Bussmann Division
Anchor
View:
Active Filters :
Part #:334-SL075M
- Surelock&trade Male NPT End Attributes
Weight
0.52 lb
Size
3/4"
Material
Iron
Style
Small Head
Seal
Natural Rubber
Working Pressure
200 PSIG at 70°F (21°C)
$
9.52
Qty:
Qty:
Qty:
Part #:505934
- Boss® Ground Joint Stem Attributes
Weight
0.455 lb
Size
3/4" (20 mm)
Material
Plated Steel
$
13.70
Qty:
Qty:
Part #:701216
- The TBH Series features a low maintenance design with its new patent pending System2&trade Sealing Technology. Assisting users in protecting property and life, a standard integral lock-out feature secures onto the body of the valve. Actuator ready design with ISO 5211 pattern &ndash on all sizes. The System2&trade Sealing Technology utilizes the upstream seat as a backup to the downstream seat and enhances the sealing of the downstream seat. This insures longer life cycle and performance of the valve vs. conventional PTFE seats or seats with O-ring backing where uneven seat wear results in early failure mode. Available in sizes 1/4 through 2&rdquo / DN15 - DN50 in PVC and CPVC materials, the TBH Series are fully pressure rated for 250 PSI / PN16 at 70°F/23°C non-shock across all sizes and materials. Lastly, the TBH is available with IPS or DIN/EN socket, threaded and flanged end connections.
Full 250 psi / PN16 Rating, Non-Shock at 70°F / 23°C
Integral ISO 5211 Mounting Pad for Easy Actuation
Standard Lock-Out Plate, Lock-Out / Tag-Out for up to 4 Locks
System2&trade Sealing Technology Seat Carrier Design &ndash Patent Pending
Permanent Laser Markings, Eliminates Labels
System friendly ""Molded-In"" Footpad for Skid or Panel Mount
UV Resistant Sure Grip Ergonomic Handle
FPM or EPDM Seals
Double O-Ring Stem Seals
Reversible PTFE Seats - Standard
Easy Replacement for Existing Hayward TB Series
Qty:
Part #:702603
Qty:
Part #:512583
- Air King® Clamp Attributes
Weight
0.54 lb
Size
3/4"
Material
Global investment cast carbon steel
Torque
21 ft. lbs.
Hose OD To
1-20/64" (33.3 mm)
Hose OD From
1-8/64" (28.6 mm)
$
8.65
Qty:
Part #:812455
- Jump Size King Combination Nipple NPT Threaded Attributes
Weight
0.26 lb
Size
3/4" (20 mm)
Material
Plated Steel
$
7.18
Qty:
Part #:700295
- Male NPTF x Hose Barb Attributes
Weight
0.061 lb
Material
Brass
Male Thread
NPTF
Length
1.76"
Hose ID
3/8"
Hex
11/16"
Male Thread Size
3/8"
$
2.17
Qty:
Part #:506832
- Contractors EPDM Water Hose Attributes
Weight
16.35 lb
Size
3/4" x 50"
Material
EPDM
Color
Black
Working Pressure
150 PSI
Temperature Range
-20°F to 180°F (-29°C to 82°C)
$
188.64
Qty:
Part #:103710
- Male NPTF x Hose Barb Attributes
Weight
0.18 lb
Material
Brass
Male Thread
NPTF
Length
2.19"
Hose ID
3/4"
Hex
1-1/16"
Male Thread Size
3/4"
$
4.87
Qty:
Part #:513160
- Country of Origin CN:
Qty:
Part #:513171
- Country of Origin CN:
Qty:
Part #:521084
- Country of Origin TW:
Qty:
Part #:810217
- 1/2" Drive SAE 3/8" Standard Length Hex Bit Socket
&bull High-polished chrome finish socket cleans easily
&bull Two piece design allows bits to be replaced easily
Qty:
Part #:804344
- Air King® 2-Lug Female NPT End Attributes
Weight
0.6 lb
Size
3/4"
Material
Iron
Pressure Rating Metric
1 MPa
Seal
Rubber
Pressure Rating
150 PSI
$
7.76
Qty:
Part #:702874
- Barbed Hose Mender Attributes
Weight
0.0405 lb
Material
Brass
Length
2.06"
Hose ID
3/8"
$
1.71
Qty:
Part #:503700
- 3/8" Shank Diameter Eyebolts Shoulder Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially. A steel washer or spacer may be required for proper seating
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
Part #:503704
- 3/4" Shank Diameter Eyebolts Shoulder Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially. A steel washer or spacer may be required for proper seating
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
Part #:100150
- Clear PVC Tubing Attributes
Tube OD
1/2"
Weight
5.95 lb
Material
PVC
Tube ID
3/8"
Color
Clear
Working Pressure
70 PSI @70°F
Length
100'
Maximum Temperature
175°F (79.4°C)
$
0.65
Qty:
Part #:804350
- Air King® 2-Lug Hose End Attributes
Weight
0.6 lb
Size
3/4"
Material
Iron
Pressure Rating Metric
1 MPa
Seal
Rubber
Pressure Rating
150 PSI
$
7.06
Qty:
Part #:804342
- Air King® 2-Lug Male NPT End Attributes
Weight
0.6 lb
Size
3/4"
Material
Iron
Pressure Rating Metric
1 MPa
Seal
Rubber
Pressure Rating
150 PSI
$
7.91
Qty:
Part #:808647
- Boss® Ground Joint Complete Female Attributes
$
36.90
Qty:
Displaying: 1 - 24 of 155 Matching Items