17 Quart
1/4in
View:
Active Filters :
Part #:502787
- Brute Vented Trash Receptacle, Round, 44 gal, Gray
Rounded handles make lifting and moving easier, and are reinforced to resist tearing or damage from even the heaviest loads.
Reinforced base is specifically engineered to be dragged over rough surfaces, extending life and overall durability even in the toughest environments.
Colors complement your facility's recycling, sortation, and organization needs.
Seamless construction makes cleaning the container easier.
Stackable design enables nesting for easy transport and storage.
Qty:
Part #:501644
- Double Utility Pail, 17qt, Gray
RCP2617GRA
Be the first to write a review
Double pail allows you to separate cleaning solution from your rinse water.
Molded-in graduations.
Wide pour spout.
Durable, molded plastic.
$
50.83
Qty:
Part #:502796
- Vented Round BRUTE Lid, 24.5 dia x 1.5h, Gray
RCP264560GY
Snap-lock ensures a secure fit.
Ridges enable stacking of BRUTE® containers to providing a space-efficient storage solution.
Meets NSF 2, 21 approval and is USDA Meat and Poultry Group listed, ensuring regulatory compliance for food storage and cleanability.
Proprietary design constructed with the highest-quality materials plus a UV inhibitor ensures long life in even the most extreme commercial environments. Guaranteed to never fade, warp, crack, or crush.
$
37.79
Qty:
Part #:334-1094U5604
- Polyurethane - 95 Durometer Blue Tubing Attributes
Tube OD
1/4"
Weight
2.08 lb
Material
Polyurethane
Tube ID
.160"
Working Pressure
148 PSI at 75°F (24°C)
Wall Thickness
.045
Temperature Range
-40°F to 165°F (-40°C to 74°C)
Length
100' roll
$
77.10
Qty:
Part #:1267-102-SAS
- Additional InformationThey feature all 316 stainless steel construction, and are standard with 1/2" NPT male process - 1/2" NPT female instrument connections. Also available with 1/4" NPT connections.
Qty:
Part #:1267-20-120-100-PSI/KPA
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
Qty:
Part #:1267-20-120-100-PSI/KPA-GL
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.NoteA steel, stainless or chrome case & cover ring must be additionally ordered when lenses other than acrylic are utilized on all 100 Series models.
Qty:
Part #:1267-20-120-1000-PSI/KPA
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
Qty:
Part #:1267-20-120-15-PSI/KPA
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
Qty:
Part #:1267-20-120-160-PSI/KPA
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
Qty:
Part #:1267-20-120-160-PSI/KPA-GL
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.NoteA steel, stainless or chrome case & cover ring must be additionally ordered when lenses other than acrylic are utilized on all 100 Series models.
Qty:
Part #:1267-20-120-200-PSI/KPA
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
Qty:
Part #:1267-20-120-30-PSI/KPA
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
Qty:
Part #:1267-20-120-30-PSI/KPA-GL
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.NoteA steel, stainless or chrome case & cover ring must be additionally ordered when lenses other than acrylic are utilized on all 100 Series models.
Qty:
Part #:1267-20-120-30-VAC/KPA
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
Qty:
Part #:1267-20-120-300-PSI/KPA
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
Qty:
Part #:1267-20-120-300-PSI/KPA-BP3
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
Qty:
Part #:1267-20-120-60-PSI/KPA
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
Qty:
Part #:1267-20-120-60-PSI/KPA-GL
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.NoteA steel, stainless or chrome case & cover ring must be additionally ordered when lenses other than acrylic are utilized on all 100 Series models.
Qty:
Part #:1267-25-120-100-PSI/KPA
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
Qty:
Part #:1267-25-120-15-PSI/KPA
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
Qty:
Part #:1267-25-120-1500-PSI/KPA
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
Qty:
Part #:1267-25-120-160-PSI/KPA
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
Qty:
Displaying: 1 - 24 of 40 Matching Items