Anchor
3M
View:
Active Filters :
Part #:810222
- 1/2" Drive SAE 5/8" Standard Length Hex Bit Socket
&bull High-polished chrome finish socket cleans easily
&bull Two piece design allows bits to be replaced easily
Qty:
Qty:
Part #:503703
- 5/8" Shank Diameter Eyebolts Shoulder Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially. A steel washer or spacer may be required for proper seating
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
Part #:501590
- 1/2" Drive SAE 5/8" Long Hex Bit Socket
&bull High-polished chrome finish socket cleans easily
&bull Two piece design allows bits to be replaced easily
Qty:
Part #:501956
- 6 1/2" Cold Chisels
The most commonly used chisels in the chisel line
For cutting, shaping and removing metal softer than the cutting edge of the chisel
Qty:
Part #:204515
- 441 OMNI Cast Coupling - For joining plain-end pipe of same outside diameters or outside diameters within same nominal pipe size
Description Cast CouplingsApplication To join plain end pipes with the same or different O.D.s by changing followers and gaskets.Key Features&bull Heavy cast Ductile Iron parts for long life&bull Meets applicable AWWA C219 Standards&bull Flanges and gaskets can be mixed and matched on the same size nominal sleeve&bull Most couplings are stab fit, making installation a b eeze. No disassembly is required&bull Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories&bull One sleeve per nominal pipe size takes the guess work out of deciding which sleeve size to choose&bull Flanges are color coded by pipe type Red for iron pipe size O.D. Blue for Ductile O.D. and gray forAsbestos Cement O.D.&bull Gaskets and flanges a e permanently marked with a part number and range to facilitate proper selection&bull Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications
$
364.65
Qty:
Part #:200227
- 441 OMNI Cast Coupling - For joining plain-end pipe of same outside diameters or outside diameters within same nominal pipe size
Description Cast CouplingsApplication To join plain end pipes with the same or different O.D.s by changing followers and gaskets.Key Features&bull Heavy cast Ductile Iron parts for long life&bull Meets applicable AWWA C219 Standards&bull Flanges and gaskets can be mixed and matched on the same size nominal sleeve&bull Most couplings are stab fit, making installation a b eeze. No disassembly is required&bull Up to 2.4" of range with a single coupling, reducing the need for large coupling inventories&bull One sleeve per nominal pipe size takes the guess work out of deciding which sleeve size to choose&bull Flanges are color coded by pipe type Red for iron pipe size O.D. Blue for Ductile O.D. and gray forAsbestos Cement O.D.&bull Gaskets and flanges a e permanently marked with a part number and range to facilitate proper selection&bull Sleeves are available in a variety of lengths, and custom length Steel sleeves are available for special applications
$
364.65
Qty:
Part #:509570
- 5/8" Shank Diameter Eyebolts Plain Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Plain pattern eyebolts must never be used to lift an angular load
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
$
0.45
Qty:
Part #:207076
- 226 Full Circle Clamp DI Lug Single Band - For repairing complete breaks, splits, holes in pipe or joining pipe
Description These clamps provide fast, economical means for repairing full circumferential breaks,holes, cracks and other types of damage.Application Works on Cast Iron, Ductile Iron, Steel, Asbestos Cement, Copper, Aluminum, PVC, HDPE,Fiberglass and other pipe types.Key Features
&bullStainless Steel bands&bullWorking pressure up to 300 PSI
&bullNominal temperature range -20°F to 180°F
&bullRemovable lugs to allow installation in tight spaces
&bullMay be used to join plain end pipe of the same diameter
&bullStandard widths through 30"
&bull360° gasket seal&bullFlexi-Coat® Epoxy Finish for corrosion resistance
&bullRange up to .40" in single band
&bullDrop-in bolts for easier installation
$
247.10
Qty:
Part #:202751
- 226 Full Circle Clamp DI Lug Single Band - For repairing complete breaks, splits, holes in pipe or joining pipe
Description These clamps provide fast, economical means for repairing full circumferential breaks,holes, cracks and other types of damage.Application Works on Cast Iron, Ductile Iron, Steel, Asbestos Cement, Copper, Aluminum, PVC, HDPE,Fiberglass and other pipe types.Key Features
&bullStainless Steel bands&bullWorking pressure up to 300 PSI
&bullNominal temperature range -20°F to 180°F
&bullRemovable lugs to allow installation in tight spaces
&bullMay be used to join plain end pipe of the same diameter
&bullStandard widths through 30"
&bull360° gasket seal&bullFlexi-Coat® Epoxy Finish for corrosion resistance
&bullRange up to .40" in single band
&bullDrop-in bolts for easier installation
$
384.05
Qty:
Part #:207515
- 226 Full Circle Clamp DI Lug Single Band - For repairing complete breaks, splits, holes in pipe or joining pipe
Description These clamps provide fast, economical means for repairing full circumferential breaks,holes, cracks and other types of damage.Application Works on Cast Iron, Ductile Iron, Steel, Asbestos Cement, Copper, Aluminum, PVC, HDPE,Fiberglass and other pipe types.Key Features
&bullStainless Steel bands&bullWorking pressure up to 300 PSI
&bullNominal temperature range -20°F to 180°F
&bullRemovable lugs to allow installation in tight spaces
&bullMay be used to join plain end pipe of the same diameter
&bullStandard widths through 30"
&bull360° gasket seal&bullFlexi-Coat® Epoxy Finish for corrosion resistance
&bullRange up to .40" in single band
&bullDrop-in bolts for easier installation
$
252.39
Qty:
Part #:206921
- 226 Full Circle Clamp DI Lug Single Band - For repairing complete breaks, splits, holes in pipe or joining pipe
Description These clamps provide fast, economical means for repairing full circumferential breaks,holes, cracks and other types of damage.Application Works on Cast Iron, Ductile Iron, Steel, Asbestos Cement, Copper, Aluminum, PVC, HDPE,Fiberglass and other pipe types.Key Features
&bullStainless Steel bands&bullWorking pressure up to 300 PSI
&bullNominal temperature range -20°F to 180°F
&bullRemovable lugs to allow installation in tight spaces
&bullMay be used to join plain end pipe of the same diameter
&bullStandard widths through 30"
&bull360° gasket seal&bullFlexi-Coat® Epoxy Finish for corrosion resistance
&bullRange up to .40" in single band
&bullDrop-in bolts for easier installation
$
494.08
Qty:
Part #:202935
- 227 Full Circle Clamp DI Lug - Double Band - For repairing complete breaks, splits, holes in pipe or joining pipe
Description These clamps provide fast, economical means for repairing full circumferential breaks,holes, cracks and other types of damage.Application Works on Cast and Ductile Iron, Steel, Asbestos Cement, Copper, Aluminum, PVC, HDPE,Fiberglass and other pipe types.Key Features
&bullWorking pressure up to 175 PSI
&bullNominal temperature range -20°F to 180°F
&bullRemovable lugs to allow installation in tight spaces
&bullMay be used to join plain end pipe of the same diameter
&bullStandard widths through 30" (221 standard is 5")&bull360° gasket seal
&bullFlexi-Coat® Epoxy Finish for corrosion resistance
&bullRange up to .80" in double band
&bullDrop-in bolts for easier installation
$
454.38
Qty:
Part #:202263
- 227 Full Circle Clamp DI Lug - Double Band - For repairing complete breaks, splits, holes in pipe or joining pipe
Description These clamps provide fast, economical means for repairing full circumferential breaks,holes, cracks and other types of damage.Application Works on Cast and Ductile Iron, Steel, Asbestos Cement, Copper, Aluminum, PVC, HDPE,Fiberglass and other pipe types.Key Features
&bullWorking pressure up to 175 PSI
&bullNominal temperature range -20°F to 180°F
&bullRemovable lugs to allow installation in tight spaces
&bullMay be used to join plain end pipe of the same diameter
&bullStandard widths through 30" (221 standard is 5")&bull360° gasket seal
&bullFlexi-Coat® Epoxy Finish for corrosion resistance
&bullRange up to .80" in double band
&bullDrop-in bolts for easier installation
$
686.00
Qty:
Part #:203081
- 331 Repair Service Saddle, Double Bale - For repairing and restoring damaged branch connections
DescriptionDouble bale Ductile Iron repair saddle with large concentric-ribbed gasket and Carbon Steel bales.Application Pulled out or broken direct taps, stripped threads, cracked pipe or new installations wherewide gasket coverage is desired.Key Features
&bullMeets applicable AWWA C800 Standards
&bullThe wide saddle body provides stability on the pipe
&bullConcentric ribbed gasket conforms to pipe surface irregularities to assure dependable seal&bullNPT, CC and other threaded outlets available in sizes " to 2"
&bullExcellent way to repair and restore a damaged branch connection in one operation
&bullIn conjunction with the bales, a closed lug on one side acts as a hinge for easier installation
$
217.36
Qty:
Part #:811717
- 10" Combination Slip Joint Pliers
&bull Multiple parallel jaw positions are locked in to proper groove for superior non-slip performance
&bull Serrated jaws for maximum gripping power
&bull Polished heads resist rust and corrosion, extending the tool life
&bull Shear type wire cutter extends tool use
Qty:
Part #:500541
- 1/2" Drive 10" Extension
&bull Chrome plating provides increased protection from rust and corrosion
&bull Ball and spring socket retention
&bull Spinner disk is ideal for fast turn down of fasteners
Qty:
Part #:810263
- 12" Extra-Long Cold Chisels
Designed for cutting, shaping and removing metal softer than the cutting edge of the chisel
Qty:
Displaying: 1 - 24 of 42 Matching Items