Copper Tube and Fittings
Pipe, Fittings, and Flanges
Active Filters :
- Main Category: Pipe, Fittings, and Flanges
- Pipe and Fittings: Copper Tube and Fittings
$
1.27
FT
Qty:
$
1.79
FT
Qty:
$
1.75
FT
Qty:
Qty:
Qty:
Qty:
Part #:101200
- asc-es.comSCI® Press - Copper FittingsApplications*Fluids containing hydrocarbon-based oils are not compatible with the EPDM seal.All copper tubing must comply with the ASTM B88 standard. Fittings are approved for installations above and below ground as permitted by local building codes.Copper Fitting Alloy C1220 has been evaluated by IAPMO R&T Lab to NSF/ANSI 61 for use in drinking water supplies of pH 6.5 and above. Drinking water supplies that are less than pH 6.5may require corrosion control to limit leaching of copper into the drinking water.PS-10.22 page 2 PS-SUB-SCI Press-Cooper-v01 20221020SCI Press Copper Fittings are intended for use with ASTM B88 seamless copperwater tube (Types K, L, & M) in residential and commercial plumbing andmechanical systems. Common applications are listed below:
- Types of Service Pressure Temperature EPDM Compatibility*Liquids/Potable WaterWater Systems 300 psi (Test pressure of 600 psi) -20°F to 248° YSteam (Residential) 5 psi Max 227° YAcetone (Liquid) 70 psi -14° to 104°' YFuel, Oil, LubricantsEthanol (Pure grain alcohol) 200 psi Ambient, less than 250° YGasesCompressed Air(Oil concentration ≤25 mg/m3) 200 psi Max 140° YNitrogen 200 psi Max 140° YCarbon Dioxide 200 psi Max 140° YCarbon Monoxide 200 psi Max 140° YArgon 200 psi Max 140° YOxygen(Non-Medical, Keep free of oil and grease) 140 psi Max 140° YHydrogen 125 psi Max 140° YVacuum (Maximum absolute pressure) 750μm Hg Max 160° YVacuum (Maximum differential pressure) 29.2" Hg Max 160° Y
$
3.08
Qty:
Part #:101202
- The SCI Press Technology for Copper Systems includes couplings, elbows, tees, adapters, reducers, caps, unions, and flanges for mechanical copper systems. They provide an economical and reliable piping connection that can be used for commercial, industrial, and residential markets eliminating the need of using conventional methods of soldering and brazing. SCI Press Copper Fittings are intended for use with ASTM B88, Types K, L, and M hard copper tubing in sizes ½" to 4" and soft copper tubing in sizes ½" to 1¼". After visual confirmation of each connection, a system pressure test may be performed in accordance with local code requirements. The SCI Press Technology for Copper Systems is compatible with common pressing tools and jaws.
$
3.62
Qty:
Qty:
Qty:
Qty:
$
0.99
FT
Qty:
$
2.66
FT
Qty:
Qty:
Qty:
Displaying: 1 - 24 of 185 Matching Items