12ft x 12ft
3/4in
View:
Active Filters :
- Size: 3/4in 12ft x 12ft 17 Quart 32oz
- Material: Cast Iron Ductile Iron Malleable Iron Nylon Plastic Poly/Plastic PVC 40 PVC DWV
Part #:307321
- Appleton offers beam clamps straps clamps and clamp backs for rigid metal conduit or imc. Beam clamps provide support for conduit hanging systems. Two-hole straps are used to support rigid metal conduit and IMC. Clamp backs provide spacing from mounting surfaces when they are used with pipe clamps.
Qty:
Part #:308290
- Appleton Form 35 Malleable Iron Conduit Outlet Bodies Covers and Gaskets are used to connect and change direction of conduit runs. In addition to making bends in a conduit system they allow connections for branch runs. These conduit bodies serve as pulling fittings and permit access to conductors for splicing and maintenance.
Qty:
Part #:308314
- Appleton Form 35 Malleable Iron Conduit Outlet Bodies Covers and Gaskets are used to connect and change direction of conduit runs. In addition to making bends in a conduit system they allow connections for branch runs. These conduit bodies serve as pulling fittings and permit access to conductors for splicing and maintenance.
Qty:
Part #:308350
- Appleton Form 35 Malleable Iron Conduit Outlet Bodies Covers and Gaskets are used to connect and change direction of conduit runs. In addition to making bends in a conduit system they allow connections for branch runs. These conduit bodies serve as pulling fittings and permit access to conductors for splicing and maintenance.
Qty:
Part #:308374
- Appleton Form 35 Malleable Iron Conduit Outlet Bodies Covers and Gaskets are used to connect and change direction of conduit runs. In addition to making bends in a conduit system they allow connections for branch runs. These conduit bodies serve as pulling fittings and permit access to conductors for splicing and maintenance.
Qty:
Part #:308391
- Appleton Form 35 Malleable Iron Conduit Outlet Bodies Covers and Gaskets are used to connect and change direction of conduit runs. In addition to making bends in a conduit system they allow connections for branch runs. These conduit bodies serve as pulling fittings and permit access to conductors for splicing and maintenance.
Qty:
Part #:501624
- All-Purpose Blue Poly Tarp
Tear and UV resistant mold and mildew resistant will not rot nor shrink.
Ideal for camping, hunting, tent fly, storage cover, canopy, boat cover, woodpile cover.
CORNERS AND GROMMETS
Rust-Proof Aluminum Grommetsevery 3 ft and on each corner.
OUTER EDGE All edges heat-sealed and reinforcedwith polyethylene rope.
CROSS WEAVE Polyethylene yarn woven for durability.
RAIN AND UV PROTECTION Water proof and UV resistant.
COLOR BLUE
$
10.94
Qty:
Part #:810167
- Country of Origin MX:
$
51.73
Qty:
Part #:308336
- Appleton Form 35 Malleable Iron Conduit Outlet Bodies Covers and Gaskets are used to connect and change direction of conduit runs. In addition to making bends in a conduit system they allow connections for branch runs. These conduit bodies serve as pulling fittings and permit access to conductors for splicing and maintenance.
Qty:
$
1.36
Qty:
Qty:
Part #:204272
- Plastic CTS Insert Stiffener 0.66" OD
Qty:
Part #:306964
- Appleton and O-Z/Gedney conduit bushings are used with a locknut to terminate rigid metal conduit or IMC conduit to a box or enclosure. They provide a smooth pulling surface for wires.
Qty:
Part #:308397
- Appleton Form 35 Malleable Iron Conduit Outlet Bodies Covers and Gaskets are used to connect and change direction of conduit runs. In addition to making bends in a conduit system they allow connections for branch runs. These conduit bodies serve as pulling fittings and permit access to conductors for splicing and maintenance.
Qty:
Part #:501644
- Double Utility Pail, 17qt, Gray
RCP2617GRA
Be the first to write a review
Double pail allows you to separate cleaning solution from your rinse water.
Molded-in graduations.
Wide pour spout.
Durable, molded plastic.
$
50.83
Qty:
Qty:
Part #:704656
- Designed to simplify, streamline and secure a wide range of industry piping and conduit systems.
Hangerlok was developed to bring greater performance to construction, OEM, design projects and the engineering community.
Having the marketing and engineering knowledge of decades in these markets, the people who brought you the first thermoplastic support hanger, developed Hangerlok to improve function and performance driven application needs.
Using experienced designers, Solidworks engineers, independent testing parties to provide substantial data and improved design, Hangerlok was created.
Improved materials offer improved performance and broader application opportunities. Using a Nylon 6/ 6 polymer, Hangerlok can be used inside facilities and also exposed areas. Using both a UV inhibitor and a flame retardant, Hangerlok is durable and halogen free. It is by far the best material for this product type.
Being UV resistant along with it&rsquos non-conductive qualities, Hangerlok&rsquos versatility makes it a must have one piece pipe hanger and conduit support system.
Over the years of selling the original auto-locking support and hanger, materials changed that did not meet market demands and certain applications. There needed to be a better product and Hangerlok met that need.
$
0.86
Qty:
Qty:
Part #:713370
- Y-Type Cast Iron Strainers
250 lb Screwed 1/2"-3" Class 125 Flanged 2"-6" Class 250 Flanged 2"-6"
Screen chambers won't leak or crush
Both ends of the chambers are precisely machined. This means perfectly round and smooth seating surfaces, as well as a fixed chamber length. Since the screen seats snugly on the machined surface, no particle bigger than the screen opening can escape around the end of the screen.
Screwed retainers easy in, easy out
Straight threads mean it takes less torque to achieve a tight seal with proper gasket compression. Less torque is also required to remove the retainer. For you, that means less danger of "freezing in" than with hard-to-break tapered pipe threads.
Off-center blowdown connections for better dirt removal
Off-center drains on 2-1/2" and 3" strainers allow you to remove liquid and dirt nearly completely when blowing down the strainer. Also, less liquid will spill when the screen retainer is removed.
Many screen choices
Many screen materials, meshes and perforations are available
Qty:
Part #:302510
- Ductile Iron Bender Head - 3/4" EMT, 1/2" Rigid & 1/2" IMC
IDEAL® Iron conduit bender head with handle has ductile iron construction for exceptional durability and rugged construction that withstands a lifetime of heavy use. Baked-on blue enamel finish on the handle resists corrosion and enhances visibility. Bends conduit pipes to fit around any corner, ceiling, wall or irregularly shaped passageways. It features precision marks locating degree scale, star, arrow and rim notch for perfect bends every time. Bender head has easy visibility markings that are raised and cast into both sides. It has a deeply serrated steps and grooved internal hook surface that prevents slippage, while applying high leverage. It is heat treated for extra strength and reinforced at stress points for longer life. Uses the Benfield bending system, which is standard to the industry, resulting in accurate and dependable bends. Includes convenient bending guide as a reference for basic bends. Four sizes provided to accommodates four sizes of pipe. Available complete with head and handle both included, as well as the handle and head each sold separately as a replacement part.
Withstands a lifetime of heavy use
Exceptional, durable, materials for extra strength, and reinforced at stress points for longer life
Ductile iron material is stronger than malleable iron or aluminum
$
83.98
Qty:
Part #:704662
- Designed to simplify, streamline and secure a wide range of industry piping and conduit systems.
Hangerlok was developed to bring greater performance to construction, OEM, design projects and the engineering community.
Having the marketing and engineering knowledge of decades in these markets, the people who brought you the first thermoplastic support hanger, developed Hangerlok to improve function and performance driven application needs.
Using experienced designers, Solidworks engineers, independent testing parties to provide substantial data and improved design, Hangerlok was created.
Improved materials offer improved performance and broader application opportunities. Using a Nylon 6/ 6 polymer, Hangerlok can be used inside facilities and also exposed areas. Using both a UV inhibitor and a flame retardant, Hangerlok is durable and halogen free. It is by far the best material for this product type.
Being UV resistant along with it&rsquos non-conductive qualities, Hangerlok&rsquos versatility makes it a must have one piece pipe hanger and conduit support system.
Over the years of selling the original auto-locking support and hanger, materials changed that did not meet market demands and certain applications. There needed to be a better product and Hangerlok met that need.
$
1.09
Qty:
Qty:
Qty:
Qty:
Displaying: 1 - 24 of 145 Matching Items