Large
Safety and Welding Products
View:
Active Filters :
- Main Category: Safety and Welding Products
- Alt. Size: Large
Part #:503802
-
PIP® Superior Grade Split Cowhide Leather Welder's Glove with Cotton/Foam Lining and DuPont&trade Kevlar® Stitching
Side Split Cowhide leather construction provides comfort, durability, excellent abrasion resistance, and breathability
Side Split leather is durable and provides excellent protection due to its dense fibers
Fully welted to protect seams from abrasions
Stitched with Kevlar® adding strength and burn resistance
Cotton/foam lining gives welders additional heat protection but still absorbs moisture
One-piece back for extended glove life
Wing thumb increases comfort in open-handed work
Double reinforced palm and thumb strap increases durability and provides added protection at common wear points
Part #:504775
- The KAMORI&trade RWG52 Cut Protection Work Glove by Radians has an ANSI Cut rating of A4 and an EN388 cut rating of 5. The white grain goat skin glove with an Aramid lining provides excellent cut protection.
White grain goat skin driver with Aramid lining
Slip-on cuff design and keystone thumb provide a comfortable fit.
Load weight of 1851g
Tested to EN 388 standards for Abrasion Resistance, Blade Cut, Tear, and Puncture (3 5 2 3).
ANSI Cut Level A4, EN388 Cut Level 5.
Qty:
Part #:512251
-
Radians SJ11QB Class 3 weather proof Bomber Jacket with a quilted liner makes it very easy to slip on and off over other fleece or other warm outwear.
Quilted Liner 160g/m2
Color blocked bottom
2" silver reflective tape
PU coated weather proof 300D oxford polyester shell
Concealed attached hood
Elastic waistband and cuffs
Zippered, lined slash pockets
3D flap covered cell phone / radio chest pocket
Two lower zipper closure lined pockets
One inside open chest pocket
Mic tabs on both shoulders.
Qty:
Part #:512262
Qty:
Part #:512740
- Powder-Free Latex Gloves, Large, Natural, 4 4/5 mil, 1000/Carton
Eliminates potential aerosolization of glove powder and powder associated transfer of chemical allergens
Perfect combination of protection and sensitivity.
Enhanced strength and durability.
Quick and easy to don.
Improved tactile sensitivity with increased gripping characteristics
Part #:516622
- North Polar Insulated Leather Palm - 70/6465NK
High performance protection in cold weather. Thinsulate® liner provides excellent thermal protection, from temperatures down to -36° F (-38° C). Waterproof vinyl liner helps to prevent hands from getting wet. Gunn cut and wing thumb construction for wearer comfort.
Specifications
Construction
Gunn cut, wing thumb
Gauge / mil
NA
Glove Type
Thermal glove
Material
Split leather and cotton canvas
Material Color
Blue and yellow
Recommended for temperatures down to -36°F (-38°C)
Part #:512240
-
Radians SJ01B-3 Type R, Class 3, Long Sleeve Hooded Sweatshirt with zipper closure offers superior warmth while keeping you visible. Color blocking at the bottom conceals dirt.
Black elastic knit waistband and cuffs.
Low Piling Polyester fleece material.
Color blocking at the bottom.
2&rdquo silver reflective tape.
Full front zipper closure.
Two lower pouch pockets.
Hood with adjustable pull cords.
Custom imprinting available on left chest and back center.
25 Wash Max.
Meets ANSI/ISEA 107-2015 Standards.
Qty:
Part #:512473
-
The Radians RWG22 Hi-Viz work glove provides excellent protection from abrasion. The seamless design of the 13 gauge, polyester shell with the polyurethane dipped palm provides protection in wet or dry conditions and a comfortable fit in hazardous applications.
Applications Construction, Assembly, Automotive, General Purpose, Manufacturing, Shipping, Warehousing
Qty:
closeout
$17.67 MSRP
$
11.88
Part #:512500
- CLOSEOUTS Only 1 Left!
- The RWG603 Cut Protection Sandy Foam Nitrile Coated Glove by Radians has an ANSI Cut rating of A5 and an EN388 cut rating of 5. The high visibility red sandy foam nitrile palm coating provides a strong grip in both wet and dry applications. The dense TPR overlays on the back of the hand provide added impact protection. This 13 gauge high performance glove is ideal for applications that need both cut and abrasion resistance along with the ability to grip objects.
Applications Petrochem Industry, Automotive, Construction, Manufacturing, Material Handling
Qty:
Part #:517554
- The Radians RWG605 cold weather glove provides EN388 level 5 protection and ANSI level 4 protection against cuts. The RWG605 features a 13 gauge knitted HPPE outer shell with a smooth blue latex coating and a 7 gauge Acrylic inner shell to provide extra protection and comfort. The palm has a black foam latex coating that provides excellent protection from abrasion in wet or dry, cold weather conditions.
Applications Cold Storage, Manufacturing, Frozen Food Processing, General Outdoor Activities
$
30.87
Qty:
$
30.65
Qty:
Part #:506861
Part #:512230
-
Radians ST11 Class 2 Hi-Viz T-Shirt with Max-Dri&trade Moisture Wicking Mesh.
This safety T-Shirt is made with an arid Birdseye Mesh allowing for maximum breathability, without compromising durability. The stripes are adhered by heat transfer rather than sewn on, making the safety T-shirt wear much more like a regular T-shirt. The wicking properties improve hot weather comfort making it feel much cooler. The front pocket does not include reflective material to allow for corporate imprints.
Qty:
Part #:800047
- The Ultimate General Purpose Rain Jacket
Highly visible, flame resistant, and loaded with special features, the Comfort-Brite is lightweight, durable, and affordable.
Ideal Applications Utilities, Telecommunications, Construction, Transportation, DOT&rsquos, Municipalities, Waste Management and General Industry.
Chemical Resistance Many acids, oils, alcohols, salts, and alkalies. ANSI/ISEA 107 Type R Class 3 compliant jacket for high visibility. Loaded with special features for multipurpose applications. Fluorescent background material for excellent daytime visibility. 2 inch silver reflective tape reflects light for 360° nighttime conspicuity. Full cut shoulder with 90° sleeve to body angle for maximum freedom of movement. Therm-O-Rad sealed seams for 100% waterproof protection. Zipper/storm fly front seals out wind, rain, and contaminants. Non-conductive hardware. Roll-a-way hood in collar design for added convenience. Full-vented cape back for improved air circulation. D-ring access for fall protection harness. Easy access cargo pockets with closure. Hook & loop take-up straps on sleeve cuffs for adjustable fit. Mildew resistant. Flame resistant tested. Self extinguishing with flameout and afterglow less than or equal to 2 seconds after removal of ignition source and char length less than 6 inches. (Test method ASTM D6413.)
Qty:
Part #:800085
- With its reinforced heel and toe, these work overshoes are designed to stand up to tough daily wear. That's why they are considered the industry standard..Ideal Applications Food Processing, Transportation, Utilities, Construction, General Industry, Municipalities, and Agriculture. Chemical Resistance Acids, alcohols, bases and diluted water solutions of most chemicals that are water soluble. Not recommended for constant contact with petroleum and oil based products. 10 inch height. Injection molded, seamless construction for 100% waterproof protection. Excellent tensile strength, ease of stretch and tear resistance for more durability, better comfort and easier on and off. Will not crack or stiffen in the coldest of weather. Deep cleated outsole spits out debris for good slip resistance and longer wear. Heavy duty heel kick off cleat for easy no hands removal. Sturdy molded in rubber button for secure closure. No hardware to conduct, tear, snag, or corrode. No lining for easy cleaning and decontamination. More material in heel, toe, and sole for longer wear. Less material in the upper results in lighter weight and reduced leg fatigue.
Qty:
Part #:800803
- Lightweight and affordable
Designed for 100% waterproof protection, our economy line of rainsuits is generously cut for ease of movement and comfort. With features such as electronically welded seams, easy access cargo pockets, vented cape back, snaps for adjustable fit, and heavy duty zipper, they are great for work or play. These imported suits are made to meet Tingley's high standard for quality. Ideal Applications General purpose, light duty. 2-piece suit includes hooded jacket and pants. .25mm double ply PVC. Lightweight and affordable. Zipper front jacket closure with outside storm flap to seal out wind and rain. Attached hood with drawcord. Snap fly front pants. All seams are electronically welded for 100% waterproof protection. Jacket has two easy access cargo pockets with flaps. Vented cape back and underarm vents circulate air for added comfort. Elastic waist pants with snap fly front. Take up snaps on sleeve and leg cuffs for adjustable fit.
Qty:
Qty:
$
36.15
Qty:
Part #:554937
- MCR Safety Mustang Leather Welding Work Gloves Premium Top Grain Cowskin Leather 4.5 Inch Split Leather Gauntlet Cuff
Only the finest top grain leather go into our MIG/TIG welding options. Sewn with DuPont&trade Kevlar® thread to resist sparks and sharp metals which can unravel most gloves, you will find these gloves a great long-term value. Low heat welding often requires optimal dexterity which affords great attention to detail. You'll find features on the 4950 include Premium grade cream grain cow leather, 4.5 Inch russet split gauntlet cuff and wing thumb. If you are looking for the best leather welding gloves, look no further than MCR Safety!
Part #:519625
-
Ultra-Thin Nitrile Coated, Gray
13 Gauge Nylon Knit
Import
Displaying: 1 - 24 of 27 Matching Items