10in
1-1/2in x 1-1/4in x 3/4in
View:
Active Filters :
Part #:811827
- 1/2" Drive Impact Extensions
Overview
&bull Specially heat treated for impact use to provide long life, safety, and durability
&bull Spring plunger provides secure socket retention for safety and convenience
&bull Suitable for use with pneumatic and electric impact wrenches
Qty:
Qty:
closeout
$277.65 MSRP
$
172.42
Part #:810316
- CLOSEOUTS Only 1 Left!
- Copper Plated Screw C-Clamp Capacity 10" &bull Copper plated screw resists weld splatter &bull Drop-forged and heat treated for maximum strength and greater rigidity &bull I-Beam design for extra strength &bull Highly resistant to &rdquospringing&rdquo
Qty:
Part #:203867
- Socket Clamps Pipe OD 11.10in, 5/8in-11 x 3in Bolt Size, Stock Size 1/2in x 2in,
For use in preventing underground pipe joints from separating
Also known as &ldquoRetainer Clamps&rdquo or &ldquoFriction Clamps&rdquo. Designed for centrifugally-spun cast and ductile iron pipe with OD&rsquos as shown in the table below.
All Socket Clamps include two half clamps, two bolts and nuts and two washers. Sizes 3&Prime through 12&Prime are supplied with #585 cast washers, which are shown below as replacement parts. Sizes 14&Prime and larger are supplied with two fabricated washers.
Used with all-thread rod and Trumbull tie-lugs or tie-bolts for joint restraint, shown
Qty:
Part #:501-D25985
- DS Series In-Line Condensate SeparatorsCarbon Steel Drain SeparatorCondensate in steam and air piping reduces thermal efficiency, causes water hammer, corrodes equipment such as valves and pipes, and causes other problems.
In-line (drain) separators DS-1, DS-2, DS-3, and DS-4 separate condensate efficiently by using the centrifugal force of steam or air created by introducing it into a specifically shaped path. Because of the simple structure of the drain separators, pressure loss is minimized, enabling clean, dry steam or air to be fed to equipment.
When steam or air flow enters the drain separator, centrifugal force is generated in the fluid because of the devices internal structural design. The fluid drains along the wall because of the difference in specific gravity with steam or air, eventually striking the baffle. The baffle guides the fluid to the drain outlet and to the trap, which drains it. As a result, small dirt particles and condensate are separated and removed from the system through the bottom drain.
• Cyclone structure maximizes liquid separation efficiency
• Pressure loss is extremely low
• No moving parts means no breakdowns
Qty:
Part #:501-D25986
- DS Series In-Line Condensate SeparatorsCarbon Steel Drain SeparatorCondensate in steam and air piping reduces thermal efficiency, causes water hammer, corrodes equipment such as valves and pipes, and causes other problems.
In-line (drain) separators DS-1, DS-2, DS-3, and DS-4 separate condensate efficiently by using the centrifugal force of steam or air created by introducing it into a specifically shaped path. Because of the simple structure of the drain separators, pressure loss is minimized, enabling clean, dry steam or air to be fed to equipment.
When steam or air flow enters the drain separator, centrifugal force is generated in the fluid because of the devices internal structural design. The fluid drains along the wall because of the difference in specific gravity with steam or air, eventually striking the baffle. The baffle guides the fluid to the drain outlet and to the trap, which drains it. As a result, small dirt particles and condensate are separated and removed from the system through the bottom drain.
• Cyclone structure maximizes liquid separation efficiency
• Pressure loss is extremely low
• No moving parts means no breakdowns
Qty:
Part #:501-D27092
- AEH Series Exhaust Heads Armstrongs AEH series carbon steel exhaust heads should be used when there is a risk of water carryover up an atmospheric vent pipe. The internal knock-out plate and stainless steel mesh screening effectively contains water carry-over and discharges it through the bottom drain leaving dry flash steam to vent through the top of the vessel.
Connections
• Flanged ASME B16.5 CL 150
• Drain FNPT
Qty:
Qty:
Qty:
Qty:
Qty:
Part #:511-BYV11100A0VG000
Qty:
Part #:511-BYV11100A0VGI00
Qty:
Qty:
Qty:
Part #:417-24500107506001
- 245 Redi-Clamp - For repairing punctures, splits, or holes in pipe.
Description A repair clamp designed to repair pin holes, punctures or splits. Application Works on Steel, PVC, HDPE, and Copper tube.
Key Features
Built to a specific pipe O.D.
Drop-in bolts help ease installation
Standard widths are 3", 6", 9" and 12"
Available in IPS, Copper tube, Ductile Iron and other sizes
Lugs are epoxy coated for great corrosion resistance&bullProvides 360º coverage, covering the full pipe surface
18-8 Type 304 Stainless Steel band for corrosion resistance
Economical means of repairing pin hole leaks, punctures and splits in pipe
$
207.00
Qty:
Part #:1167-004710
- Heavy Duty End Iron Pipe Wrenches
Heavy Duty End Wrenches and allow for usage in areas with space restrictions.
HEAVY DUTY END IRON PIPE WRENCHES Manufactured to U.S. Specifications GGG-W-651e Type VI
Qty:
Part #:785-1410741
- Shielded Rubber Coupling 10" Culvert Coupling ADS/Hancor/JM Eagle x 10" Culvert Coupling ADS/Hancor/JM Eagle
$
325.41
Qty:
Part #:228-430X
- 430®X 10-inch SPEEDGRIP Straight Jaw Tongue & Groove Pliers
CHANNELLOCK® SPEEDGRIP&trade 430®X Tongue & Groove Pliers make fast and easy non-slip adjustments so you can get the job done even quicker. Laser-hardened crosshatch teeth grip stronger and last longer thanks to innovative engineering. There is also a reaming feature for easy deburring of pipe. Finally, like all CHANNELLOCK® pliers, SPEEDGRIP&trade 430®X Tongue & Groove Pliers are made in the USA from high carbon U.S. steel for ultimate strength and have comfort handles with no-slip grips. US Patent No. 12,280,481
15 PUSH-BUTTON ADJUSTMENTS lock securely into undercut channels
STRONG, laser heat-treated crosshatch teeth grip 2.5X better than traditional CHANNELLOCK 90-degree teeth
SOLID alloy steel fastener is strong and dependable
SAFE-T-STOP® feature prevents finger pinch
REAMING feature for easily deburring pipe
FORGED high carbon U.S. steel for ultimate strength is specially coated for rust prevention
CHANNELLOCK BLUE® molded non-slip grips for ultimate control and comfort
100% MADE IN USA
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Displaying: 73 - 96 of 104 Matching Items