Bell and Gossett
Aerokroil
View:
Active Filters :
Part #:601461
- Features&bull Excellent water removal efficiency&bull Unique deflector plate that creates swirling of theair stream ensuring maximum water anddirt separation&bull Easily disassembled for servicing without the useof tools&bull Interchangeable twist and automatic pulse drains&bull High flow 22 SCFM
$
54.55
Qty:
closeout
Part #:605160
- CLOSEOUTS Only 2 Left!
- Parker Global Air Prep System Compact Air Pressure Regulators - P32R Series #P32RB92BNNP
Technical Specifications
Port Size 1/4"
Pressure Gauge No
Port Type NPT
Gauge Port Size 1/4 inch, 1/4"
Port Size 1/4 inch, 1/4"
Flow Rate 100 - 249 / Medium SCFM, 45 - 124 / Medium dm3/sec, 148 SCFM, 70 dm3/sec
Product Type Compact Regulator, Pneumatic Regulator - Manual Adjustable
Pressure Control Range 0 to 125 psig, 0 to 8 bar, 0 - 30 psig, 0 - 2 bar
Maximum Inlet Pressure Rating 0 to 300 psig, 0 to 20 bar
Pressure Regulator Type Relieving
Port Type NPT, BSPP
Operating Temperature -13° to +150° °F, -25° to +65.5° °C
Body Material Aluminum
Seal Material Nitrile
Weight 0.41 kg, 0.9 lb
$
60.17
Qty:
Part #:503696
- 1/4" Shank Diameter Eyebolts Shoulder Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially. A steel washer or spacer may be required for proper seating
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
Part #:521100
- Specification
CATALOG NUMBER
01314
DESCRIPTION
SDS SHANK 1/4" X 6"
SHANK DIAMETER
1/4"
OVERALL LENGTH
6"
USEABLE LENGTH
4"
Qty:
Part #:510400
- Specification
CATALOG NUMBER
01372
DESCRIPTION
HD STRAIGHT SHANK 1/4" X 6"
SHANK DIAMETER
1/4"
OVERALL LENGTH
6"
USEABLE LENGTH
4"
Qty:
Part #:501675
- 1/2" Drive SAE 1/4" Standard Length Hex Bit Socket
&bull High-polished chrome finish socket cleans easily
&bull Two piece design allows bits to be replaced easily
Qty:
Part #:810242
- 5" Cold Chisels
The most commonly used chisels in the chisel line
For cutting, shaping and removing metal softer than the cutting edge of the chisel
Qty:
Part #:600417
- Parker-Watts R119-02A - 1/4" NPT Pressure Regulator
PARKER - WATTS R119 Series Pressure Regulators with a 0-25 psi Pressure Range, 300 psi Max Inlet, 100 SCFM Max Flow, 2 x 1/4" NPT Gauge Port
Parker air regulators provide quick response and accurate pressure regulation for the most demanding industrial air preparation applications. Parker offers a range of miniature, economy, compact, standard, hi-flow and pilot-operated regulators to meet a range of service needs.Product Features&bull High flow performance featuring rugged design for the most demanding applications &bull Ideal for those installations calling for constant pressure with wide variation in flow &bull Diaphragm operated design with balanced poppet design for quick and accurate regulation &bull Secondary aspiration plus balanced poppet provides quick response and accurate pressure regulation &bull Heavy duty tee handle adjustment &bull Reverse flow version available &bull Panel mount version available
anufacturer
PARKER - WATTS
Series
R119
Mfr Model #
R119-02A
Stock #
21891
Pipe Size
1/4" NPT
Reduced Pressure Range
0-25 psi
Max Inlet Pressure
300 psi
Max Flow
100 SCFM
Gauge Ports
2 x 1/4" NPT
Body Material
Zinc
Diaphragm - O-Ring Material
Buna-N
Adjustment Type
T-Handle
Panel Mount?
No
Relieving?
Yes
Gauge Included?
No
Options
Country of Origin
USA
$
119.99
Qty:
closeout
$2.42 MSRP
$
1.69
Part #:519060
- CLOSEOUTS Only 4 Left!
- Country of Origin CN:
Qty:
Part #:519041
- Country of Origin VN:
Qty:
Part #:601980
- Features&bull Proportional oil delivery over a wide range of air flows&bull Generates oil particles of 5 micron or smallerdownstream to lubricate systems having complexpiping arrangements&bull Precision needle valve assures repeatable oil deliveryand provides simple adjustment of delivery rate&bull Ideal for low and high flow applications withchanging air flow&bull Transparent sight dome for 360° visibility.&bull Yellow fill cap identifies Micro-Mist Lubricator&bull High Flow 1/4" &ndash 40 SCFM §
$
132.68
Qty:
Part #:519056
- Country of Origin CN:
Qty:
Qty:
Qty:
Qty:
closeout
$6.74 MSRP
$
4.72
Part #:519080
- CLOSEOUTS Only 1 Left!
- Country of Origin CN:
Qty:
Part #:502010
- 3 7/8" Center Punches 1/4"
Pierces or marks work by indentation for starting pilot drills in metal or other materials
Qty:
Part #:500370
- 1/4" 12-Point SAE SUPERCOMBO® Combination Wrench
&bull SUPERCOMBO® open end has specially designed grooves that direct wrench force away from fastener corners
&bull SUPERTORQUE® box opening design allows application of higher torque without rounding or deforming hex fastener points. No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points
&bull Meets or exceeds AErospace specification AS 954 for 12 point fasteners (as defined by AS 870) to provide accurate torque/tension relationship for precision application
&bull May be used on all common hex (6 point) fasteners with considerable advantage over conventional box end wrenches to increase both hand tool flexibility and economy
&bull Box and open end openings are identical
Qty:
Part #:503684
- 1/4" Shank Diameter Eyebolts Plain Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Plain pattern eyebolts must never be used to lift an angular load
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
Part #:501425
- 1/4" Drive 12-Point SAE 1/4" Shallow Socket
&bull SUPERTORQUE® lobular openings for greater turning power without deforming the fastener
&bull Designed for quick engagement on both 6 and 12 point fasteners
Qty:
Part #:811902
- 1/4" Drive 12-Point SAE 11/32" Shallow Socket
&bull SUPERTORQUE® lobular openings for greater turning power without deforming the fastener
&bull Designed for quick engagement on both 6 and 12 point fasteners
Qty:
Qty:
Part #:810253
- 5 5/8" Cape Chisels
Designed for cutting or grooving keyholes or slots
Qty:
Part #:810256
- 5 3/4" Diamond Point Chisels
Designed for making a V-groove in metal and to clean out inside corner
Qty:
Displaying: 1 - 24 of 30 Matching Items