Shop by Category
New

Armstrong 1010 1/2in SW #38 Orifice 150lb Stainless Steel, Inverted Bucket Trap, Bottom Inlet - Top Outlet D525825

Part # : 501-D525825
 
image description Availability: Will be backordered (Typically arrives in 14 days)
MSRP $422.00 $ 324.35

Product Description

Inverted Bucket Steam Traps

Energy efficient because it's so reliable

The inverted bucket is the most reliable steam trap operating principle known. The heart of its simple design is a unique leverage system that multiplies the force provided by the bucket to open the valve against pressure.

Since the bucket is open at the bottom, it resists damage from water hammer, and wear points are heavily reinforced for long life. The inverted bucket has only two moving parts-the valve lever assembly and the bucket. That means no fixed points, no complicated linkage. Nothing to stick, bind or clog.

Conserves energy even in the presence of wear
Armstrong inverted bucket steam traps open and close based on the difference in density between condensate and steam-the inverted bucket principle. They open and close gently, minimizing wear. This simple fact means that inverted buckets are subject to less wear than some other types of traps.

In fact, as an Armstrong inverted bucket trap wears, its tight seal actually improves. The valve and seat of the Armstrong trap provide essentially line contact-resulting in a tight seal because the entire closing force is concentrated on one narrow seating ring.

An Armstrong inverted bucket steam trap continues to operate efficiently with use. Gradual wear slightly increases the diameter of the seat and alters the shape and diameter of the valve. But, as this occurs, a tight seal is still preserved-the ball merely seats itself more deeply.

Corrosion-resistant parts
The stainless steel valve and seat of the Armstrong inverted bucket steam trap are individually ground and lapped together in matched sets. All other working parts are wear- and corrosion-resistant stainless steel.

Venting of air and CO2
The Armstrong inverted bucket provides continuous automatic air and CO2 venting with no cooling lag or threat of air binding.

Operation against back pressure
The Armstrong inverted bucket has excellent performance against back pressure. It has no adverse effect on inverted bucket operation other than to reduce its capacity by the low differential. The bucket simply requires less force to pull the valve open and cycle the trap.

Freedom from dirt problems
Armstrong designed its inverted bucket to be virtually free of dirt problems. The valve and seat are at the top of the trap, far away from the larger particles of dirt, which fall to the bottom. Here, the up-and-down action of the bucket pulverizes them.

Since the valve of an inverted bucket is either fully closed or open, dirt particles pass freely. And the swift flow of condensate from under the bucket's edge creates a unique self-scrubbing action that sweeps dirt out of the trap.


Product Specifications

  • Main Category: Steam and Filter Products
  • Brand: Armstrong
  • Brand: Armstrong International
  • Size: 1/2in
  • Weight (lbs): 1.25
  • Material: Stainless Steel
  • Finish: Stainless Steel
  • Steam Traps: Inverted Bucket Traps
  • Orifice Size: #38
  • End Connection: Socket Weld
  • Maximum Operating Pressure (psi): 150psi
  • Series: 1000
  • Model: 1010
  • Part Number: D525825
  • Alt. Size: 1/2"

Applications/Usage & Features

1000 Series Inverted Bucket Steam Traps

All Stainless Steel for Vertical Installation

For pressures to 650 psig (45 barg)
Capacities to 4,400 lb/hr (2,000 kg/hr)

Armstrong 1000 Series stainless steel inverted bucket steam traps normally last three to four times longer than conventional traps used in identical services. Heat-treated stainless steel valves and seats are of the same design, material and workmanship as those used in traps for pressures up to 900 psig/62 bar and temperatures up to 900˚F/482°C. More compact than cast iron or carbon steel equivalents, 1000 Series traps are ideal for trapping applications such as tracer lines, steam mains and heating/process applications.

The 1000 Series are guaranteed for five years.

Product Reviews