Cantex
Bell and Gossett
View:
Active Filters :
Part #:304331
- 20A Double Pole, Double Throw Switch, Brown
Oversize silver alloy contacts for long life and better heat dissipation.
Side wired terminals accept #14 - #10 AWG copper or copper-clad conductors.
Fiber terminal insulation barriers standard.
Can be mounted in standard device boxes or in NEMA 1 sheet steel enclosures.
Bodies, covers, and toggles molded of durable nylon.
Single Pole-Double Throw and Double Pole-Double Throw.
Locking Switches supplied with one 1498-NT key.
Normally open.
For covering patents, see www.legrand.us/patents.
For compatible wall plate options, from our TradeMaster unbreakable plates to our radiant screwless plates to our metal wall plates, click here.
CSA File Number 17949
Qty:
Part #:304966
- Extremely durable for hard-use institutional applications. Spring-loaded covers close automatically when plugs are removed. Die-cast copper-free aluminum construction. Stainless steel springs. Screws and spring covers are chrome-plated brass. Baked-on lacquer finish. Heavy rubber gaskets provide positive seal. All covers below are for 4 screw mounting only. Comply with 2005 NEC Section 406.8(A) and 406.8(B)(2).
$
12.35
Qty:
closeout
Part #:308442
- CLOSEOUTS Only 1 Left!
- 60A Power Interrupting Receptacle, Diecast with Lift Lid Enclosure
$
964.68
Qty:
Part #:700652
- The TBH Series features a low maintenance design with its new patent pending System2&trade Sealing Technology. Assisting users in protecting property and life, a standard integral lock-out feature secures onto the body of the valve. Actuator ready design with ISO 5211 pattern &ndash on all sizes. The System2&trade Sealing Technology utilizes the upstream seat as a backup to the downstream seat and enhances the sealing of the downstream seat. This insures longer life cycle and performance of the valve vs. conventional PTFE seats or seats with O-ring backing where uneven seat wear results in early failure mode. Available in sizes 1/4 through 2&rdquo / DN15 - DN50 in PVC and CPVC materials, the TBH Series are fully pressure rated for 250 PSI / PN16 at 70°F/23°C non-shock across all sizes and materials. Lastly, the TBH is available with IPS or DIN/EN socket, threaded and flanged end connections.
Full 250 psi / PN16 Rating, Non-Shock at 70°F / 23°C
Integral ISO 5211 Mounting Pad for Easy Actuation
Standard Lock-Out Plate, Lock-Out / Tag-Out for up to 4 Locks
System2&trade Sealing Technology Seat Carrier Design &ndash Patent Pending
Permanent Laser Markings, Eliminates Labels
System friendly ""Molded-In"" Footpad for Skid or Panel Mount
UV Resistant Sure Grip Ergonomic Handle
FPM or EPDM Seals
Double O-Ring Stem Seals
Reversible PTFE Seats - Standard
Easy Replacement for Existing Hayward TB Series
Qty:
Part #:700665
- The TBH Series features a low maintenance design with its new patent pending System2&trade Sealing Technology. Assisting users in protecting property and life, a standard integral lock-out feature secures onto the body of the valve. Actuator ready design with ISO 5211 pattern &ndash on all sizes. The System2&trade Sealing Technology utilizes the upstream seat as a backup to the downstream seat and enhances the sealing of the downstream seat. This insures longer life cycle and performance of the valve vs. conventional PTFE seats or seats with O-ring backing where uneven seat wear results in early failure mode. Available in sizes 1/4 through 2&rdquo / DN15 - DN50 in PVC and CPVC materials, the TBH Series are fully pressure rated for 250 PSI / PN16 at 70°F/23°C non-shock across all sizes and materials. Lastly, the TBH is available with IPS or DIN/EN socket, threaded and flanged end connections.
Full 250 psi / PN16 Rating, Non-Shock at 70°F / 23°C
Integral ISO 5211 Mounting Pad for Easy Actuation
Standard Lock-Out Plate, Lock-Out / Tag-Out for up to 4 Locks
System2&trade Sealing Technology Seat Carrier Design &ndash Patent Pending
Permanent Laser Markings, Eliminates Labels
System friendly ""Molded-In"" Footpad for Skid or Panel Mount
UV Resistant Sure Grip Ergonomic Handle
FPM or EPDM Seals
Double O-Ring Stem Seals
Reversible PTFE Seats - Standard
Easy Replacement for Existing Hayward TB Series
Qty:
Part #:700811
- The TBH Series features a low maintenance design with its new patent pending System2&trade Sealing Technology. Assisting users in protecting property and life, a standard integral lock-out feature secures onto the body of the valve. Actuator ready design with ISO 5211 pattern &ndash on all sizes. The System2&trade Sealing Technology utilizes the upstream seat as a backup to the downstream seat and enhances the sealing of the downstream seat. This insures longer life cycle and performance of the valve vs. conventional PTFE seats or seats with O-ring backing where uneven seat wear results in early failure mode. Available in sizes 1/4 through 2&rdquo / DN15 - DN50 in PVC and CPVC materials, the TBH Series are fully pressure rated for 250 PSI / PN16 at 70°F/23°C non-shock across all sizes and materials. Lastly, the TBH is available with IPS or DIN/EN socket, threaded and flanged end connections.
Full 250 psi / PN16 Rating, Non-Shock at 70°F / 23°C
Integral ISO 5211 Mounting Pad for Easy Actuation
Standard Lock-Out Plate, Lock-Out / Tag-Out for up to 4 Locks
System2&trade Sealing Technology Seat Carrier Design &ndash Patent Pending
Permanent Laser Markings, Eliminates Labels
System friendly ""Molded-In"" Footpad for Skid or Panel Mount
UV Resistant Sure Grip Ergonomic Handle
FPM or EPDM Seals
Double O-Ring Stem Seals
Reversible PTFE Seats - Standard
Easy Replacement for Existing Hayward TB Series
Qty:
Part #:700813
- The TBH Series features a low maintenance design with its new patent pending System2&trade Sealing Technology. Assisting users in protecting property and life, a standard integral lock-out feature secures onto the body of the valve. Actuator ready design with ISO 5211 pattern &ndash on all sizes. The System2&trade Sealing Technology utilizes the upstream seat as a backup to the downstream seat and enhances the sealing of the downstream seat. This insures longer life cycle and performance of the valve vs. conventional PTFE seats or seats with O-ring backing where uneven seat wear results in early failure mode. Available in sizes 1/4 through 2&rdquo / DN15 - DN50 in PVC and CPVC materials, the TBH Series are fully pressure rated for 250 PSI / PN16 at 70°F/23°C non-shock across all sizes and materials. Lastly, the TBH is available with IPS or DIN/EN socket, threaded and flanged end connections.
Full 250 psi / PN16 Rating, Non-Shock at 70°F / 23°C
Integral ISO 5211 Mounting Pad for Easy Actuation
Standard Lock-Out Plate, Lock-Out / Tag-Out for up to 4 Locks
System2&trade Sealing Technology Seat Carrier Design &ndash Patent Pending
Permanent Laser Markings, Eliminates Labels
System friendly ""Molded-In"" Footpad for Skid or Panel Mount
UV Resistant Sure Grip Ergonomic Handle
FPM or EPDM Seals
Double O-Ring Stem Seals
Reversible PTFE Seats - Standard
Easy Replacement for Existing Hayward TB Series
Qty:
Part #:700815
- The TBH Series features a low maintenance design with its new patent pending System2&trade Sealing Technology. Assisting users in protecting property and life, a standard integral lock-out feature secures onto the body of the valve. Actuator ready design with ISO 5211 pattern &ndash on all sizes. The System2&trade Sealing Technology utilizes the upstream seat as a backup to the downstream seat and enhances the sealing of the downstream seat. This insures longer life cycle and performance of the valve vs. conventional PTFE seats or seats with O-ring backing where uneven seat wear results in early failure mode. Available in sizes 1/4 through 2&rdquo / DN15 - DN50 in PVC and CPVC materials, the TBH Series are fully pressure rated for 250 PSI / PN16 at 70°F/23°C non-shock across all sizes and materials. Lastly, the TBH is available with IPS or DIN/EN socket, threaded and flanged end connections.
Full 250 psi / PN16 Rating, Non-Shock at 70°F / 23°C
Integral ISO 5211 Mounting Pad for Easy Actuation
Standard Lock-Out Plate, Lock-Out / Tag-Out for up to 4 Locks
System2&trade Sealing Technology Seat Carrier Design &ndash Patent Pending
Permanent Laser Markings, Eliminates Labels
System friendly ""Molded-In"" Footpad for Skid or Panel Mount
UV Resistant Sure Grip Ergonomic Handle
FPM or EPDM Seals
Double O-Ring Stem Seals
Reversible PTFE Seats - Standard
Easy Replacement for Existing Hayward TB Series
Qty:
Part #:700877
Qty:
Part #:701212
- The TBH Series features a low maintenance design with its new patent pending System2&trade Sealing Technology. Assisting users in protecting property and life, a standard integral lock-out feature secures onto the body of the valve. Actuator ready design with ISO 5211 pattern &ndash on all sizes. The System2&trade Sealing Technology utilizes the upstream seat as a backup to the downstream seat and enhances the sealing of the downstream seat. This insures longer life cycle and performance of the valve vs. conventional PTFE seats or seats with O-ring backing where uneven seat wear results in early failure mode. Available in sizes 1/4 through 2&rdquo / DN15 - DN50 in PVC and CPVC materials, the TBH Series are fully pressure rated for 250 PSI / PN16 at 70°F/23°C non-shock across all sizes and materials. Lastly, the TBH is available with IPS or DIN/EN socket, threaded and flanged end connections.
Full 250 psi / PN16 Rating, Non-Shock at 70°F / 23°C
Integral ISO 5211 Mounting Pad for Easy Actuation
Standard Lock-Out Plate, Lock-Out / Tag-Out for up to 4 Locks
System2&trade Sealing Technology Seat Carrier Design &ndash Patent Pending
Permanent Laser Markings, Eliminates Labels
System friendly ""Molded-In"" Footpad for Skid or Panel Mount
UV Resistant Sure Grip Ergonomic Handle
FPM or EPDM Seals
Double O-Ring Stem Seals
Reversible PTFE Seats - Standard
Easy Replacement for Existing Hayward TB Series
Qty:
Part #:701216
- The TBH Series features a low maintenance design with its new patent pending System2&trade Sealing Technology. Assisting users in protecting property and life, a standard integral lock-out feature secures onto the body of the valve. Actuator ready design with ISO 5211 pattern &ndash on all sizes. The System2&trade Sealing Technology utilizes the upstream seat as a backup to the downstream seat and enhances the sealing of the downstream seat. This insures longer life cycle and performance of the valve vs. conventional PTFE seats or seats with O-ring backing where uneven seat wear results in early failure mode. Available in sizes 1/4 through 2&rdquo / DN15 - DN50 in PVC and CPVC materials, the TBH Series are fully pressure rated for 250 PSI / PN16 at 70°F/23°C non-shock across all sizes and materials. Lastly, the TBH is available with IPS or DIN/EN socket, threaded and flanged end connections.
Full 250 psi / PN16 Rating, Non-Shock at 70°F / 23°C
Integral ISO 5211 Mounting Pad for Easy Actuation
Standard Lock-Out Plate, Lock-Out / Tag-Out for up to 4 Locks
System2&trade Sealing Technology Seat Carrier Design &ndash Patent Pending
Permanent Laser Markings, Eliminates Labels
System friendly ""Molded-In"" Footpad for Skid or Panel Mount
UV Resistant Sure Grip Ergonomic Handle
FPM or EPDM Seals
Double O-Ring Stem Seals
Reversible PTFE Seats - Standard
Easy Replacement for Existing Hayward TB Series
Qty:
Part #:701231
- Product Description
TB Series true union ball valves are offered in PVC, CPVC and the new Platinum GFPP. O-rings are FPM or EPDM and seats are PTFE. Up to 2 in. sizes have socket and threaded end connections. A trigger style lockout handle is an option. All valves are assembled with silicone free lubricant.
Qty:
Part #:701233
- TB Series true union ball valves are offered in PVC, CPVC and Platinum GFPP. O-rings are FPM or EPDM and seats are PTFE. Up to 2 in. sizes have socket and threaded end connections. A trigger style lockout handle is an option. All valves are assembled with silicone free lubricant.
Features
NSF/ANSI 61 Listed
PVC, CPVC and GFPP
Full Port Design
Reversible PTFE Seats
Double O-Ring Stem Seals
Easy to Service
Easily Automated
Options
Lockouts Available
2 in. Square Operating Nut
Stem Extensions
Pneumatic and Electric Actuators
Spring Return Handle
Qty:
Part #:702093
Qty:
Part #:702603
Qty:
Part #:702883
Qty:
Part #:703640
Qty:
Part #:703650
Qty:
Part #:703983
Qty:
Part #:705190
Qty:
Part #:705191
Qty:
Part #:307191
- 15A NEMA L515 Plug - Black Back, White Front Body
Quick-thread assembly screws and cord-grip screws come backed-out, ready-to-wire.
Industrial-strength, brass alloy plug blades and connector contacts resist heat rise, provide excellent conductivity.
Raised ribs provide non-slip gripping profile for turning to lock and unlock.
Double dovetail design provides superior protection against cord pull-out forces.
Impact- and corrosion-resistant durable nylon 6/6 shell material.
Rounded back contour reduces snags and hang-ups on the job site.
Scallop shell design provides non-slip gripping surface for insertion and withdrawal.
Visible stamped NEMA configuration and device rating.
New-design external cord grips provide visible assurance of safe and proper cord retention.
Integral flexible rubber cord grommet conforms to and seals around SO cord to provide protection from oils, water, or chips entering wiring chamber.
Qty:
$
448.55
Qty:
Part #:510283
- CM Series 632
close radius trolley With revolutionary advances, this shorter, more compact
trolley is 50% lighter than competitive trolleys, yet every bit
as tough. Negotiates radius curves as tight as 7 to 10 inches
Made of highest quality rolled steel
Unique double row, ball bearing wheel design
for greater wear capacity
Larger V-bars available for wider flange adjustment
For low headroom applications
Bearings prepacked with lifetime lubricant
Exclusive Dial-Fit collar quickly adapts trolley to
wide range of beams and patented rails
Dust covers shield and protect bearings
Trolleys available for larger beams, rails or tracks
contact CM
Cast iron trolley guards available (except for 3 ton)
Lifetime warranty
Made in U.S.A.
$
588.72
Qty:
Displaying: 1 - 24 of 914 Matching Items