Apollo
Aerokroil
View:
Active Filters :
Part #:701042
- 3/8in Jamesbury 9F Series/Eliminator 2000 Fire-Tite Threaded Ball Valve. Carbon steel body with stainless steel ball and stem. Jamesbury Xtreme seats with TFM seals. Non-ANSI Class Jamesbury Part # MA00060389FB2236XTB
Qty:
Part #:701896
- 3/8in Jamesbury 5H Value-Line Series High Pressure Threaded Ball Valve. Carbon steel body with stainless steel ball and 17-4PH stem. Seats are Acetal Homopolymer with PTFE seals. Jamesbury Part # MA0010763 5H22HBRT
Qty:
Part #:702783
- 3/8in Jamesbury 3000 Series Fire-Tite Threaded Ball Valve. Carbon steel body with stainless steel ball. Acetal seats with graphite seal. Jamesbury Part # MA0010768332236RLC
Qty:
Part #:709473
- Ball Valves
Subcategory
Brass & Bronze
Series Type
2 (Two) Piece
Threaded, 2-Piece, Std. Port, Bronze Ball Valve, 600 CWP, Sizes 1/4" to 4" (DN 8 to DN 100)
Qty:
Part #:700295
- Male NPTF x Hose Barb Attributes
Weight
0.061 lb
Material
Brass
Male Thread
NPTF
Length
1.76"
Hose ID
3/8"
Hex
11/16"
Male Thread Size
3/8"
$
2.17
Qty:
Qty:
Part #:508066
- Proto 1/2" Drive Hex Bit Impact Socket 3/8"
Features and Benefits
Proto® Hex Bit Impact Sockets can be used on stubborn fasteners.
Tight tolerances for snug fit on fastener.
Hex bit impact sockets are used wherever powered drive tools are used to install or remove fasteners.
Hex bit impact sockets are designed to withstand the high torque and force associated with impact tools in repetitive application.
Side locking hole.
Qty:
Part #:810217
- 1/2" Drive SAE 3/8" Standard Length Hex Bit Socket
&bull High-polished chrome finish socket cleans easily
&bull Two piece design allows bits to be replaced easily
Qty:
Part #:702874
- Barbed Hose Mender Attributes
Weight
0.0405 lb
Material
Brass
Length
2.06"
Hose ID
3/8"
$
1.71
Qty:
Part #:503700
- 3/8" Shank Diameter Eyebolts Shoulder Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially. A steel washer or spacer may be required for proper seating
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
Part #:100150
- Clear PVC Tubing Attributes
Tube OD
1/2"
Weight
5.95 lb
Material
PVC
Tube ID
3/8"
Color
Clear
Working Pressure
70 PSI @70°F
Length
100'
Maximum Temperature
175°F (79.4°C)
$
0.65
Qty:
Part #:701177
- 3/8in Jamesbury 9F Series/Eliminator 2000 Fire-Tite Threaded Stainless Steel Ball Valve. Stainless steel body with stainless steel ball and stem. Jamesbury Xtreme seats with TFM seals. Non-ANSI Class Jamesbury Part # MA00060429FB3600XTB
Qty:
Part #:702801
- 3/8in Jamesbury Clincher Series 2000 2-Piece Threaded Ball Valve. Brass body with brass ball and stem. Seats and seals are PTFE. Assembled dry, no silicone. Jamesbury Part # MA0010758 211100TTC061
Qty:
Part #:804337
- Boss® Clamp 2 Bolt Type, 2 Gripping Fingers Attributes
Weight
0.25 lb
Material
Global Investment Cast Carbon Steel
Torque
6 ft. lbs.
Hose ID
3/8" (9.5 mm)
Hose OD To
56/64" (22.3 mm)
Hose OD From
44/64" (17.46 mm)
$
8.19
Qty:
Part #:700304
- Female NPTF x Hose Barb Attributes
Weight
0.063 lb
Material
Brass
Female Thread
NPTF
Length
1.66"
Hose ID
3/8"
Hex
3/4"
Female Thread Size
3/8"
$
2.64
Qty:
Qty:
Qty:
Qty:
Qty:
Part #:503686
- 3/8" Shank Diameter Eyebolts Plain Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Plain pattern eyebolts must never be used to lift an angular load
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
Part #:804346
- Air King® 2-Lug Hose End Attributes
Weight
0.425 lb
Size
3/8"
Material
Iron, global investment cast
Pressure Rating Metric
1 MPa
Seal
Rubber
Pressure Rating
150 PSI
$
8.61
Qty:
Qty:
Qty:
Qty:
Displaying: 1 - 24 of 89 Matching Items