PTFE Packing
Pumps


Displaying: 1 - 24 of 319 Matching Items
319 Items
View:
Active Filters :
Part #:504747

A 100% pure PTFE joint sealant used in virtually any gasketing applications. Adhesive backing allows for easy installation and material is soft and flexible so it handles curves and contours. Installation takes only minutes and removal of the sealant is simple and involves no scraping or grinding. It is sold in continuous lengths so that it can be cut off in various lengths.
$89.27 MSRP $72.80 RL
RL
Part #:801552

A 100% pure PTFE joint sealant used in virtually any gasketing applications. Adhesive backing allows for easy installation and material is soft and flexible so it handles curves and contours. Installation takes only minutes and removal of the sealant is simple and involves no scraping or grinding. It is sold in continuous lengths so that it can be cut off in various lengths.
$143.10 RL
RL
Part #:800292

A 100% pure PTFE joint sealant used in virtually any gasketing applications. Adhesive backing allows for easy installation and material is soft and flexible so it handles curves and contours. Installation takes only minutes and removal of the sealant is simple and involves no scraping or grinding. It is sold in continuous lengths so that it can be cut off in various lengths.
$83.00 MSRP $62.10 RL
RL
Part #:800552

A 100% pure PTFE joint sealant used in virtually any gasketing applications. Adhesive backing allows for easy installation and material is soft and flexible so it handles curves and contours. Installation takes only minutes and removal of the sealant is simple and involves no scraping or grinding. It is sold in continuous lengths so that it can be cut off in various lengths.
$140.00 MSRP $105.30 RL
RL
Part #:801544

Unlike other PTFE fluorocarbon filament packing, SEPCO prelubricates the fibers of the ML2235 to provide a softer, more flexible packing, with improved peripheral speed characteristics and exothermic properties. No glazing at higher speed applications, inert, lower coefficient of friction, thermal resistance to 500F/260C and high compressive strength.
$160.20 MSRP $127.40 LBS
LBS
Part #:805892

The SEPCO ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high temperature lubricant is added. The ML2225 is a great general service on rotary and reciprocating pumps, and agitators. Yarns are coated in PTFE suspensoid.This system of impregnation assures even distribution of the PTFE particles, protecting the fibers from chemical action.
$72.03 MSRP $58.10 LBS
LBS
Part #:805053

The SEPCO ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high temperature lubricant is added. The ML2225 is a great general service on rotary and reciprocating pumps, and agitators. Yarns are coated in PTFE suspensoid.This system of impregnation assures even distribution of the PTFE particles, protecting the fibers from chemical action.
$72.03 MSRP $58.10 LBS
LBS
Part #:801891

The SEPCO ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high temperature lubricant is added. The ML2225 is a great general service on rotary and reciprocating pumps, and agitators. Yarns are coated in PTFE suspensoid.This system of impregnation assures even distribution of the PTFE particles, protecting the fibers from chemical action.
$72.03 MSRP $58.10 LBS
LBS
Part #:800290

A 100% pure PTFE joint sealant used in virtually any gasketing applications. Adhesive backing allows for easy installation and material is soft and flexible so it handles curves and contours. Installation takes only minutes and removal of the sealant is simple and involves no scraping or grinding. It is sold in continuous lengths so that it can be cut off in various lengths.
$78.57 MSRP $62.00 RL
RL
Part #:805087

The SEPCO ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high temperature lubricant is added. The ML2225 is a great general service on rotary and reciprocating pumps, and agitators. Yarns are coated in PTFE suspensoid.This system of impregnation assures even distribution of the PTFE particles, protecting the fibers from chemical action.
$81.24 MSRP $60.93 LBS
LBS
Part #:801543

Unlike other PTFE fluorocarbon filament packing, SEPCO prelubricates the fibers of the ML2235 to provide a softer, more flexible packing, with improved peripheral speed characteristics and exothermic properties. No glazing at higher speed applications, inert, lower coefficient of friction, thermal resistance to 500F/260C and high compressive strength.
$162.99 MSRP $122.24 LBS
LBS
Part #:801826

Unlike other PTFE fluorocarbon filament packing, SEPCO prelubricates the fibers of the ML2235 to provide a softer, more flexible packing, with improved peripheral speed characteristics and exothermic properties. No glazing at higher speed applications, inert, lower coefficient of friction, thermal resistance to 500F/260C and high compressive strength.
$208.71 MSRP $156.53 LBS
LBS
Part #:802802

Unlike other PTFE fluorocarbon filament packing, SEPCO prelubricates the fibers of the ML2235 to provide a softer, more flexible packing, with improved peripheral speed characteristics and exothermic properties. No glazing at higher speed applications, inert, lower coefficient of friction, thermal resistance to 500F/260C and high compressive strength.
$107.54 MSRP $80.66 LBS
LBS
Part #:805054

The SEPCO ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high temperature lubricant is added. The ML2225 is a great general service on rotary and reciprocating pumps, and agitators. Yarns are coated in PTFE suspensoid.This system of impregnation assures even distribution of the PTFE particles, protecting the fibers from chemical action.
$72.03 MSRP $58.10 LBS
LBS
Part #:805091

The SEPCO ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high temperature lubricant is added. The ML2225 is a great general service on rotary and reciprocating pumps, and agitators. Yarns are coated in PTFE suspensoid.This system of impregnation assures even distribution of the PTFE particles, protecting the fibers from chemical action.
$72.03 MSRP $58.10 LBS
LBS
Part #:805001

Unlike other PTFE fluorocarbon filament packing, SEPCO prelubricates the fibers of the ML2235 to provide a softer, more flexible packing, with improved peripheral speed characteristics and exothermic properties. No glazing at higher speed applications, inert, lower coefficient of friction, thermal resistance to 500F/260C and high compressive strength.
$160.20 MSRP $120.15
LBS
Part #:805080

Unlike other PTFE fluorocarbon filament packing, SEPCO prelubricates the fibers of the ML2235 to provide a softer, more flexible packing, with improved peripheral speed characteristics and exothermic properties. No glazing at higher speed applications, inert, lower coefficient of friction, thermal resistance to 500F/260C and high compressive strength.
$160.20 MSRP $120.15 LBS
LBS
Part #:800174

ML4002 is engineered with finely ground particles of the highest quality graphite in a PTFE matrix to control graphite migration. SEPCO ML4002 is 100% GFO fibers with the W. L. Gore seal of approval. This Comp packing is an excellent, all around packing exhibiting good thermal conductivity characteristics resulting in higher shaft speed, feet-per-minute (fpm) ratings.
$153.09 MSRP $114.82 LBS
LBS
Part #:800546

Multi-Lok braided high-purity carbon fibers made from a PAN base, with a minimum carbon content of 95.0%. (Staple fibers from PAN produce a more flexible packing than filament fibers, which tends to fracture when bent. Each individual strand is coated with pure PTFE and cured before braiding. During the braiding process, pure PTFE is applied throughout the body of the packing. The packing is lubricated under hydraulic pressure with a proprietary nonpetroleum lubricant, containing no sulfur, silicone, or waxes.
$269.69 MSRP $202.27 LBS
LBS
Part #:805090

The SEPCO ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high temperature lubricant is added. The ML2225 is a great general service on rotary and reciprocating pumps, and agitators. Yarns are coated in PTFE suspensoid.This system of impregnation assures even distribution of the PTFE particles, protecting the fibers from chemical action.
$75.32 MSRP $58.10 LBS
LBS
Part #:805077

Unlike other PTFE fluorocarbon filament packing, SEPCO prelubricates the fibers of the ML2235 to provide a softer, more flexible packing, with improved peripheral speed characteristics and exothermic properties. No glazing at higher speed applications, inert, lower coefficient of friction, thermal resistance to 500F/260C and high compressive strength.
$160.20 MSRP $120.15 LBS
LBS
Part #:800260

ML4002 is engineered with finely ground particles of the highest quality graphite in a PTFE matrix to control graphite migration. SEPCO ML4002 is 100% GFO fibers with the W. L. Gore seal of approval. This Comp packing is an excellent, all around packing exhibiting good thermal conductivity characteristics resulting in higher shaft speed, feet-per-minute (fpm) ratings.
$158.86 MSRP $119.14 LBS
LBS
Part #:800545

Multi-Lok braided high-purity carbon fibers made from a PAN base, with a minimum carbon content of 95.0%. (Staple fibers from PAN produce a more flexible packing than filament fibers, which tends to fracture when bent. Each individual strand is coated with pure PTFE and cured before braiding. During the braiding process, pure PTFE is applied throughout the body of the packing. The packing is lubricated under hydraulic pressure with a proprietary nonpetroleum lubricant, containing no sulfur, silicone, or waxes.
$277.25 MSRP $207.94 LBS
LBS
Part #:801844

The SEPCO ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high temperature lubricant is added. The ML2225 is a great general service on rotary and reciprocating pumps, and agitators. Yarns are coated in PTFE suspensoid.This system of impregnation assures even distribution of the PTFE particles, protecting the fibers from chemical action.
$72.03 MSRP $54.02 LBS
LBS
 
Displaying: 1 - 24 of 319 Matching Items