Shop by Category
New

Armstrong WMT1 3/8in NPT Stainless Steel, Thermostatic Wafer Trap, Inline Connection D541398

Part # : 501-D541398
 
image description Availability: Will be backordered (Typically arrives in 14 days)
MSRP $320.00 $ 252.97

Product Description

Thermostatic Wafer Steam Traps

Armstrong offers several thermostatic wafer steam traps. The WT-1 is ideal for low-capacity steam tracers and features an exclusive non-welded wafer design, a sealed stainless steel body and an internal strainer screen two to three times larger than that of other thermostatic traps. Choose from NPT or BSPT screwed connections.

The WT-2000 is adaptable to a 360° connector to expand piping options and simplify installation. Choose NPT or BSPT screwed or socketweld connections. The WT-2000 is also available for use on the IS-2 stainless steel connector with integral strainer. It can also be used with the TVS 4000.

Armstrong’s WT-3 is a carbon steel thermostatic wafer trap for superheated drip service. It features an exclusive non-welded wafer design, which eliminates problems associated with weld stress. The WT-3 has no thin-walled enclosures such as bellows or welded diaphragms. It is also resistant to water hammer. Choose NPT or BSPT screwed or socketweld connections.

The Series MT from Armstrong is sized precisely to accommodate the extremely low condensate loads found in most instrument steam tracer lines.

NOTE: Since the normal operation of all suppressed temperature-discharge (subcooling) steam traps is to back up condensate, they should not be used on drip legs for saturated steam service, heating or process equipment. Exercise care in the maintenance of any thermostatic wafer trap with a small discharge area susceptible to clogging.


Product Specifications

  • Main Category: Steam and Filter Products
  • Brand: Armstrong
  • Brand: Armstrong International
  • Size: 3/8in
  • Weight (lbs): 0.31
  • Material: Stainless Steel
  • Finish: Stainless Steel
  • Steam Traps: Thermostatic Traps
  • End Connection: Threaded
  • Series: WMT
  • Model: WMT1
  • Part Number: D541398
  • Alt. Size: 3/8"

Applications/Usage & Features

WMT Series Thermostatic Wafer Steam Traps

Stainless Steel

For pressures to 250 psig (17 barg)
Cold water start-up capacities to 1,000 lb/hr (453 kg/hr)

Armstrong’s stainless steel WMT thermostatic wafer traps are designed to last longer than other oversized, all-purpose thermostatic and thermodynamic steam traps. The WMT series feature a water seal to prevent loss of steam through the orifice. The steam trap is designed to automatically adjust to flow rates, including large start-up loads, at all pressures within its range. Choose from NPT or BSPT screwed connections.

Product Reviews