16173E Grade 2 Class 1 - except for para. 4.6.4
NSF International, H2 (Aerosol)
NSF International, H2 (Bulk)
Qty:
Part #:522465
- Red & Redi Multi-Purpose Red Grease
The highly visible, multi-purpose gear grease that reduces friction and vibration in extreme temperature and pressure applications while providing protection from corrosion and oxidation.
FEATURES
Reduces friction and vibration at extreme pressures and temperatures
Red color is highly visible during and after lubrication
Prevents rust, corrosion, and oxidation
Water resistant formula prevents water washout
Resists shock
Non-melting
NLGI Grade 2
APPLICATIONS
Automotive
Aviation
Cables
Cams and Pistons
Chains
Guide Rails
Latches
Marine
Open Gears
Overhead Door Tracks
Packaging
Slide Conveyors
Qty:
closeout
$
82.88
Qty:
Part #:505917
- LPS 1® Greaseless Lubricant
The greaseless lubricant that penetrates quickly, displaces moisture, and will not attract dust or dirt
FEATURES
Provides a dry, thin, lubricating film
Resists oil, dust, and dirt build-up
Ideal for delicate mechanisms
Removes carbon build-up from surfaces
Displaces moisture
Safe on paint, fabric, and most plastics
Used world-wide in aviation
Loosens rusted or frozen parts
VOC compliant in all 50 states
APPLICATIONS
Cables
Circuit Breakers
Electric Motors
Electronic Connectors
Molds
Nuts and Bolts
Locks
Power Tools
Hinges
Sliding Mechanisms
Ignition Systems
Switch Gears
Relays
SPECIFICATIONS
Bombardier (Canadair)
Ford Motor Co.
NSF International, H2 (Aerosol)
NSF International, H2 (Bulk)
Qty:
Part #:505913
- Cold Galvanize Corrosion Inhibitor
A 99% zinc-rich coating that prevents corrosion and rust on all metal surfaces for up to three years
FEATURES
Zinc-rich galvanized coating &ndash Zinc Purity 99+%
Works like hot-dip galvanizing on ferrous metals indoors and out
Withstands water temperature up to 212°F (100°C) and continuous dry heat up to 750°F (400°C)
Commonly used as a flash rust preventive on welded areas
Inhibits rust on steel under severe environments
Provides a tough, flexible coating that will not yellow, chalk, crack, or peel
Galvanic action electrochemically protects bare metal
Dries in 3-5 minutes
Can be used as a paint primer
Protects underwater
Acceptable for use in Canadian Food Processing Establishments
APPLICATIONS
Air Conditioning Parts
Antennas
Bridges
Chain Link Fences
Docks
Ducts
Heating Parts
Machine Housing
Tanks
Material Handling Equipment
Newly Welded Surfaces
Off-shore Rigs
Outside Storage Tanks
Pipes
Plumbing
Pulley and Chain Cover
Structural Steel
Transmission Toners
$
18.12
Qty:
Part #:500965
- Electro 140° Contact Cleaner
The high flash point contact cleaner with superior penetrating action for cleaning precision parts
FEATURES
Superior Wetting and Penetrating Action
Controlled Evaporation
Flash Point 140°F (60°C)
Non-Conductive and Leaves no Residue
Safe to use on most surfaces
Inverta Spray Valve
APPLICATIONS
Coin Counters & Chutes
Connectors
Contacts
Fluid Systems
Office Equipment
Relays and Controls
Semiconductor Assemblies
Switches
Telephone Equipment
Printed Circuits
SPECIFICATIONS
Ford Motor Co.
Qty:
Part #:505932
- Heavy-Duty Silicone Lubricant
The silicone-rich, water-based formula that protects rubber and plastic parts.
FEATURES
Water-based, silicone rich formula that lubricates and protects rubber, plastic and metal parts
Does not contain chlorinated solvents
Provides excellent lubricity
Ideal for surfaces like elastomers and plastics where petroleum based lubricants are unsuitable
Eliminates sticking, binding, squeaking
Forms a clear, dry film upon extended drying
Colorless and odorless
APPLICATIONS
Cables
Castors
Moving Plastic Parts
O-Rings
Plastic Gears
Plastic Rollers
Rubber Bushings
Rubber Mountings
Seals
Sprockets
Valves
SPECIFICATIONS
NSF International, H1 (Aerosol)
NSF International, H1 (Bulk)
Qty:
Part #:505826
- LPS 2® Heavy-Duty Lubricant
The strong, oily film multi-purpose lubricant, and penetrant with added corrosion protection
FEATURES
Strong, multi-purpose lubricant and penetrant with added corrosion protection
Provides a non-drying, light, oily film
Reduces wear caused by friction and corrosion
Loosens rusted or frozen parts
Provides superior corrosion protection of metal parts during shipment
Protects metal parts during indoor storage up to one year
Does not contain silicone
Displaces moisture
Safe to use on most plastics, rubbers and paint
APPLICATIONS
Bearings & valves
Cables & linkages
Hand tools
Add Dies, bits & fasteners
Slides & tracks
Productions & transportation equipment
Metal parts in storage
Pulleys & rollers
Engines & electric motors
SPECIFICATIONS
Caterpillar 1E4970
Ford Motor Co.
MIL-PRF-16173E Grade 3 Class 1 (except 3.5, 3.6)
NSF International, H2 (Aerosol)
NSF International, H2 (Bulk)
Qty:
Part #:507461
- Plastic Safe Electrical Cleaner
Plastic Safe Electrical Cleaner is the non-flammable, fast-evaporating cleaner that is safe on plastics and does not contain HCFCs.
FEATURES
Safe on plastics
Fast Evaporating formula that leaves no residue
Non-Flammable
Formulated for contact cleaning
NSF Certified K2 Registration #167855
VOC Compliant in all 50 states
APPLICATIONS
Connectors
Electrical Contacts
Magnetic Heads
Office Equipment
Printed Circuit Boards
Printers
Relays
Solenoids
SPECIFICATIONS
NSF International, K2
Qty:
Part #:511465
- F-104° Solvent Degreaser
The moderate-evaporating, heavy-duty degreaser that removes grease and oil in seconds
FEATURES
Heavy-duty degreaser removes grease and oil
Safe to use on all metals and most surfaces
Controlled evaporation
No rinsing and low residue
Alternative to MEK and chlorinated solvents
104°F (40°C) flash point
Inverta Spray Valve allows one to spray in an upright or inverted position
APPLICATIONS
Aircraft Structures
Chains
Gears
Cables
Cranes
Cowlings
Forklifts
Air Compressor
Bonding Prep
Power Tools
Landing Gear
Terminals
Qty:
Part #:504924
- CFC Free NU Contact Cleaner
CFC Free NU Contact Cleaner removes dirt, moisture, dust, flux, or oxides from the internal components of electronic or precision equipment such as circuit boards.
FEATURES
Contains NO Chlorinated solvents
Fast Drying, No Residue
Penetrating action removes dirt, flux, moisture, dust, oxides, and other contaminants
Safe on plastics
Conforms to VOC regulations of CARB, OTC, and LADCO
APPLICATIONS
Connectors
Contacts
Magnetic Tap Heads
Printed Circuits
Office Equipment
Semiconductor Assemblies
Switches
Telecommunication Equipment
Telephone Equipment
SPECIFICATIONS
Boeing D6-17487, Revision T
NSF International, K2
Qty:
Part #:506600
- TKX® All-Purpose Lubricant
FEATURES
Excellent multi-purpose lubricant
Loosens rusted or frozen parts
Displaces moisture
Protects against corrosion
Provides a non-drying, long lasting, oily film
High flash point of >160°F (71°C)
Non-conductive
Does not contain chlorinated solvents or silicones
APPLICATIONS
Bearings
Cables & chains
Castings
Dies & molds
Metal parts & machinery
Forgings
Gears
Nuts & bolts
Pumps & pulleys
Springs
Saw blades
Ways & guides
Rollers & sliding mechanisms
Machined stock
SPECIFICATIONS
NSF International, H2 (Aerosol)
NSF International, H2 (Bulk)
Qty:
Part #:841-428-00155
- LPS 1® Greaseless Lubricant
The greaseless lubricant that penetrates quickly, displaces moisture, and will not attract dust or dirt
FEATURES
Provides a dry, thin, lubricating film
Resists oil, dust, and dirt build-up
Ideal for delicate mechanisms
Removes carbon build-up from surfaces
Displaces moisture
Safe on paint, fabric, and most plastics
Used world-wide in aviation
Loosens rusted or frozen parts
VOC compliant in all 50 states
APPLICATIONS
Cables
Circuit Breakers
Electric Motors
Electronic Connectors
Molds
Nuts and Bolts
Locks
Power Tools
Hinges
Sliding Mechanisms
Ignition Systems
Switch Gears
Relays
SPECIFICATIONS
Bombardier (Canadair)
Ford Motor Co.
NSF International, H2 (Aerosol)
NSF International, H2 (Bulk)
Qty:
Displaying: 1 - 19 of 19 Matching Items