High Performance Butterfly Valves
Valves and Actuators


Displaying: 1 - 24 of 24 Matching Items
24 Items
View:
Active Filters :
Part #:703544
Offset Shaft and Eccentric Disc • No seat/disc contact in the open or intermediate position • Eliminates wear points at top and bottom of seats for higher cycle life • Reduces torque requirements, allowing for smaller operators Fire-Tested Version Available • Fire-Tite® Wafer-Sphere valves have been tested to API 607 and ISO-10497-5:
2004 Positive Shaft Retention • 2-1/2” - 24” (DN 65 - 600) valves are equipped with a retaining ring at the top of the shaft to prevent movement of the top portion of the shaft past the compression ring if for any reason the shaft should break within the valve. Easy Seat Maintenance • Simply remove body insert and replace seat – disassembly of disc and shaft is not required. Excellent for both On-Off and Control Applications • Superior control characteristics. • Inherent flow characteristic is modified equal percentage. • Wide rangeability. • Tight shut-off even in control applications. •Standard lugged style valves are suitable for bidirectional dead-end service at the full pressuretemperature rating of the valve.
$1,468.00 MSRP $ 1,101.00
Qty:
add to cart
Part #:708927
Offset Shaft and Eccentric Disc • No seat/disc contact in the open or intermediate position • Eliminates wear points at top and bottom of seats for higher cycle life • Reduces torque requirements, allowing for smaller operators Fire-Tested Version Available • Fire-Tite® Wafer-Sphere valves have been tested to API 607 and ISO-10497-5:
2004 Positive Shaft Retention • 2-1/2” - 24” (DN 65 - 600) valves are equipped with a retaining ring at the top of the shaft to prevent movement of the top portion of the shaft past the compression ring if for any reason the shaft should break within the valve. Easy Seat Maintenance • Simply remove body insert and replace seat – disassembly of disc and shaft is not required. Excellent for both On-Off and Control Applications • Superior control characteristics. • Inherent flow characteristic is modified equal percentage. • Wide rangeability. • Tight shut-off even in control applications. •Standard lugged style valves are suitable for bidirectional dead-end service at the full pressuretemperature rating of the valve.
$2,166.00 MSRP $ 1,624.50
Qty:
add to cart
Part #:709837
Item Name :
Butterfly Valve Type
$ 289.00
Qty:
add to cart
Part #:702726
Offset Shaft and Eccentric Disc • No seat/disc contact in the open or intermediate position • Eliminates wear points at top and bottom of seats for higher cycle life • Reduces torque requirements, allowing for smaller operators Fire-Tested Version Available • Fire-Tite® Wafer-Sphere valves have been tested to API 607 and ISO-10497-5:
2004 Positive Shaft Retention • 2-1/2” - 24” (DN 65 - 600) valves are equipped with a retaining ring at the top of the shaft to prevent movement of the top portion of the shaft past the compression ring if for any reason the shaft should break within the valve. Easy Seat Maintenance • Simply remove body insert and replace seat – disassembly of disc and shaft is not required. Excellent for both On-Off and Control Applications • Superior control characteristics. • Inherent flow characteristic is modified equal percentage. • Wide rangeability. • Tight shut-off even in control applications. •Standard lugged style valves are suitable for bidirectional dead-end service at the full pressuretemperature rating of the valve.
$735.00 MSRP $ 551.25
Qty:
add to cart
Part #:705302
Item Name :
Butterfly Valve Type
$ 149.60
Qty:
add to cart
Part #:700607
Offset Shaft and Eccentric Disc • No seat/disc contact in the open or intermediate position • Eliminates wear points at top and bottom of seats for higher cycle life • Reduces torque requirements, allowing for smaller operators Fire-Tested Version Available • Fire-Tite® Wafer-Sphere valves have been tested to API 607 and ISO-10497-5:
2004 Positive Shaft Retention • 2-1/2” - 24” (DN 65 - 600) valves are equipped with a retaining ring at the top of the shaft to prevent movement of the top portion of the shaft past the compression ring if for any reason the shaft should break within the valve. Easy Seat Maintenance • Simply remove body insert and replace seat – disassembly of disc and shaft is not required. Excellent for both On-Off and Control Applications • Superior control characteristics. • Inherent flow characteristic is modified equal percentage. • Wide rangeability. • Tight shut-off even in control applications. •Standard lugged style valves are suitable for bidirectional dead-end service at the full pressuretemperature rating of the valve.
$895.00 MSRP $ 671.25
Qty:
add to cart
Part #:702265
Offset Shaft and Eccentric Disc • No seat/disc contact in the open or intermediate position • Eliminates wear points at top and bottom of seats for higher cycle life • Reduces torque requirements, allowing for smaller operators Fire-Tested Version Available • Fire-Tite® Wafer-Sphere valves have been tested to API 607 and ISO-10497-5:
2004 Positive Shaft Retention • 2-1/2” - 24” (DN 65 - 600) valves are equipped with a retaining ring at the top of the shaft to prevent movement of the top portion of the shaft past the compression ring if for any reason the shaft should break within the valve. Easy Seat Maintenance • Simply remove body insert and replace seat – disassembly of disc and shaft is not required. Excellent for both On-Off and Control Applications • Superior control characteristics. • Inherent flow characteristic is modified equal percentage. • Wide rangeability. • Tight shut-off even in control applications. •Standard lugged style valves are suitable for bidirectional dead-end service at the full pressuretemperature rating of the valve.
$2,064.00 MSRP $ 1,548.00
Qty:
add to cart
Part #:705124
Offset Shaft and Eccentric Disc • No seat/disc contact in the open or intermediate position • Eliminates wear points at top and bottom of seats for higher cycle life • Reduces torque requirements, allowing for smaller operators Fire-Tested Version Available • Fire-Tite® Wafer-Sphere valves have been tested to API 607 and ISO-10497-5:
2004 Positive Shaft Retention • 2-1/2” - 24” (DN 65 - 600) valves are equipped with a retaining ring at the top of the shaft to prevent movement of the top portion of the shaft past the compression ring if for any reason the shaft should break within the valve. Easy Seat Maintenance • Simply remove body insert and replace seat – disassembly of disc and shaft is not required. Excellent for both On-Off and Control Applications • Superior control characteristics. • Inherent flow characteristic is modified equal percentage. • Wide rangeability. • Tight shut-off even in control applications. •Standard lugged style valves are suitable for bidirectional dead-end service at the full pressuretemperature rating of the valve.
$1,722.00 MSRP $ 1,291.50
Qty:
add to cart
Part #:705427
ABZ 397-815 Ductile Iron Locking Lever Handle Lug Style Resilient Seated General Purpose Butterfly Valve, 8 IN
$ 435.00
Qty:
add to cart
Part #:709245
Offset Shaft and Eccentric Disc • No seat/disc contact in the open or intermediate position • Eliminates wear points at top and bottom of seats for higher cycle life • Reduces torque requirements, allowing for smaller operators Fire-Tested Version Available • Fire-Tite® Wafer-Sphere valves have been tested to API 607 and ISO-10497-5:
2004 Positive Shaft Retention • 2-1/2” - 24” (DN 65 - 600) valves are equipped with a retaining ring at the top of the shaft to prevent movement of the top portion of the shaft past the compression ring if for any reason the shaft should break within the valve. Easy Seat Maintenance • Simply remove body insert and replace seat – disassembly of disc and shaft is not required. Excellent for both On-Off and Control Applications • Superior control characteristics. • Inherent flow characteristic is modified equal percentage. • Wide rangeability. • Tight shut-off even in control applications. •Standard lugged style valves are suitable for bidirectional dead-end service at the full pressuretemperature rating of the valve.
$1,155.00 MSRP $ 866.25
Qty:
add to cart
Part #:709246
Offset Shaft and Eccentric Disc • No seat/disc contact in the open or intermediate position • Eliminates wear points at top and bottom of seats for higher cycle life • Reduces torque requirements, allowing for smaller operators Fire-Tested Version Available • Fire-Tite® Wafer-Sphere valves have been tested to API 607 and ISO-10497-5:
2004 Positive Shaft Retention • 2-1/2” - 24” (DN 65 - 600) valves are equipped with a retaining ring at the top of the shaft to prevent movement of the top portion of the shaft past the compression ring if for any reason the shaft should break within the valve. Easy Seat Maintenance • Simply remove body insert and replace seat – disassembly of disc and shaft is not required. Excellent for both On-Off and Control Applications • Superior control characteristics. • Inherent flow characteristic is modified equal percentage. • Wide rangeability. • Tight shut-off even in control applications. •Standard lugged style valves are suitable for bidirectional dead-end service at the full pressuretemperature rating of the valve.
$1,383.00 MSRP $ 1,037.25
Qty:
add to cart
Part #:709247
Offset Shaft and Eccentric Disc • No seat/disc contact in the open or intermediate position • Eliminates wear points at top and bottom of seats for higher cycle life • Reduces torque requirements, allowing for smaller operators Fire-Tested Version Available • Fire-Tite® Wafer-Sphere valves have been tested to API 607 and ISO-10497-5:
2004 Positive Shaft Retention • 2-1/2” - 24” (DN 65 - 600) valves are equipped with a retaining ring at the top of the shaft to prevent movement of the top portion of the shaft past the compression ring if for any reason the shaft should break within the valve. Easy Seat Maintenance • Simply remove body insert and replace seat – disassembly of disc and shaft is not required. Excellent for both On-Off and Control Applications • Superior control characteristics. • Inherent flow characteristic is modified equal percentage. • Wide rangeability. • Tight shut-off even in control applications. •Standard lugged style valves are suitable for bidirectional dead-end service at the full pressuretemperature rating of the valve.
$1,423.00 MSRP $ 1,067.25
Qty:
add to cart
Part #:709835
ABZ 397-815 Ductile Iron Locking Lever Handle Lug Style Resilient Seated General Purpose Butterfly Valve, 2 IN
$ 117.00
Qty:
add to cart
Part #:709836
ABZ 397-815 Ductile Iron Locking Lever Handle Lug Style Resilient Seated General Purpose Butterfly Valve, 4 IN
$ 200.00
Qty:
add to cart
Part #:709244
Offset Shaft and Eccentric Disc • No seat/disc contact in the open or intermediate position • Eliminates wear points at top and bottom of seats for higher cycle life • Reduces torque requirements, allowing for smaller operators Fire-Tested Version Available • Fire-Tite® Wafer-Sphere valves have been tested to API 607 and ISO-10497-5:
2004 Positive Shaft Retention • 2-1/2” - 24” (DN 65 - 600) valves are equipped with a retaining ring at the top of the shaft to prevent movement of the top portion of the shaft past the compression ring if for any reason the shaft should break within the valve. Easy Seat Maintenance • Simply remove body insert and replace seat – disassembly of disc and shaft is not required. Excellent for both On-Off and Control Applications • Superior control characteristics. • Inherent flow characteristic is modified equal percentage. • Wide rangeability. • Tight shut-off even in control applications. •Standard lugged style valves are suitable for bidirectional dead-end service at the full pressuretemperature rating of the valve.
$1,191.00 MSRP $ 893.25
Qty:
add to cart
Part #:709243
Offset Shaft and Eccentric Disc • No seat/disc contact in the open or intermediate position • Eliminates wear points at top and bottom of seats for higher cycle life • Reduces torque requirements, allowing for smaller operators Fire-Tested Version Available • Fire-Tite® Wafer-Sphere valves have been tested to API 607 and ISO-10497-5:
2004 Positive Shaft Retention • 2-1/2” - 24” (DN 65 - 600) valves are equipped with a retaining ring at the top of the shaft to prevent movement of the top portion of the shaft past the compression ring if for any reason the shaft should break within the valve. Easy Seat Maintenance • Simply remove body insert and replace seat – disassembly of disc and shaft is not required. Excellent for both On-Off and Control Applications • Superior control characteristics. • Inherent flow characteristic is modified equal percentage. • Wide rangeability. • Tight shut-off even in control applications. •Standard lugged style valves are suitable for bidirectional dead-end service at the full pressuretemperature rating of the valve.
$972.00 MSRP $ 729.00
Qty:
add to cart
Part #:700542
ABZ 396-815 Class 150 Ductile Iron Bare Stem Wafer Style Resilient Seated General Purpose Butterfly Valve, 4in All bodies are machined to high tolerances for guaranteed dimensions Series of snap rings and washers hold the stem, bushing and packing in and acts as a blowout-proof engagement Top bushings protects the stem from side thrust of operators and they are made of impact and corrosion resistant material Special double v-shape of stem seal self-adjusts to protect the stem area for either vacuum or pressure use Long neck allows for insulation requirements Disc edge is individually processed through machining and hand buffing for a smooth edge, providing a bubble tight shut-off and maximum seat life Stem and body are isolated from line media by the interference fit of the primary seal created between the disc and seat Silicone free 1-piece body ApplicationFor industrial, HVAC, oil patch and agricultural services
$518.40 MSRP $ 169.00
Qty:
add to cart
$931.00 MSRP $ 580.00
Qty:
add to cart
 
Displaying: 1 - 24 of 24 Matching Items