Loctite
Asc Engineered Solutions
View:
Active Filters :
- Brand: Asc Engineered Solutions Loctite
Part #:521020
- Product details Legacy part 51005 10 oz Brush Top Can Exclusive Formula Suspends Copper and Graphite in a High-Quality Grease Protects Metal Parts From Corrosion, Galling and Seizing at Temps to 1800 °F Use On Metals, Plastics and Non-Metallic Gaskets description Exclusive formula suspends copper and graphite in a high-quality grease. applications Electrically conductive Aluminum Soft metals features Protects metal from rust and corrosion Resists seizing and galling Temperatures to 1,800 F (982 C) CARB Complies with VOC regulations as detailed by the California Air Resource Board OTC Complies with VOC regulations as detailed by the Ozone Transport Commission Mil-PRF907-F CFIA approved Equipment associated with petroleum chemicals, steel mills, paper plants, marine and foundries
$
33.04
Qty:
Part #:521212
- Technical Specs Item Pipe Thread Sealant Size 50 mL Container Type Tube Chemical Type Dimethacrylate Ester Strength Medium Color White Gas Pressure Range 10,000 psi Begins to Harden 24 hr Application Temp. Range 72 Degrees F Performance Temp. Range -65 Degrees to 400 Degrees F Flash Point 199.94 Degrees F Specific Gravity 1.21 @ 25 Degrees C Viscosity 350,000cP For Use With NF Application Thread sealing
$
26.91
Qty:
Part #:516691
- Technical Specs
Patching Application Mortars and Patching Cements Item Flooring/Grouting Concrete Repair Color Gray Number of Components 2 Container Size 1 gal Container Style Pail Coverage 4.8 sq ft VOC Less Than 1.0%, 10g/L Flash Point Greater Than 212 Degrees F Starts to Harden Not Specified Full Cure Time Not Specified For Use On Surface Material Concrete, Glass, Steel, Wood Application 000 PSI, Chemically Resistant, Compressive Strength 13, Rapid Setting, Summer and Winter Additives Also Available to Aid Cure Times Characteristics 2-Part, Rapid Set Time Meets OSHA Cured Color Family Grays
$
144.74
Qty:
Part #:504526
- Technical Specs Item RTV Silicone Sealant Type Shrink-Resistant for Precut Gaskets Size 300 mL Color Blue Temp. Range -65 to 500 Degrees F Specific Gravity 1.04 Flash Point 199.4 Degrees F Full Cure 24 hr Begins to Harden 10 min Application Coat Pre-cut Gaskets for Increased Reliability
$
37.71
Qty:
Part #:507497
- Technical Specs Item RTV Silicone Sealant Type High Temp. Size 80 mL Color Red Temp. Range -75 to 600 Degrees F Specific Gravity 1.01 Flash Point 199.4 Degrees F Full Cure 24 hr Begins to Harden 10 min Application Coat Pre-cut Gaskets for Increased Reliability
$
15.81
Qty:
Part #:505834
- Technical Specs
Item RTV Silicone Sealant Type High Temp. Size 300 mL Color Red Temp. Range -75 to 600 Degrees F Specific Gravity 1.01 Flash Point 199.4 Degrees F Full Cure 24 hr Begins to Harden Not Specified Application Fills Gaps to 0.25 in Between Parts that are Mated
$
51.84
Qty:
$
27.83
Qty:
Part #:503330
- Technical Specs Item Threadlocker Threadlocker Classification Threadlocker Threadlocker Strength Medium Threadlocker Color Blue Threadlocker Disassembly Removable Physical Form Liquid Threadlocker Container Bottle Size 10 mL Chemical Type Anaerobic For Fastener Dia. 1/4 in to 3/4 in Begins to Harden 5 min Series 242 Gap Fill 0.005 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Greater Than 93.3 Degrees C Specific Gravity 1.1 Viscosity 1,200 to 5,000 cP Removable With Hand Tools Application Locking Nuts and Bolts 1/4 in to 3/4 in . Removable With Hand Tools. Standards ASTM-D5363 Group 3 Class 2 Grade 1, CFIA, MIL-S-46163A Type II Grade N, NSF P1, OSHA Hazard Communication, RoHS Compliant Green Certification or Other Recognition NSF(R) Certified (Sustainability or Environmental Standard) Technical Specs Item Threadlocker Threadlocker Classification Threadlocker Threadlocker Strength Medium Threadlocker Color Blue Threadlocker Disassembly Removable Physical Form Liquid Threadlocker Container Bottle Size 10 mL Chemical Type Anaerobic For Fastener Dia. 1/4 in to 3/4 in Begins to Harden 5 min Series 242 Gap Fill 0.005 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Greater Than 93.3 Degrees C Specific Gravity 1.1 Viscosity 1,200 to 5,000 cP Removable With Hand Tools Application Locking Nuts and Bolts 1/4 in to 3/4 in . Removable With Hand Tools. Standards ASTM-D5363 Group 3 Class 2 Grade 1, CFIA, MIL-S-46163A Type II Grade N, NSF P1, OSHA Hazard Communication, RoHS Compliant Green Certification or Other Recognition NSF(R) Certified (Sustainability or Environmental Standard) Technical Specs Item Threadlocker Threadlocker Classification Threadlocker Threadlocker Strength Medium Threadlocker Color Blue Threadlocker Disassembly Removable Physical Form Liquid Threadlocker Container Bottle Size 10 mL Chemical Type Anaerobic For Fastener Dia. 1/4 in to 3/4 in Begins to Harden 5 min Series 242 Gap Fill 0.005 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Greater Than 93.3 Degrees C Specific Gravity 1.1 Viscosity 1,200 to 5,000 cP Removable With Hand Tools Application Locking Nuts and Bolts 1/4 in to 3/4 in . Removable With Hand Tools. Standards ASTM-D5363 Group 3 Class 2 Grade 1, CFIA, MIL-S-46163A Type II Grade N, NSF P1, OSHA Hazard Communication, RoHS Compliant Green Certification or Other Recognition NSF(R) Certified (Sustainability or Environmental Standard) Technical Specs Item Threadlocker Threadlocker Classification Threadlocker Threadlocker Strength Medium Threadlocker Color Blue Threadlocker Disassembly Removable Physical Form Liquid Threadlocker Container Bottle Size 10 mL Chemical Type Anaerobic For Fastener Dia. 1/4 in to 3/4 in Begins to Harden 5 min Series 242 Gap Fill 0.005 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Greater Than 93.3 Degrees C Specific Gravity 1.1 Viscosity 1,200 to 5,000 cP Removable With Hand Tools Application Locking Nuts and Bolts 1/4 in to 3/4 in . Removable With Hand Tools. Standards ASTM-D5363 Group 3 Class 2 Grade 1, CFIA, MIL-S-46163A Type II Grade N, NSF P1, OSHA Hazard Communication, RoHS Compliant Green Certification or Other Recognition NSF(R) Certified (Sustainability or Environmental Standard) Technical Specs Item Threadlocker Threadlocker Classification Threadlocker Threadlocker Strength Medium Threadlocker Color Blue Threadlocker Disassembly Removable Physical Form Liquid Threadlocker Container Bottle Size 10 mL Chemical Type Anaerobic For Fastener Dia. 1/4 in to 3/4 in Begins to Harden 5 min Series 242 Gap Fill 0.005 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Greater Than 93.3 Degrees C Specific Gravity 1.1 Viscosity 1,200 to 5,000 cP Removable With Hand Tools Application Locking Nuts and Bolts 1/4 in to 3/4 in . Removable With Hand Tools. Standards ASTM-D5363 Group 3 Class 2 Grade 1, CFIA, MIL-S-46163A Type II Grade N, NSF P1, OSHA Hazard Communication, RoHS Compliant Green Certification or Other Recognition NSF(R) Certified (Sustainability or Environmental Standard)
$
22.89
Qty:
Part #:506991
- Technical Specs Item Threadlocker Threadlocker Classification Threadlocker Threadlocker Strength Medium Threadlocker Color Blue Threadlocker Disassembly Removable Physical Form Liquid Threadlocker Container Bottle Size 50 mL Chemical Type Anaerobic For Fastener Dia. 1/4 in to 3/4 in Begins to Harden 5 min Series 242 Gap Fill 0.005 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Greater Than 93.3 Degrees C Specific Gravity 1.1 Viscosity 1,200 to 5,000 cP Removable With Hand Tools Application Locking Nuts and Bolts 1/4 in to 3/4 in . Removable With Hand Tools. Standards ASTM-D5363 Group 3 Class 2 Grade 1, CFIA, MIL-S-46163A Type II Grade N, NSF P1, OSHA Hazard Communication, RoHS Compliant Green Certification or Other Recognition NSF(R) Certified (Sustainability or Environmental Standard) Technical Specs Item Threadlocker Threadlocker Classification Threadlocker Threadlocker Strength Medium Threadlocker Color Blue Threadlocker Disassembly Removable Physical Form Liquid Threadlocker Container Bottle Size 50 mL Chemical Type Anaerobic For Fastener Dia. 1/4 in to 3/4 in Begins to Harden 5 min Series 242 Gap Fill 0.005 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Greater Than 93.3 Degrees C Specific Gravity 1.1 Viscosity 1,200 to 5,000 cP Removable With Hand Tools Application Locking Nuts and Bolts 1/4 in to 3/4 in . Removable With Hand Tools. Standards ASTM-D5363 Group 3 Class 2 Grade 1, CFIA, MIL-S-46163A Type II Grade N, NSF P1, OSHA Hazard Communication, RoHS Compliant Green Certification or Other Recognition NSF(R) Certified (Sustainability or Environmental Standard)
$
63.69
Qty:
Part #:506992
- Technical Specs
Item Threadlocker Threadlocker Classification Threadlocker Threadlocker Strength High Threadlocker Color Red Threadlocker Disassembly Permanent Physical Form Liquid Threadlocker Container Bottle Size 50 mL Chemical Type Anaerobic For Fastener Dia. Up to 3/4 in Begins to Harden 10 min Series 262 Gap Fill 0.005 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Greater Than 93.3 Degrees C Specific Gravity 1.05 Viscosity 1,800 to 5,000 cP Removable With Heat and Hand Tools Application Chemical Conditions, Heavy Shock and Vibration Applications. High Strength Requires Heat and/or Special Tools For Removal, Locking Bolts Up to 3/4 in . For Extreme Environmental Standards MIL-S-46163A Type II Grade 0, OSHA Hazard Communication, RoHS Compliant
$
63.69
Qty:
Part #:509136
- Technical Specs Item Wicking Grade Threadlocker Threadlocker Classification Wicking Grade Threadlocker Threadlocker Strength Medium Threadlocker Color Green Threadlocker Disassembly Removable Physical Form Liquid Threadlocker Container Bottle Size 50 mL Chemical Type Anaerobic For Fastener Dia. Up to 1/2 in Begins to Harden 20 min Series 290 Gap Fill 0.003 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Greater Than 93.3 Degrees C Specific Gravity 1.07 Viscosity 25 to 55 cP Removable With Hand Tools Application For Locking Preassembled Fasteners No. 2 to 1/2 in . Penetrates By Capillary Action Standards MIL-S-46163A Type III Grade R, NSF P1/ANSI 61 Certified, OSHA Hazard Communication, RoHS Certified
$
60.11
Qty:
Part #:502037
- Technical Specs
Item RTV Silicone Sealant
Type Shrink-Resistant for Precut Gaskets
Size 80 mL
Color Blue
Temp. Range -65 to 500 Degrees F
Specific Gravity 1.04
Flash Point 199.4 Degrees F
Full Cure 24 hr
Begins to Harden 10 min
Application Coat Pre-cut Gaskets for Increased Reliability
$
12.31
Qty:
Part #:509455
- Technical Specs Item Pipe Thread Sealant Size 50 mL Container Type Bottle Chemical Type Methacrylate Ester Color Purple Gas Pressure Range 10,000 psi Begins to Harden Not Specified Application Temp. Range 72 Degrees F Performance Temp. Range -65 Degrees to 300 Degrees F Flash Point 199.94 Degrees F Specific Gravity 1.02 @ 25 Degrees C Viscosity 14,000cP For Use With 7649, Primer 7088, or 7471 Application Locks and Seals Hydraulic and Pneumatic Fittings without Fouling the System, Suitable for Fittings Up to 50mm in Diameter Includes Pneumatic and Hydraulic Fittings
$
59.88
Qty:
closeout
Part #:505912
- CLOSEOUTS Only 1 Left!
- Technical Specs Item Rust Treatment Color Opaque Container Size 5 gal Dry Time 20 min Application Method Brush Or Commercial Sprayer
$
918.58
PAIL
Qty:
Part #:503341
- Technical Specs Item Threadlocker Threadlocker Classification Threadlocker Threadlocker Strength High Threadlocker Color Red Threadlocker Disassembly Permanent Physical Form Liquid Threadlocker Container Bottle Size 10 mL Chemical Type Anaerobic For Fastener Dia. Up to 3/4 in Begins to Harden 10 min Series 262 Gap Fill 0.005 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Greater Than 93.3 Degrees C Specific Gravity 1.05 Viscosity 1,800 to 5,000 cP Removable With Heat and Hand Tools Application Chemical Conditions, Heavy Shock and Vibration Applications. High Strength Requires Heat and/or Special Tools For Removal, Locking Bolts Up to 3/4 in . For Extreme Environmental Standards MIL-S-46163A Type II Grade 0, OSHA Hazard Communication, RoHS Compliant
$
22.90
Qty:
Part #:101200
- asc-es.comSCI® Press - Copper FittingsApplications*Fluids containing hydrocarbon-based oils are not compatible with the EPDM seal.All copper tubing must comply with the ASTM B88 standard. Fittings are approved for installations above and below ground as permitted by local building codes.Copper Fitting Alloy C1220 has been evaluated by IAPMO R&T Lab to NSF/ANSI 61 for use in drinking water supplies of pH 6.5 and above. Drinking water supplies that are less than pH 6.5may require corrosion control to limit leaching of copper into the drinking water.PS-10.22 page 2 PS-SUB-SCI Press-Cooper-v01 20221020SCI Press Copper Fittings are intended for use with ASTM B88 seamless copperwater tube (Types K, L, & M) in residential and commercial plumbing andmechanical systems. Common applications are listed below:
- Types of Service Pressure Temperature EPDM Compatibility*Liquids/Potable WaterWater Systems 300 psi (Test pressure of 600 psi) -20°F to 248° YSteam (Residential) 5 psi Max 227° YAcetone (Liquid) 70 psi -14° to 104°' YFuel, Oil, LubricantsEthanol (Pure grain alcohol) 200 psi Ambient, less than 250° YGasesCompressed Air(Oil concentration ≤25 mg/m3) 200 psi Max 140° YNitrogen 200 psi Max 140° YCarbon Dioxide 200 psi Max 140° YCarbon Monoxide 200 psi Max 140° YArgon 200 psi Max 140° YOxygen(Non-Medical, Keep free of oil and grease) 140 psi Max 140° YHydrogen 125 psi Max 140° YVacuum (Maximum absolute pressure) 750μm Hg Max 160° YVacuum (Maximum differential pressure) 29.2" Hg Max 160° Y
Qty:
Part #:110001
- The SCI Press Technology for Copper Systems includes couplings, elbows, tees, adapters, reducers, caps, unions, and flanges for mechanical copper systems. They provide an economical and reliable piping connection that can be used for commercial, industrial, and residential markets eliminating the need of using conventional methods of soldering and brazing. SCI Press Copper Fittings are intended for use with ASTM B88, Types K, L, and M hard copper tubing in sizes ½" to 4" and soft copper tubing in sizes ½" to 1¼". After visual confirmation of each connection, a system pressure test may be performed in accordance with local code requirements. The SCI Press Technology for Copper Systems is compatible with common pressing tools and jaws.
Qty:
Part #:110002
- The SCI Press Technology for Copper Systems includes couplings, elbows, tees, adapters, reducers, caps, unions, and flanges for mechanical copper systems. They provide an economical and reliable piping connection that can be used for commercial, industrial, and residential markets eliminating the need of using conventional methods of soldering and brazing. SCI Press Copper Fittings are intended for use with ASTM B88, Types K, L, and M hard copper tubing in sizes ½" to 4" and soft copper tubing in sizes ½" to 1¼". After visual confirmation of each connection, a system pressure test may be performed in accordance with local code requirements. The SCI Press Technology for Copper Systems is compatible with common pressing tools and jaws.
Qty:
Part #:110004
- The SCI Press Technology for Copper Systems includes couplings, elbows, tees, adapters, reducers, caps, unions, and flanges for mechanical copper systems. They provide an economical and reliable piping connection that can be used for commercial, industrial, and residential markets eliminating the need of using conventional methods of soldering and brazing. SCI Press Copper Fittings are intended for use with ASTM B88, Types K, L, and M hard copper tubing in sizes ½" to 4" and soft copper tubing in sizes ½" to 1¼". After visual confirmation of each connection, a system pressure test may be performed in accordance with local code requirements. The SCI Press Technology for Copper Systems is compatible with common pressing tools and jaws.
Qty:
Part #:110006
- The SCI Press Technology for Copper Systems includes couplings, elbows, tees, adapters, reducers, caps, unions, and flanges for mechanical copper systems. They provide an economical and reliable piping connection that can be used for commercial, industrial, and residential markets eliminating the need of using conventional methods of soldering and brazing. SCI Press Copper Fittings are intended for use with ASTM B88, Types K, L, and M hard copper tubing in sizes ½" to 4" and soft copper tubing in sizes ½" to 1¼". After visual confirmation of each connection, a system pressure test may be performed in accordance with local code requirements. The SCI Press Technology for Copper Systems is compatible with common pressing tools and jaws.
Qty:
Part #:110008
- The SCI Press Technology for Copper Systems includes couplings, elbows, tees, adapters, reducers, caps, unions, and flanges for mechanical copper systems. They provide an economical and reliable piping connection that can be used for commercial, industrial, and residential markets eliminating the need of using conventional methods of soldering and brazing. SCI Press Copper Fittings are intended for use with ASTM B88, Types K, L, and M hard copper tubing in sizes ½" to 4" and soft copper tubing in sizes ½" to 1¼". After visual confirmation of each connection, a system pressure test may be performed in accordance with local code requirements. The SCI Press Technology for Copper Systems is compatible with common pressing tools and jaws.
Qty:
Part #:110010
- The SCI Press Technology for Copper Systems includes couplings, elbows, tees, adapters, reducers, caps, unions, and flanges for mechanical copper systems. They provide an economical and reliable piping connection that can be used for commercial, industrial, and residential markets eliminating the need of using conventional methods of soldering and brazing. SCI Press Copper Fittings are intended for use with ASTM B88, Types K, L, and M hard copper tubing in sizes ½" to 4" and soft copper tubing in sizes ½" to 1¼". After visual confirmation of each connection, a system pressure test may be performed in accordance with local code requirements. The SCI Press Technology for Copper Systems is compatible with common pressing tools and jaws.
Qty:
Part #:110040
- The SCI Press Technology for Copper Systems includes couplings, elbows, tees, adapters, reducers, caps, unions, and flanges for mechanical copper systems. They provide an economical and reliable piping connection that can be used for commercial, industrial, and residential markets eliminating the need of using conventional methods of soldering and brazing. SCI Press Copper Fittings are intended for use with ASTM B88, Types K, L, and M hard copper tubing in sizes ½" to 4" and soft copper tubing in sizes ½" to 1¼". After visual confirmation of each connection, a system pressure test may be performed in accordance with local code requirements. The SCI Press Technology for Copper Systems is compatible with common pressing tools and jaws.
Qty:
Part #:110042
- The SCI Press Technology for Copper Systems includes couplings, elbows, tees, adapters, reducers, caps, unions, and flanges for mechanical copper systems. They provide an economical and reliable piping connection that can be used for commercial, industrial, and residential markets eliminating the need of using conventional methods of soldering and brazing. SCI Press Copper Fittings are intended for use with ASTM B88, Types K, L, and M hard copper tubing in sizes ½" to 4" and soft copper tubing in sizes ½" to 1¼". After visual confirmation of each connection, a system pressure test may be performed in accordance with local code requirements. The SCI Press Technology for Copper Systems is compatible with common pressing tools and jaws.
Qty:
Displaying: 25 - 48 of 185 Matching Items