Imark/edn Milwaukee Electric
Columbus McKinnon (C-M)
View:
Active Filters :
Qty:
Part #:514778
- M18&trade Cordless Multi-Tool (Tool Only)
The Milwaukee® M18&trade Cordless Multi-Tool cuts up to 50% faster and delivers up to 2X more cuts per charge than the competitors. With best-in-class speed and performance, the cordless Multi-Tool offers the versatility to complete problematic jobsite applications. Ideal for remodelers, flooring contractors, maintenance repair technicians and electricians, the cordless Multi-Tool cuts, grinds, sands and scrapes at odd angles and in areas difficult to
Qty:
Part #:296220
- M18 FUEL&trade 1/2" Mid-Torque Impact Wrench w/ Friction Ring Bare Tool
Our M18 FUEL&trade 1/2" Mid-Torque Impact Wrench w/ Friction Ring delivers the best power to weight ratio, most access in tight spaces, and faster removal speed. It provides 650 ft-lbs of nut-busting torque and only weighs 5.1 lbs, making it extremely versatile, capable of performing a wide variety of applications. Its POWERSTATE&trade Brushless Motor generates the power needed to quickly perform many tasks, such as removing large bolts or lug nuts. This MILWAUKEE® 1/2" Impact Wrench is the most compact in its class, giving you access to stubborn fasteners in spaces where larger impact wrenches can&rsquot fit without needing to disassemble components to reach bolts. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL&trade offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF&trade control applies no more than 35 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers you full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS&trade Intelligence ensures maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The M18&trade REDLITHIUM&trade battery pack (not included) fits M18&trade tools, delivering more work per charge and more work over the life of the pack.
Qty:
closeout
$843.00 MSRP
$
611.28
Part #:513000
- CLOSEOUTS Only 1 Left!
- Nut Busting Torque 1100 ft-lbs Tool Warranty 5 Years Weight 5.5 lbs Power Source Cordless :
Qty:
Part #:271920
- M18 FUEL&trade Hackzall® (Tool Only)
The Milwaukee 2719-21 M18&trade FUEL&trade HACKZALL® is the fastest cutting and most powerful one-handed reciprocating saw. Utilizing a POWERSTATE&trade Brushless Motor and a best in class 7/8" stroke length, the M18&trade FUEL&trade HACKZALL® cuts up to 50% faster than competitors. The compact, one-handed design provides superior control and the ability to make cuts in tight spaces. The dual gear counter balance mechanism provides up to 4x lower vibration than traditional reciprocating saws, resulting in faster cut-starts in metal and reduced user fatigue. REDLINK PLUS&trade Intelligence ensures optimized performance and protects your investment from overload, overheating, and over-discharge. The M18&trade REDLITHIUM&trade XC5.0 Battery Pack provides more work per charge and more work over the life of the pack than competitive batteries. A rubber seal and weep holes provide superior protection against water and debris.
Qty:
Part #:512196
- M18 FUEL&trade 1" High Torque Impact Wrench w/ ONE-KEY&trade Kit
Qty:
Part #:800578
- 9" 14 TPI The Torch&trade SAWZALL® Blades (5 Pk)
The Torch&trade metal-cutting blades with the Double Duty Upgrade&trade feature a tooth form optimized for the longest life and maximum durability. Tough Neck&trade is engineered to protect against tang breakage and delivers the strongest SAWZALL® blade tang on the market. Grid Iron&trade features a stamped honeycomb pattern throughout the body of the blade that greatly increases the rigidity of the blade, making it the stiffest metal cutting SAWZALL® blade on the market. These blades are ideal for making tough, straight cuts.
Qty:
Part #:841-175-09001W
- Ideal as a semi-permanent lifting point
for rigging operations (vertical or
horizontal), as a hoisting anchor,
or as a tool for positioning and holding
beams for welding. The Beam Clamp
is recommended for commercial,
construction and industrial applications. SPECIFICATIONS
2,000 to 20,000 lb. CAPACITIES
I-BEAM WIDTHS FROM 3 to 12.2 in.
$
153.00
Qty:
Part #:841-175-09004W
- Ideal as a semi-permanent lifting point
for rigging operations (vertical or
horizontal), as a hoisting anchor,
or as a tool for positioning and holding
beams for welding. The Beam Clamp
is recommended for commercial,
construction and industrial applications. SPECIFICATIONS
2,000 to 20,000 lb. CAPACITIES
I-BEAM WIDTHS FROM 3 to 12.2 in.
$
333.00
Qty:
Part #:841-175-2214A
- SERIES 622
MODEL 622-A
1/2 TO 5 TON CAPACITIES
STANDARD LIFTS UP TO 30 FT.
HAND CHAIN HOIST. The CM Series 622 hand chain hoist features
a simple, efficient and economical design. With an ultra-low-headroom profile and lightweight steel construction, the CM 622 is easy to install, even in confined spaces. Redesigned for optimal performance, this hoist requires even less pull force for operation and has larger hook throat openings for easier attachment.
$
1,359.29
Qty:
Part #:841-175-2234A
- SERIES 622
MODEL 622-A
1/2 TO 5 TON CAPACITIES
STANDARD LIFTS UP TO 30 FT.
HAND CHAIN HOIST. The CM Series 622 hand chain hoist features
a simple, efficient and economical design. With an ultra-low-headroom profile and lightweight steel construction, the CM 622 is easy to install, even in confined spaces. Redesigned for optimal performance, this hoist requires even less pull force for operation and has larger hook throat openings for easier attachment.
$
2,845.58
Qty:
Part #:841-175-2262
- SERIES 622
MODEL 622-A
1/2 TO 5 TON CAPACITIES
STANDARD LIFTS UP TO 30 FT.
HAND CHAIN HOIST. The CM Series 622 hand chain hoist features
a simple, efficient and economical design. With an ultra-low-headroom profile and lightweight steel construction, the CM 622 is easy to install, even in confined spaces. Redesigned for optimal performance, this hoist requires even less pull force for operation and has larger hook throat openings for easier attachment.
$
695.27
Qty:
$
1,816.61
Qty:
$
2,055.90
Qty:
$
2,355.00
Qty:
$
38.23
Qty:
Part #:841-175-4621
- Cyclone hand chain hoist. Most interchangeability of parts
in the industry
Standard Load Limiter for
simple, automatic overload
protection
Enclosed contoured Westontype
automatic brake for
positive load control
High-efficiency spur gearing for
greater lift with minimum effort
Rugged Hoistaloy chain for
added strength and durability
Fully machined, forged liftwheel
pockets for easier lifting and
smooth free chaining
High-strength aluminum alloy
castings in frame and covers
Inspected over 75 times to meet
or exceed HMI and ASME/ANSI
performance and safety
standards
Standard hand chain drop is 2
feet less than lift, (example 8
foot lift hoist has 6 foot hand
chain drop)
Lifetime warranty
Metric rated
Made in U.S.A.
$
1,954.26
Qty:
Part #:841-175-5624A
- The CM Hurricane 360 is unlike any other hand chain
hoist on the market today. Featuring a one-of-a-kind hand
chain cover, the CM Hurricane 360 provides
flexibility and versatility for challenging applications.
The Hurricanes patented hand chain cover rotates a full
360 degrees, allowing loads to be lifted, positioned or
pulled from virtually any angle even in confined spaces.
It also permits the operator to stand safely away from
the load, helping to prevent accidents and injuries.
$
776.16
Qty:
$
47.49
Qty:
$
19.08
Qty:
$
22.70
Qty:
Part #:841-175-2257
- Country of Origin PEOPLE'S REPUBLIC OF CHINA. HAZMAT Item NO. Special Order Item YES.:
$
2,476.66
Qty:
$
2.30
Qty:
$
1.82
Qty:
Displaying: 49 - 72 of 147 Matching Items