12ft x 16ft
3in
View:
Active Filters :
- Size: 3in 12ft x 16ft 17 Quart 24in x 36in 55 Gallon
- Material: Cast Iron Ductile Iron Plastic Poly/Plastic Polyurethane PVC
Part #:710052
- DWV PVC (Drain, Waste, and Vent Polyvinyl Chloride) pipe. DWV pipe is similar to Schedule 40 PVC pipe in many ways but unlike Schedule 40 pipe, DWV pipe is not intended to contain any pressure. The drain, waste, and vent applications of DWV PVC pipe is limited to situations where the entire flow is generated by gravity, with no required pressure containment.
$
2.90
Qty:
Part #:200443
- Empire® Level Safety Barricade TapesProduct DetailsSafety tapes indicating warning or danger areasLarge bold lettering is easy to read at a distanceDurable plastic material remains pliant in cold weather
Qty:
Part #:301354
- CANTEX 6141630 is a 3 in. Schedule 40 Standard Center Stop Coupling used to join lengths of conduit pipe together with two solvent weld socket ends
Features
For use with Schedule 40 and Schedule 80 conduit. May also be used in EB & DB Duct applications.
Center stop to help determine proper depth of connection
For use aboveground and underground and non-conductive and sunlight resistant
Meets NEMA TC-3 Standards
UL and CSA listed
Made in USA
$
1.43
Qty:
Part #:502353
- All-Purpose Blue Poly Tarp
Tear and UV resistant mold and mildew resistant will not rot nor shrink.
Ideal for camping, hunting, tent fly, storage cover, canopy, boat cover, woodpile cover.
CORNERS AND GROMMETS
Rust-Proof Aluminum Grommetsevery 3 ft and on each corner.
OUTER EDGE All edges heat-sealed and reinforcedwith polyethylene rope.
CROSS WEAVE Polyethylene yarn woven for durability.
RAIN AND UV PROTECTION Water proof and UV resistant.
COLOR BLUE
$
14.81
Qty:
Part #:700625
- DWV PVC (Drain, Waste, and Vent Polyvinyl Chloride) pipe. DWV pipe is similar to Schedule 40 PVC pipe in many ways but unlike Schedule 40 pipe, DWV pipe is not intended to contain any pressure. The drain, waste, and vent applications of DWV PVC pipe is limited to situations where the entire flow is generated by gravity, with no required pressure containment.
$
3.80
Qty:
Part #:411-SF403GN
- Features and Advantages
&bull Sizes 3"-12" are Underwriters Laboratories Inc. Listed at 200 PSI for 3"-8" sizes and 175 PSI for 10"-12" sizes.For use on PC350 ductile iron and SCH40 steel pipe.&bull Bolt hole drilling is to ANSI B16.1 class 125.&bull Uses standard mechanical joint gasket for seal on DI Pipe and Transition Gasket on steel pipe.&bull Pipe fabrication can be done on site, using plain end pipe.&bull Flange Adapters are ideal for jobs involving retro-fitting.&bull Can be used on Ductile Iron (3"-36") and Steel (3"-12") Pipe -- steel pipe sizes require a transition gasket.&bull Can be used in above or below ground applications&bull If future maintenance is required, Flange Adapters can be easily disassembled.
Qty:
Qty:
Qty:
Part #:301267
- Priced Per Ft, Sold in 10ft Lengths
Qty:
Part #:301413
- CANTEX 5133829 is a 2-1/2 in. x 90-Degree Plain End Schedule 40 Standard Radius Elbow used to change the direction of a conduit run by 90-Degree
Features
Schedule 40 Nonmetallic PVC construction for strength and durability
For indoor or outdoor use
Suitable for aboveground or buried
Plain-end connections are solvent weld
ETL listed Conforms to UL 651 and NEMA TC-3 Conforms to UL 651 and NEMA TC-3
Made in USA
$
12.63
Qty:
Part #:334-GIBFV300
- Grooved End Iron Butterfly Valve Attributes
Weight
9.75 lb
Size
3"
Material
Ductile Iron
Seal
EPDM
Working Pressure
300 PSI
Maximum Temperature
210°F (99°C)
$
339.20
Qty:
Part #:501644
- Double Utility Pail, 17qt, Gray
RCP2617GRA
Be the first to write a review
Double pail allows you to separate cleaning solution from your rinse water.
Molded-in graduations.
Wide pour spout.
Durable, molded plastic.
$
50.83
Qty:
Part #:502744
- Round Flat Top Lid, for 55 gal Round BRUTE Containers, 26.75" diameter, Gray
RCP265400GY
Snap-lock ensures a secure fit.
Ridges enable stacking of BRUTE® containers to providing a space-efficient storage solution.
Meets NSF 2, 21 approval and is USDA Meat and Poultry Group listed, ensuring regulatory compliance for food storage and cleanability.
Proprietary design constructed with the highest-quality materials plus a UV inhibitor ensures long life in even the most extreme commercial environments. Guaranteed to never fade, warp, crack, or crush.
$
56.20
Qty:
Part #:502757
- Impact 7755-3 Gator 55-Gallon Gray Plastic Garbage Can &ndash Heavy-Duty, High-Capacity Waste Management Solution
Upgrade your waste management system with the Impact 7755-3 Gator 55-Gallon Gray Plastic Garbage Can, designed to meet the highest durability and efficiency standards. Whether used in commercial, industrial, or high-traffic environments, this heavy-duty container delivers superior performance while offering a cost-effective replacement for the Rubbermaid Brute 2655 (RCP265500GY).
Key Features & Benefits
Effortless Liner Removal &ndash Up to 75% Force ReductionSix strategically placed air-venting passages significantly reduce the suction effect when lifting out filled liners. This innovative design minimizes strain and effort, making trash removal safer and more efficient for workers.
Secure Liners in Place with Built-in Poly Bag CinchesNo more shifting or slipping trash bags! The integrated poly bag cinches keep liners securely in place, eliminating the need for messy knots and improving overall efficiency.
Improved Handling with Ergonomic Grip DesignDesigned for user convenience, this container features deep, wide bottom hand grip pockets for easier lifting and dumping. The offset ridge design also prevents nesting jams, making storage and transport hassle-free.
Durable & Long-Lasting ConstructionBuilt from high-quality, impact-resistant plastic, the Impact 7755-3 Gator trash can withstands tough working conditions, including heavy loads, harsh weather, and frequent use. The reinforced base enhances stability and extends the container&rsquos lifespan.
Seamless Replacement for Rubbermaid Brute 2655This Gator 55-gallon container is a direct replacement for the Rubbermaid 2655 Brute (RCP265500GY), offering comparable durability and performance at an excellent value.
Ideal for Various Applications
Commercial Facilities &ndash Office buildings, retail stores, and warehouses
Industrial & Manufacturing &ndash Factories, workshops, and construction sites
Hospitality & Food Service &ndash Restaurants, hotels, and cafeterias
Public & Outdoor Spaces &ndash Parks, stadiums, and municipal waste collection
Note Lid sold separately. Compatible lids are available for added containment and odor control.
Upgrade to the Impact 7755-3 Gator 55-Gallon Trash Can today for a durable, efficient, and cost-effective waste management solution!
Qty:
Part #:502782
- Heavy-Duty Utility Cart, Two-Shelf, 25.9w x 45.2d x 32.2h, Beige
RCP452088BG
The Rubbermaid Commercial Utility Cart with Lipped Shelf is perfect for transporting materials, supplies, and heavy loads in almost any environment.
Ergonomic push handle provides optimum control.
Molded-in storage compartments, holsters, hooks, and notches.
Molded-in customizable fittings.
High density structural resin construction.
Easy-access bottom shelf
$
402.18
Qty:
Qty:
Qty:
Part #:334-L03
- Grooved Lightweight Flexible Coupling- Series L, Style 10 Attributes
Maximum Operating Pressure
300 PSI at 70°F (21°C)
Weight
2.57 lb
Material
Ductile Iron
Seal
EPDM
Nominal Size
3"
Pipe OD
3.50"
$
18.32
Qty:
Part #:100452
- The PVC Barbed-Insert Fitting of Choice. Engineered to provide positive grip and ease of
installation. High quality and reliability have made
Spears insert fi ttings the preferred choice for
irrigation and O.E.M. applications. A wide variety of
PVC insert confi gurations and adapters are available
for use with polyethylene pipe sizes 1/2" through 4",
plus 6" & 8" Couplings and Adapters for lay-fl at type
irrigation hose. Special 3/8" barbed confi gurations in
PVC and PP allow clamp-free connection to 1/2" I.D.
polyethylene irrigation hose.
Qty:
closeout
$31.40 MSRP
$
21.15
Qty:
Armstrong 250MS12 3in SW 1-7/8in Orifice Cast Iron Float & Thermostatic, Same Side Connection D17210
- Float and Thermostatic (F&T) Steam TrapsThe More Your Steam Pressure Varies, The More You Need Armstrong F&T TrapsWhen steam pressure may vary from maximum steam supply pressure to vacuum, Armstrong F&Ts are your most energy-efficient choice. Our line of F&Ts brings Armstrong performance, dependability and long life to trapping services requiring continuous drainage with high air venting capacity. Thanks to separate orifices for condensate and air, they provide continuous condensate drainage and air venting-even under conditions of zero pressure.
All the benefits detailed here have been designed into Armstrong F&Ts through long experience in the manufacture of pressure float-type traps. They assure you of optimum operating efficiency for long periods with minimum trouble.
How they work
Float and thermostatic traps are mechanical units that operate on both density and temperature principles. The float valve operates on the density principle. A level connects the ball float to the valve and seat. Once condensate reaches a certain level in the trap, the float rises, opening the orifice and draining condensate. A water seal formed by the condensate prevents live steam loss.
Since the discharge valve is under water, it is not capable of venting air and non-condensables. When the accumulation of air and con-condensable gases causes a significant temperature drop, a thermostatic air vent in the top of the trap discharges them. The thermostatic vent opens at a temperature a few degrees below saturation, so it's able to handle a large volume of air-through an entirely separate orifice-but at a slightly reduced temperature.
Built as tough as the jobs they do
Armstrong float and thermostatic traps are unique in their super heavy duty construction. Armstrong uses high quality ASTM A48 Class 30 cast iron or ASTM A216 WCB cast steel-normally found in pressure vessels rated to 250 psi (17 bar) or 465 psi (32 bar). Internal mechanisms are made from stainless steel and are heavily reinforced. No brass cotter pins here. Valves and seats are stainless steel, hardened, ground and lapped to withstand the erosive forces of flashing condensate.
Why go to all this trouble for traps normally recommended for low-pressure, modulating service? The operative word here is modulating. Modulating pressures mean widely varying loads, thermal cycling and high air and non-condensable gas loads.
In other words tough service. Inferior, lightweight construction in this kind of service is a mistake waiting to happen. Trap failures on modulating pressure may lead to water hammer, corrosion and even damage to heat exchangers.
Armstrong's published capacities are based on actual measurements of traps handling hot, flashing condensate. Competitive F&Ts may utilize theoretical calculated capacities. Armstrong uses its own steam lab to give you actual capacity-especially important on high-capacity traps such as those in our ultra-capacity line. Not only does Armstrong offer super heavy duty construction for long life and reliability, but we also supply the data to back up performance. Here's a simple, easy-to-remember summary The more your pressure varies, the more you need Armstrong F&Ts.
Qty:
Part #:501-D25977
- DS Series In-Line Condensate SeparatorsDuctile Iron Drain SeparatorCondensate in steam and air piping reduces thermal efficiency, causes water hammer, corrodes equipment such as valves and pipes, and causes other problems.
In-line (drain) separators DS-1, DS-2, DS-3, and DS-4 separate condensate efficiently by using the centrifugal force of steam or air created by introducing it into a specifically shaped path. Because of the simple structure of the drain separators, pressure loss is minimized, enabling clean, dry steam or air to be fed to equipment.
When steam or air flow enters the drain separator, centrifugal force is generated in the fluid because of the devices internal structural design. The fluid drains along the wall because of the difference in specific gravity with steam or air, eventually striking the baffle. The baffle guides the fluid to the drain outlet and to the trap, which drains it. As a result, small dirt particles and condensate are separated and removed from the system through the bottom drain.
• Cyclone structure maximizes liquid separation efficiency
• Pressure loss is extremely low
• No moving parts means no breakdowns
Qty:
Part #:501-D25978
- DS Series In-Line Condensate SeparatorsDuctile Iron Drain SeparatorCondensate in steam and air piping reduces thermal efficiency, causes water hammer, corrodes equipment such as valves and pipes, and causes other problems.
In-line (drain) separators DS-1, DS-2, DS-3, and DS-4 separate condensate efficiently by using the centrifugal force of steam or air created by introducing it into a specifically shaped path. Because of the simple structure of the drain separators, pressure loss is minimized, enabling clean, dry steam or air to be fed to equipment.
When steam or air flow enters the drain separator, centrifugal force is generated in the fluid because of the devices internal structural design. The fluid drains along the wall because of the difference in specific gravity with steam or air, eventually striking the baffle. The baffle guides the fluid to the drain outlet and to the trap, which drains it. As a result, small dirt particles and condensate are separated and removed from the system through the bottom drain.
• Cyclone structure maximizes liquid separation efficiency
• Pressure loss is extremely low
• No moving parts means no breakdowns
Qty:
Displaying: 1 - 24 of 39 Matching Items