Disc Traps
Steam and Filter Products
View:
Active Filters :
- Main Category: Steam and Filter Products
- Steam Traps: Disc Traps Trap Valve Stations
Part #:501-A21861
- CD-33 Series Disc Steam TrapFor steam service up to 600 psig (42 barg)
Capacities to 2,500 lb/hr (1,134 kg/hr).
The Armstrong CD-33 is a disc-style trap designed to control the traps cycle rate. By reducing the cycle rate, the Armstrong CD-33 extends its service life well beyond that of typical disc traps. This enhanced performance minimizes maintenance time and greatly reduces steam costs.
The CD-33 is designed with three discharge ports, which offer stable disc operation to extend operating life. The capacities of the Armstrong CD-33 have been engineered specifically for the following applications large steam main drips, process equipment and HVAC heating equipment on constant pressure.
The CD-33L (low capacity) trap is designed for the low capacity applications of steam main drips and steam tracing lines. By ensuring that the capacities are designed to suit the applicationand are not oversizedthe CD-33 Series will last longer than other disc traps with excessive capacity ratings. Heres why
• Three-discharge port design
• Minimum wear with controlled cycling
• Freeze resistant
• Hardened seat and disc
Qty:
Part #:501-A21862
- CD-33 Series Disc Steam TrapFor steam service up to 600 psig (42 barg)
Capacities to 2,500 lb/hr (1,134 kg/hr).
The Armstrong CD-33 is a disc-style trap designed to control the traps cycle rate. By reducing the cycle rate, the Armstrong CD-33 extends its service life well beyond that of typical disc traps. This enhanced performance minimizes maintenance time and greatly reduces steam costs.
The CD-33 is designed with three discharge ports, which offer stable disc operation to extend operating life. The capacities of the Armstrong CD-33 have been engineered specifically for the following applications large steam main drips, process equipment and HVAC heating equipment on constant pressure.
The CD-33L (low capacity) trap is designed for the low capacity applications of steam main drips and steam tracing lines. By ensuring that the capacities are designed to suit the applicationand are not oversizedthe CD-33 Series will last longer than other disc traps with excessive capacity ratings. Heres why
• Three-discharge port design
• Minimum wear with controlled cycling
• Freeze resistant
• Hardened seat and disc
Qty:
Part #:501-B4046
- CD-40 and CD-60 Series Controlled Disc Steam TrapsFor pressures to 600 psig (41 barg)
Capacities to 2,850 lb/hr (1 295 kg/hr)
Armstrong CD-40 and CD-60 Series controlled disc traps contain a replaceable capsule, making it possible to renew a worn trap by simply replacing the capsule. A heating chamber in the shell ensures consistent operation. This steam jacket provides a relatively constant temperature in the control chamber regardless of ambient conditions. Cycling rate is controlled and does not increase when the trap is exposed to cold winds, rain or snow. CD-40 Series traps are also available with optional integral .045 perforated stainless steel strainer screens. CD-60 Series traps contain integral strainers with ratios of open area to inside area of pipe that equal or exceed those of most separate Y-type strainers.
Qty:
Part #:501-B4908
- CD-40 and CD-60 Series Controlled Disc Steam TrapsFor pressures to 600 psig (41 barg)
Capacities to 2,850 lb/hr (1 295 kg/hr)
Armstrong CD-40 and CD-60 Series controlled disc traps contain a replaceable capsule, making it possible to renew a worn trap by simply replacing the capsule. A heating chamber in the shell ensures consistent operation. This steam jacket provides a relatively constant temperature in the control chamber regardless of ambient conditions. Cycling rate is controlled and does not increase when the trap is exposed to cold winds, rain or snow. CD-40 Series traps are also available with optional integral .045 perforated stainless steel strainer screens. CD-60 Series traps contain integral strainers with ratios of open area to inside area of pipe that equal or exceed those of most separate Y-type strainers.
Qty:
Part #:501-B4910
- CD-40 and CD-60 Series Controlled Disc Steam TrapsFor pressures to 600 psig (41 barg)
Capacities to 2,850 lb/hr (1 295 kg/hr)
Armstrong CD-40 and CD-60 Series controlled disc traps contain a replaceable capsule, making it possible to renew a worn trap by simply replacing the capsule. A heating chamber in the shell ensures consistent operation. This steam jacket provides a relatively constant temperature in the control chamber regardless of ambient conditions. Cycling rate is controlled and does not increase when the trap is exposed to cold winds, rain or snow. CD-40 Series traps are also available with optional integral .045 perforated stainless steel strainer screens. CD-60 Series traps contain integral strainers with ratios of open area to inside area of pipe that equal or exceed those of most separate Y-type strainers.
Qty:
Part #:501-B5662
- CD-33 Series Disc Steam TrapFor steam service up to 600 psig (42 barg)
Capacities to 2,500 lb/hr (1,134 kg/hr).
The Armstrong CD-33 is a disc-style trap designed to control the traps cycle rate. By reducing the cycle rate, the Armstrong CD-33 extends its service life well beyond that of typical disc traps. This enhanced performance minimizes maintenance time and greatly reduces steam costs.
The CD-33 is designed with three discharge ports, which offer stable disc operation to extend operating life. The capacities of the Armstrong CD-33 have been engineered specifically for the following applications large steam main drips, process equipment and HVAC heating equipment on constant pressure.
The CD-33L (low capacity) trap is designed for the low capacity applications of steam main drips and steam tracing lines. By ensuring that the capacities are designed to suit the applicationand are not oversizedthe CD-33 Series will last longer than other disc traps with excessive capacity ratings. Heres why
• Three-discharge port design
• Minimum wear with controlled cycling
• Freeze resistant
• Hardened seat and disc
Qty:
Part #:501-B5663
- CD-33 Series Disc Steam TrapFor steam service up to 600 psig (42 barg)
Capacities to 2,500 lb/hr (1,134 kg/hr).
The Armstrong CD-33 is a disc-style trap designed to control the traps cycle rate. By reducing the cycle rate, the Armstrong CD-33 extends its service life well beyond that of typical disc traps. This enhanced performance minimizes maintenance time and greatly reduces steam costs.
The CD-33 is designed with three discharge ports, which offer stable disc operation to extend operating life. The capacities of the Armstrong CD-33 have been engineered specifically for the following applications large steam main drips, process equipment and HVAC heating equipment on constant pressure.
The CD-33L (low capacity) trap is designed for the low capacity applications of steam main drips and steam tracing lines. By ensuring that the capacities are designed to suit the applicationand are not oversizedthe CD-33 Series will last longer than other disc traps with excessive capacity ratings. Heres why
• Three-discharge port design
• Minimum wear with controlled cycling
• Freeze resistant
• Hardened seat and disc
Qty:
Part #:501-B5664
- CD-33 Series Disc Steam TrapFor steam service up to 600 psig (42 barg)
Capacities to 2,500 lb/hr (1,134 kg/hr).
The Armstrong CD-33 is a disc-style trap designed to control the traps cycle rate. By reducing the cycle rate, the Armstrong CD-33 extends its service life well beyond that of typical disc traps. This enhanced performance minimizes maintenance time and greatly reduces steam costs.
The CD-33 is designed with three discharge ports, which offer stable disc operation to extend operating life. The capacities of the Armstrong CD-33 have been engineered specifically for the following applications large steam main drips, process equipment and HVAC heating equipment on constant pressure.
The CD-33L (low capacity) trap is designed for the low capacity applications of steam main drips and steam tracing lines. By ensuring that the capacities are designed to suit the applicationand are not oversizedthe CD-33 Series will last longer than other disc traps with excessive capacity ratings. Heres why
• Three-discharge port design
• Minimum wear with controlled cycling
• Freeze resistant
• Hardened seat and disc
Qty:
Part #:501-B5666
- CD-33 Series Disc Steam TrapFor steam service up to 600 psig (42 barg)
Capacities to 2,500 lb/hr (1,134 kg/hr).
The Armstrong CD-33 is a disc-style trap designed to control the traps cycle rate. By reducing the cycle rate, the Armstrong CD-33 extends its service life well beyond that of typical disc traps. This enhanced performance minimizes maintenance time and greatly reduces steam costs.
The CD-33 is designed with three discharge ports, which offer stable disc operation to extend operating life. The capacities of the Armstrong CD-33 have been engineered specifically for the following applications large steam main drips, process equipment and HVAC heating equipment on constant pressure.
The CD-33L (low capacity) trap is designed for the low capacity applications of steam main drips and steam tracing lines. By ensuring that the capacities are designed to suit the applicationand are not oversizedthe CD-33 Series will last longer than other disc traps with excessive capacity ratings. Heres why
• Three-discharge port design
• Minimum wear with controlled cycling
• Freeze resistant
• Hardened seat and disc
Qty:
Part #:501-B5667
- CD-33 Series Disc Steam TrapFor steam service up to 600 psig (42 barg)
Capacities to 2,500 lb/hr (1,134 kg/hr).
The Armstrong CD-33 is a disc-style trap designed to control the traps cycle rate. By reducing the cycle rate, the Armstrong CD-33 extends its service life well beyond that of typical disc traps. This enhanced performance minimizes maintenance time and greatly reduces steam costs.
The CD-33 is designed with three discharge ports, which offer stable disc operation to extend operating life. The capacities of the Armstrong CD-33 have been engineered specifically for the following applications large steam main drips, process equipment and HVAC heating equipment on constant pressure.
The CD-33L (low capacity) trap is designed for the low capacity applications of steam main drips and steam tracing lines. By ensuring that the capacities are designed to suit the applicationand are not oversizedthe CD-33 Series will last longer than other disc traps with excessive capacity ratings. Heres why
• Three-discharge port design
• Minimum wear with controlled cycling
• Freeze resistant
• Hardened seat and disc
Qty:
Part #:501-D15970
- CD-40 and CD-60 Series Controlled Disc Steam TrapsFor pressures to 600 psig (41 barg)
Capacities to 2,850 lb/hr (1 295 kg/hr)
Armstrong CD-40 and CD-60 Series controlled disc traps contain a replaceable capsule, making it possible to renew a worn trap by simply replacing the capsule. A heating chamber in the shell ensures consistent operation. This steam jacket provides a relatively constant temperature in the control chamber regardless of ambient conditions. Cycling rate is controlled and does not increase when the trap is exposed to cold winds, rain or snow. CD-40 Series traps are also available with optional integral .045 perforated stainless steel strainer screens. CD-60 Series traps contain integral strainers with ratios of open area to inside area of pipe that equal or exceed those of most separate Y-type strainers.
Qty:
Part #:501-D15972
- CD-40 and CD-60 Series Controlled Disc Steam TrapsFor pressures to 600 psig (41 barg)
Capacities to 2,850 lb/hr (1 295 kg/hr)
Armstrong CD-40 and CD-60 Series controlled disc traps contain a replaceable capsule, making it possible to renew a worn trap by simply replacing the capsule. A heating chamber in the shell ensures consistent operation. This steam jacket provides a relatively constant temperature in the control chamber regardless of ambient conditions. Cycling rate is controlled and does not increase when the trap is exposed to cold winds, rain or snow. CD-40 Series traps are also available with optional integral .045 perforated stainless steel strainer screens. CD-60 Series traps contain integral strainers with ratios of open area to inside area of pipe that equal or exceed those of most separate Y-type strainers.
Qty:
Part #:501-D3609
- TVS 4000 Series Stainless Steel Trap Valve Station
Stainless Steel
The stainless steel version of the remarkable Armstrong Trap Valve Station (TVS) gives you two piston-style isolation valves, a test valve and an integral stainless steel strainer with blowdown valveall merged in a single, versatile package. Whats more, the unique Armstrong connector makes the TVS compatible with all of these
• Inverted bucket
• Disc
• Thermostatic
• Thermostatic wafer
• Bimetallic
• Float and thermostatic
• Two-bolt steam traps from other manufacturersWith Armstrongs Trap Valve Station, youll profit from all of these benefits
• Reduced costs. TVS saves by eliminating potential leak points and reducing installation and maintenance time.
• Multiple functions. TVS has test and strainer blowdown valves. When installed with Armstrong Model 2011 and 2022 steam traps, it will also accommodate the Armstrong pop drain, and SteamEyeremote steam trap monitoring and testing devices.
• Reduced design time. Permits combining products with exact face-to-face dimensions.
• Three-year guarantee. The TVS is guaranteed for three years.
• Easy, in-line repairability with maximum safety. TVS allows isolation at point of service with upstream/downstream depressurization.
• Installation versatility. The TVS is adaptable to any manufacturers two-bolt steam trap and piping configuration.
• Simplified trap testing. You get enhanced capability to check trap operation and a built-in method to block and bleed traps.
Qty:
Part #:501-D3611
- TVS 4000 Series Stainless Steel Trap Valve Station
Stainless Steel
The stainless steel version of the remarkable Armstrong Trap Valve Station (TVS) gives you two piston-style isolation valves, a test valve and an integral stainless steel strainer with blowdown valveall merged in a single, versatile package. Whats more, the unique Armstrong connector makes the TVS compatible with all of these
• Inverted bucket
• Disc
• Thermostatic
• Thermostatic wafer
• Bimetallic
• Float and thermostatic
• Two-bolt steam traps from other manufacturersWith Armstrongs Trap Valve Station, youll profit from all of these benefits
• Reduced costs. TVS saves by eliminating potential leak points and reducing installation and maintenance time.
• Multiple functions. TVS has test and strainer blowdown valves. When installed with Armstrong Model 2011 and 2022 steam traps, it will also accommodate the Armstrong pop drain, and SteamEyeremote steam trap monitoring and testing devices.
• Reduced design time. Permits combining products with exact face-to-face dimensions.
• Three-year guarantee. The TVS is guaranteed for three years.
• Easy, in-line repairability with maximum safety. TVS allows isolation at point of service with upstream/downstream depressurization.
• Installation versatility. The TVS is adaptable to any manufacturers two-bolt steam trap and piping configuration.
• Simplified trap testing. You get enhanced capability to check trap operation and a built-in method to block and bleed traps.
Qty:
Part #:501-D3612
- TVS 4000 Series Stainless Steel Trap Valve Station
Stainless Steel
The stainless steel version of the remarkable Armstrong Trap Valve Station (TVS) gives you two piston-style isolation valves, a test valve and an integral stainless steel strainer with blowdown valveall merged in a single, versatile package. Whats more, the unique Armstrong connector makes the TVS compatible with all of these
• Inverted bucket
• Disc
• Thermostatic
• Thermostatic wafer
• Bimetallic
• Float and thermostatic
• Two-bolt steam traps from other manufacturersWith Armstrongs Trap Valve Station, youll profit from all of these benefits
• Reduced costs. TVS saves by eliminating potential leak points and reducing installation and maintenance time.
• Multiple functions. TVS has test and strainer blowdown valves. When installed with Armstrong Model 2011 and 2022 steam traps, it will also accommodate the Armstrong pop drain, and SteamEyeremote steam trap monitoring and testing devices.
• Reduced design time. Permits combining products with exact face-to-face dimensions.
• Three-year guarantee. The TVS is guaranteed for three years.
• Easy, in-line repairability with maximum safety. TVS allows isolation at point of service with upstream/downstream depressurization.
• Installation versatility. The TVS is adaptable to any manufacturers two-bolt steam trap and piping configuration.
• Simplified trap testing. You get enhanced capability to check trap operation and a built-in method to block and bleed traps.
Qty:
Part #:501-D4802
- TVS 4000F Series Stainless Steel Trap Valve Station
Stainless Steel
A complete package featuring two piston-style isolation valves, test valve and integral stainless steel strainer with blowdown valve. You'll realize all the benefits of a piston valve integrated into the same space-saving package.br
Features
• Reduced costs. TVS saves by eliminating potential leak points and reducing installation and maintenance time.
• Multiple functions. TVS has test and strainer blowdown valves. When installed with Armstrong Model 2011 and 2022 steam traps, it will also accommodate the Armstrong pop drain, and SteamEyeremote steam trap monitoring and testing devices.
• Reduced design time. Permits combining products with exact face-to-face dimensions.
• Three-year guarantee. The TVS is guaranteed for three years.
• Easy, in-line repairability with maximum safety. TVS allows isolation at point of service with upstream/downstream depressurization.
• Installation versatility. The TVS is adaptable to any manufacturers two-bolt steam trap and piping configuration.
• Simplified trap testing. You get enhanced capability to check trap operation and a built-in method to block and bleed traps. • Integral Flanges. The body and connections are of one piece construction, free of welds and other potential leak paths.
Qty:
Part #:501-D4803
- TVS 4000F Series Stainless Steel Trap Valve Station
Stainless Steel
A complete package featuring two piston-style isolation valves, test valve and integral stainless steel strainer with blowdown valve. You'll realize all the benefits of a piston valve integrated into the same space-saving package.br
Features
• Reduced costs. TVS saves by eliminating potential leak points and reducing installation and maintenance time.
• Multiple functions. TVS has test and strainer blowdown valves. When installed with Armstrong Model 2011 and 2022 steam traps, it will also accommodate the Armstrong pop drain, and SteamEyeremote steam trap monitoring and testing devices.
• Reduced design time. Permits combining products with exact face-to-face dimensions.
• Three-year guarantee. The TVS is guaranteed for three years.
• Easy, in-line repairability with maximum safety. TVS allows isolation at point of service with upstream/downstream depressurization.
• Installation versatility. The TVS is adaptable to any manufacturers two-bolt steam trap and piping configuration.
• Simplified trap testing. You get enhanced capability to check trap operation and a built-in method to block and bleed traps. • Integral Flanges. The body and connections are of one piece construction, free of welds and other potential leak paths.
Qty:
Part #:501-D4976
- TVS 4000 Series Stainless Steel Trap Valve Station
Stainless Steel
The stainless steel version of the remarkable Armstrong Trap Valve Station (TVS) gives you two piston-style isolation valves, a test valve and an integral stainless steel strainer with blowdown valveall merged in a single, versatile package. Whats more, the unique Armstrong connector makes the TVS compatible with all of these
• Inverted bucket
• Disc
• Thermostatic
• Thermostatic wafer
• Bimetallic
• Float and thermostatic
• Two-bolt steam traps from other manufacturersWith Armstrongs Trap Valve Station, youll profit from all of these benefits
• Reduced costs. TVS saves by eliminating potential leak points and reducing installation and maintenance time.
• Multiple functions. TVS has test and strainer blowdown valves. When installed with Armstrong Model 2011 and 2022 steam traps, it will also accommodate the Armstrong pop drain, and SteamEyeremote steam trap monitoring and testing devices.
• Reduced design time. Permits combining products with exact face-to-face dimensions.
• Three-year guarantee. The TVS is guaranteed for three years.
• Easy, in-line repairability with maximum safety. TVS allows isolation at point of service with upstream/downstream depressurization.
• Installation versatility. The TVS is adaptable to any manufacturers two-bolt steam trap and piping configuration.
• Simplified trap testing. You get enhanced capability to check trap operation and a built-in method to block and bleed traps.
Qty:
Part #:501-D4977
- TVS 4000 Series Stainless Steel Trap Valve Station
Stainless Steel
The stainless steel version of the remarkable Armstrong Trap Valve Station (TVS) gives you two piston-style isolation valves, a test valve and an integral stainless steel strainer with blowdown valveall merged in a single, versatile package. Whats more, the unique Armstrong connector makes the TVS compatible with all of these
• Inverted bucket
• Disc
• Thermostatic
• Thermostatic wafer
• Bimetallic
• Float and thermostatic
• Two-bolt steam traps from other manufacturersWith Armstrongs Trap Valve Station, youll profit from all of these benefits
• Reduced costs. TVS saves by eliminating potential leak points and reducing installation and maintenance time.
• Multiple functions. TVS has test and strainer blowdown valves. When installed with Armstrong Model 2011 and 2022 steam traps, it will also accommodate the Armstrong pop drain, and SteamEyeremote steam trap monitoring and testing devices.
• Reduced design time. Permits combining products with exact face-to-face dimensions.
• Three-year guarantee. The TVS is guaranteed for three years.
• Easy, in-line repairability with maximum safety. TVS allows isolation at point of service with upstream/downstream depressurization.
• Installation versatility. The TVS is adaptable to any manufacturers two-bolt steam trap and piping configuration.
• Simplified trap testing. You get enhanced capability to check trap operation and a built-in method to block and bleed traps.
Qty:
Part #:501-D4978
- TVS 4000 Series Stainless Steel Trap Valve Station
Stainless Steel
The stainless steel version of the remarkable Armstrong Trap Valve Station (TVS) gives you two piston-style isolation valves, a test valve and an integral stainless steel strainer with blowdown valveall merged in a single, versatile package. Whats more, the unique Armstrong connector makes the TVS compatible with all of these
• Inverted bucket
• Disc
• Thermostatic
• Thermostatic wafer
• Bimetallic
• Float and thermostatic
• Two-bolt steam traps from other manufacturersWith Armstrongs Trap Valve Station, youll profit from all of these benefits
• Reduced costs. TVS saves by eliminating potential leak points and reducing installation and maintenance time.
• Multiple functions. TVS has test and strainer blowdown valves. When installed with Armstrong Model 2011 and 2022 steam traps, it will also accommodate the Armstrong pop drain, and SteamEyeremote steam trap monitoring and testing devices.
• Reduced design time. Permits combining products with exact face-to-face dimensions.
• Three-year guarantee. The TVS is guaranteed for three years.
• Easy, in-line repairability with maximum safety. TVS allows isolation at point of service with upstream/downstream depressurization.
• Installation versatility. The TVS is adaptable to any manufacturers two-bolt steam trap and piping configuration.
• Simplified trap testing. You get enhanced capability to check trap operation and a built-in method to block and bleed traps.
Qty:
Part #:501-D4979
- TVS 4000 Series Stainless Steel Trap Valve Station
Stainless Steel
The stainless steel version of the remarkable Armstrong Trap Valve Station (TVS) gives you two piston-style isolation valves, a test valve and an integral stainless steel strainer with blowdown valveall merged in a single, versatile package. Whats more, the unique Armstrong connector makes the TVS compatible with all of these
• Inverted bucket
• Disc
• Thermostatic
• Thermostatic wafer
• Bimetallic
• Float and thermostatic
• Two-bolt steam traps from other manufacturersWith Armstrongs Trap Valve Station, youll profit from all of these benefits
• Reduced costs. TVS saves by eliminating potential leak points and reducing installation and maintenance time.
• Multiple functions. TVS has test and strainer blowdown valves. When installed with Armstrong Model 2011 and 2022 steam traps, it will also accommodate the Armstrong pop drain, and SteamEyeremote steam trap monitoring and testing devices.
• Reduced design time. Permits combining products with exact face-to-face dimensions.
• Three-year guarantee. The TVS is guaranteed for three years.
• Easy, in-line repairability with maximum safety. TVS allows isolation at point of service with upstream/downstream depressurization.
• Installation versatility. The TVS is adaptable to any manufacturers two-bolt steam trap and piping configuration.
• Simplified trap testing. You get enhanced capability to check trap operation and a built-in method to block and bleed traps.
Qty:
Part #:501-D500578
- CD-40 and CD-60 Series Controlled Disc Steam TrapsFor pressures to 600 psig (41 barg)
Capacities to 2,850 lb/hr (1 295 kg/hr)
Armstrong CD-40 and CD-60 Series controlled disc traps contain a replaceable capsule, making it possible to renew a worn trap by simply replacing the capsule. A heating chamber in the shell ensures consistent operation. This steam jacket provides a relatively constant temperature in the control chamber regardless of ambient conditions. Cycling rate is controlled and does not increase when the trap is exposed to cold winds, rain or snow. CD-40 Series traps are also available with optional integral .045 perforated stainless steel strainer screens. CD-60 Series traps contain integral strainers with ratios of open area to inside area of pipe that equal or exceed those of most separate Y-type strainers.
Qty:
Part #:501-D501439
- CD-40 and CD-60 Series Controlled Disc Steam TrapsFor pressures to 600 psig (41 barg)
Capacities to 2,850 lb/hr (1 295 kg/hr)
Armstrong CD-40 and CD-60 Series controlled disc traps contain a replaceable capsule, making it possible to renew a worn trap by simply replacing the capsule. A heating chamber in the shell ensures consistent operation. This steam jacket provides a relatively constant temperature in the control chamber regardless of ambient conditions. Cycling rate is controlled and does not increase when the trap is exposed to cold winds, rain or snow. CD-40 Series traps are also available with optional integral .045 perforated stainless steel strainer screens. CD-60 Series traps contain integral strainers with ratios of open area to inside area of pipe that equal or exceed those of most separate Y-type strainers.
Qty:
Part #:501-D503048
- CD-40 and CD-60 Series Controlled Disc Steam TrapsFor pressures to 600 psig (41 barg)
Capacities to 2,850 lb/hr (1 295 kg/hr)
Armstrong CD-40 and CD-60 Series controlled disc traps contain a replaceable capsule, making it possible to renew a worn trap by simply replacing the capsule. A heating chamber in the shell ensures consistent operation. This steam jacket provides a relatively constant temperature in the control chamber regardless of ambient conditions. Cycling rate is controlled and does not increase when the trap is exposed to cold winds, rain or snow. CD-40 Series traps are also available with optional integral .045 perforated stainless steel strainer screens. CD-60 Series traps contain integral strainers with ratios of open area to inside area of pipe that equal or exceed those of most separate Y-type strainers.
Qty:
Displaying: 1 - 24 of 39 Matching Items