Bottom Inlet Air Vents
Steam and Filter Products
Active Filters :
- Main Category: Steam and Filter Products
- Air Vents and Exhaust Heads: Bottom Inlet Air Vents
Part #:501-C3510-1
- 1-AV Series Air and Gas VentsFor pressures to 300 psig (21 bar) or specific gravity down to 0.40.
1-AVA cast iron air vent that uses a free-floating lever that closes positively, ensuring a leaktight closing under all conditions. This vent is good for low capacity air/gas venting up to 300 psi (21 bar).
Qty:
Part #:501-C3510-12
- 1-AV Series Air and Gas VentsFor pressures to 300 psig (21 bar) or specific gravity down to 0.40.
1-AVA cast iron air vent that uses a free-floating lever that closes positively, ensuring a leaktight closing under all conditions. This vent is good for low capacity air/gas venting up to 300 psi (21 bar).
Qty:
Part #:501-C3510-2
- 1-AV Series Air and Gas VentsFor pressures to 300 psig (21 bar) or specific gravity down to 0.40.
1-AVA cast iron air vent that uses a free-floating lever that closes positively, ensuring a leaktight closing under all conditions. This vent is good for low capacity air/gas venting up to 300 psi (21 bar).
Qty:
Part #:501-C3510-3
$
0.00
Qty:
Part #:501-C3510-7
Qty:
Armstrong TAVB-2 1/2in NPT Stainless Steel, Air Vent/ Vacuum Breaker, Bottom Inlet, Top Outlet C5490
- Thermostatic Air Vents
Armstrong offers thermostatic air vents for positive venting of air and other non-condensable gases from steam in chamber-type heat-transfer equipment. Typical applications include jacketed kettles, retorts, vulcanizers, jacketed sterilizers or other contained equipment where air could accumulate in remote areas of the steam chamber and reduce heat-transfer capacity. These vents are balanced-pressure air vents that respond to the pressure-temperature curve of steam. Air is automatically vented at slightly below steam temperature throughout the entire operating pressure range.
Qty:
Armstrong TAVB-3 3/4in NPT Stainless Steel, Air Vent/ Vacuum Breaker, Bottom Inlet, Top Outlet C5491
- Thermostatic Air Vents
Armstrong offers thermostatic air vents for positive venting of air and other non-condensable gases from steam in chamber-type heat-transfer equipment. Typical applications include jacketed kettles, retorts, vulcanizers, jacketed sterilizers or other contained equipment where air could accumulate in remote areas of the steam chamber and reduce heat-transfer capacity. These vents are balanced-pressure air vents that respond to the pressure-temperature curve of steam. Air is automatically vented at slightly below steam temperature throughout the entire operating pressure range.
Qty:
Armstrong 22AV 3/4in NPT 5/32in Orifice Stainless Steel, Air Vent, Bottom Inlet - Top Outlet D500017
Qty:
Armstrong 22AV 3/4in NPT 7/64in Orifice Stainless Steel, Air Vent, Bottom Inlet - Top Outlet D500018
Qty:
Part #:501-D500036
Qty:
Part #:501-D500248
Qty:
Part #:501-D500391
Qty:
Armstrong 22AV 3/4in NPT 5/64in Orifice Stainless Steel, Air Vent, Bottom Inlet - Top Outlet D500467
Qty:
Part #:501-D500524
Qty:
Part #:501-D500631
Qty:
Part #:501-D500975
- 1-AV Series Air and Gas VentsFor pressures to 300 psig (21 bar) or specific gravity down to 0.40.
1-AVA cast iron air vent that uses a free-floating lever that closes positively, ensuring a leaktight closing under all conditions. This vent is good for low capacity air/gas venting up to 300 psi (21 bar).
Qty:
Part #:501-D501076
Qty:
Part #:501-D501184
- 1-AV Series Air and Gas VentsFor pressures to 300 psig (21 bar) or specific gravity down to 0.40. 1-AV&mdashA cast iron air vent that uses a free-floating lever that closes positively, ensuring a leaktight closing under all conditions. This vent is good for low capacity air/gas venting up to 300 psi (21 bar).
Qty:
Part #:501-D501212
Qty:
Part #:501-D501408
Qty:
Part #:501-D501713
Qty:
Part #:501-D501841
- 1-AV Series Air and Gas VentsFor pressures to 300 psig (21 bar) or specific gravity down to 0.40.
1-AVA cast iron air vent that uses a free-floating lever that closes positively, ensuring a leaktight closing under all conditions. This vent is good for low capacity air/gas venting up to 300 psi (21 bar).
Qty:
Part #:501-D502149
Qty:
Part #:501-D502384
Qty:
Displaying: 1 - 24 of 68 Matching Items