Pneumatic Actuators
Valves and Actuators
Active Filters :
- Main Category: Valves and Actuators
- Actuators: Pneumatic Actuators
Part #:705850
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:708705
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:708713
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:708714
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:708717
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:708721
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:709250
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:709251
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:709253
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:709476
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:709813
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:710076
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:704803
- Feature Adjustable travel stops • Allow the actuator to be adjusted in both fully open as well as fully closed position.High cycle-life design • Rolling diaphragm design, along with new one-piece diaphragm retainer and UHMW Polyethlene bearing, assures extremely long cycle-life. • Low-friction operation provides exceptionally smooth actuation.Wide supply pressure range • Unlike most spring-diaphragm actuators, the Quadra-PowrX can be operated up to 7 bar (100 psi). • Actuators are available with four different spring ranges for 1.3, 2.8, 4.1 & 5.5 bar (20 psi, 40 psi, 60 psi, and80 psi) supply pressures.Low friction bearings • Acetal-lined stainless steel backed bearings offer a low coefficient of friction that allows virtually all of the available torque to be delivered directly to the outputshaft. • Keeps the actuator size as small as possible while delivering hundreds of thousands of smooth cycles. • UHMW Polyethylene bearing fully guides the diaphragm retainer through stroke of actuator, ensuring smooth operation and low friction.Completely field reversible • Fail-open or fail-close operation can be quickly changed in the field by simply inverting the actuator.Top and bottom mounting pads are identical. • Springs are pre-loaded in a self-contained cartridge for safer handling and easier maintenance.Corrosion resistant • Zinc phosphate epoxy based primer coat and UV resistant polyurethane top coat provide durability and protection in corrosive atmospheres. • All stainless steel external fasteners. • A “Wet conditions kit” available for extreme environments. Low maintenance • Lubricated at the factory. No further lubrication is required. Easily fitted with a variety of accessories • Wide range of optional accessories and control devices, which include direct-mount sandwich manual overrides, limit switches, position indicators, two-stage flow controllers, positioning and programmable cycling controllers, are available to satisfy virtually all automatic valve requirements.:
Qty:
Part #:708707
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:708712
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:708715
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:708716
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:708720
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:709051
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:709252
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:709493
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:709801
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Part #:710077
- Single-Source Responsibility• Valves, actuators, and accessories are designed to operate as a unit with the highest degree of compatibility. • Valves, actuators, and accessories can be supplied completely assembled to provide unit responsibility from a single source. Versatility• Modular designs with same body and end caps for double-acting and spring-return. Springs can be added in the field to convert double-acting to spring return or for changes in supply pressure. • Failure direction can be easily reversed from spring to-open or spring-to-close orientation simply by inverting the pistons. • Actuator to valve attachments comply with ISO 5211. • Solenoid valve and accessory attachments comply with NAMUR VDI/VDE 3845. • A wide range of optional accessories and control devices that include limit switches, solenoid valves, and mechanical safety lockouts are available to satisfy virtually all automated valve requirements.Long Life Cycle•Bearings on all sliding and rotating moving parts to ensure long life.•Dual piston rack-and-pinion mechanism for simple construction, high cycle life, and constant torque.•Hard-anodized PTFE-coated extruded aluminum body with honed internal surface for strength and lower coefficient of friction.•Mechanically multi-guided aluminum pistons for precise movement, low friction, and high cycle life.•Machined teeth on piston racks and pinions for excellent rack and pinion engagement and maximum efficiency.Corrosion Resistant•Hard-anodized PTFE-coated body, polyester-coated end caps, and epoxy-coated springs, along with internal and external stainless steel fasteners, provide corrosion resistance in a variety of difficult applications and environments. Reliability• Safety-contained multi-spring design with preloaded and heavy-duty coated springs for simpler range versatility, greater safety, and corrosion resistance.• External adjustable stops in both directions assure flexibility and accuracy when setting the valve in the open and closed positions.•As an added safety feature, the external adjustment screws are designed to start venting internal pneumatic pressure in the actuator before the screw is fully backed out. The sound of escaping pressure indicates an unsafe condition.:
Qty:
Qty:
Displaying: 1 - 24 of 24 Matching Items