Columbus McKinnon (C-M)
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Brand: Columbus McKinnon (C-M) Crescent Curv-O-Mark
closeout
$36.39 MSRP
$
24.38
Qty:
Part #:501143
- 8" Adjustable Black Oxide Wrench - Carded
Crescent Adjustable Wrenches feature a large knurl for easy adjustment and a tight jaw fit. Its hex jaw design helps reduce slippage and tightly grips the fastener for solid, secure operation, while the corrosion-resistant black oxide finish helps prevent rusting. A wide handle design provides comfort and reduces fatigue during extended use, ideal for both pros and do-it-yourself enthusiasts.
Qty:
Part #:511253
- COO CN Prop 65 :
- WARNING
Qty:
closeout
$25.67 MSRP
$
18.60
Part #:511464
- CLOSEOUTS Only 5 Left!
- 10" Nail Puller (Discontinued being replaced by NPWC10)
Tackle your next renovation or demolition project with the latest innovations from Crescent. Our new tools are designed around powerful innovations that allow the user to attack projects from the best angle, adjust your tool to fit the task at hand, and just get the job done faster and easier than before. This series of tools offers a wide array of demolition and renovation tools. All Crescent pry bars have precision ground edges that make it easier to access tight spaces and help minimize damage to finished areas, as well as a crow bar end with a nail puller slot for standard crow bar use. Durable two-tone dual material grips provide comfort, control, and added safety.
Qty:
closeout
$31.14 MSRP
$
20.86
Qty:
Part #:510621
- 7-1/2" Pocket Wire Rope and Cable Cutter(Replaces 0690TN)
The Crescent wire rope and cable cutter is top-quality and pocket sized for ease of use and portability. Get clean, sharp cuts with minimal distortion to the wire or cable. The spring assisted opening provides quick compound action for quick, efficient cuts.
Qty:
closeout
$39.14 MSRP
$
28.38
Part #:504410
- CLOSEOUTS Only 3 Left!
- (Discontinued being replaced by AC212VS)
Qty:
$
448.55
Qty:
Part #:510283
- CM Series 632
close radius trolley With revolutionary advances, this shorter, more compact
trolley is 50% lighter than competitive trolleys, yet every bit
as tough. Negotiates radius curves as tight as 7 to 10 inches
Made of highest quality rolled steel
Unique double row, ball bearing wheel design
for greater wear capacity
Larger V-bars available for wider flange adjustment
For low headroom applications
Bearings prepacked with lifetime lubricant
Exclusive Dial-Fit collar quickly adapts trolley to
wide range of beams and patented rails
Dust covers shield and protect bearings
Trolleys available for larger beams, rails or tracks
contact CM
Cast iron trolley guards available (except for 3 ton)
Lifetime warranty
Made in U.S.A.
$
588.72
Qty:
Part #:800373
- The CM Puller is designed for heavy-duty construction and industrial
applications. Used to pull, lift, drag or stretch, it features Tough aluminum alloy construction
and powder coat finish
Weatherproof for outdoor service
Simple construction with fewer parts
for ease of maintenance and lower
inventories
Hoistaloy hardened steel link type
load chain for strength, long wear
life and flexibility
Weatherized Weston-type automatic
braking system for positive load
control
Easy, one-hand operation and
control only 58 pounds of pull
required for 34 ton model capacity
Forged upper and lower hooks with
latches standard
Free wheeling for fast and easy
attachment to load
Upper and lower Latchlok hooks
available for all capacities
Optional Load Limiter protection
device stops transmission of lever
forces protecting against dangerous
overload
Optional anchor sling simplifies
attachment to allow anchor
hook to swivel in tight space
applications (34 & 112 ton
units only)
Optional Load Sentry warns of
overload condition
Optional zinc-plated chain available
Unlimited lift
Lifetime warranty
Metric rated
Made in U.S.A.
$
1,005.72
Qty:
Part #:800375
- The CM Puller is designed for heavy-duty construction and industrial
applications. Used to pull, lift, drag or stretch, it features Tough aluminum alloy construction
and powder coat finish
Weatherproof for outdoor service
Simple construction with fewer parts
for ease of maintenance and lower
inventories
Hoistaloy hardened steel link type
load chain for strength, long wear
life and flexibility
Weatherized Weston-type automatic
braking system for positive load
control
Easy, one-hand operation and
control only 58 pounds of pull
required for 34 ton model capacity
Forged upper and lower hooks with
latches standard
Free wheeling for fast and easy
attachment to load
Upper and lower Latchlok hooks
available for all capacities
Optional Load Limiter protection
device stops transmission of lever
forces protecting against dangerous
overload
Optional anchor sling simplifies
attachment to allow anchor
hook to swivel in tight space
applications (34 & 112 ton
units only)
Optional Load Sentry warns of
overload condition
Optional zinc-plated chain available
Unlimited lift
Lifetime warranty
Metric rated
Made in U.S.A.
$
2,130.66
Qty:
Part #:690-AT215SPUD
- 16" Adjustable Black Oxide Construction Wrench
Crescent Adjustable Construction Wrenches feature a round, tapered tang for easy alignment of bolt holes. A large knurl allows for easy adjustment and a tight-fitting hex jaw design reduces slippage and tightly grips the fastener for solid, secure operation. The corrosion-resistant black oxide finish helps prevent rust. This is the ideal wrench for any iron or steel worker's tool box.
Qty:
Part #:800374
- The CM Puller is designed for heavy-duty construction and industrial
applications. Used to pull, lift, drag or stretch, it features Tough aluminum alloy construction
and powder coat finish
Weatherproof for outdoor service
Simple construction with fewer parts
for ease of maintenance and lower
inventories
Hoistaloy hardened steel link type
load chain for strength, long wear
life and flexibility
Weatherized Weston-type automatic
braking system for positive load
control
Easy, one-hand operation and
control only 58 pounds of pull
required for 34 ton model capacity
Forged upper and lower hooks with
latches standard
Free wheeling for fast and easy
attachment to load
Upper and lower Latchlok hooks
available for all capacities
Optional Load Limiter protection
device stops transmission of lever
forces protecting against dangerous
overload
Optional anchor sling simplifies
attachment to allow anchor
hook to swivel in tight space
applications (34 & 112 ton
units only)
Optional Load Sentry warns of
overload condition
Optional zinc-plated chain available
Unlimited lift
Lifetime warranty
Metric rated
Made in U.S.A.
$
1,497.46
Qty:
Part #:510926
- 180 Piece 1/4" and 3/8" Drive 6 Point SAE/Metric Professional Tool Set
Crescent mechanics tools are made from Chrome alloy steel which is specially formulated and heat-treated for high strength and superior resistance to abrasion and corrosion. Wrenches, ratchets, sockets, and drive tools all have a flawless chrome finish to extend tool life. The sockets & the box end of the combination wrenches both feature off-corner loading which reduces fastener rounding. The wide selection of Crescent tools satisfies today&rsquos rigorous mechanics tool demands.
Qty:
Part #:801791
- SERIES 622
MODEL 622-A
1/2 TO 5 TON CAPACITIES
STANDARD LIFTS UP TO 30 FT.
HAND CHAIN HOIST. The CM Series 622 hand chain hoist features
a simple, efficient and economical design. With an ultra-low-headroom profile and lightweight steel construction, the CM 622 is easy to install, even in confined spaces. Redesigned for optimal performance, this hoist requires even less pull force for operation and has larger hook throat openings for easier attachment.
$
392.04
Qty:
Part #:811253
- 21 Piece 3/4" Drive 12 Point Standard SAE Mechanics Tool Set
The CRESCENT mechanic's tool sets are professional tool sets contain tools for industrial jobs. They come with durable, full polish Crestoloy® alloy steel ratchets, drive tools, and sockets that are reliable and resist rust and wear. The blow-molded case has a designated spot for each tool.
Contents
CRW19N
3/4" Drive 45-Tooth Quick Release Round Head Ratchet 20"
CDS100N
3/4" Drive 12 Point Standard SAE Socket 1-7/16"
CDS101N
3/4" Drive 12 Point Standard SAE Socket 1-1/2"
CDS102N
3/4" Drive 12 Point Standard SAE Socket 1-5/8"
CDS104N
3/4" Drive 12 Point Standard SAE Socket 1-3/4"
CDS105N
3/4" Drive 12 Point Standard SAE Socket 1-13/16"
CDS106N
3/4" Drive 12 Point Standard SAE Socket 1-7/8"
CDS107N
3/4" Drive 12 Point Standard SAE Socket 2"
CDS91N
3/4" Drive 12 Point Standard SAE Socket 7/8"
CDS92N
3/4" Drive 12 Point Standard SAE Socket 15/16"
CDS93N
3/4" Drive 12 Point Standard SAE Socket 1"
CDS94N
3/4" Drive 12 Point Standard SAE Socket 1-1/16"
CDS95N
3/4" Drive 12 Point Standard SAE Socket 1-1/8"
CDS97N
3/4" Drive 12 Point Standard SAE Socket 1-1/4"
CDS98N
3/4" Drive 12 Point Standard SAE Socket 1-5/16"
CDS99N
3/4" Drive 12 Point Standard SAE Socket 1-3/8"
CRW20N
3/4" Drive Extension 4"
CRW21N
3/4" Drive Extension 8"
CRW22N
3/4" Drive Extension 16"
CRW23N
3/4" Drive Flex Handle/Breaker Bar 19"
Qty:
Part #:510924
- 70 Piece 1/4" & 3/8" Drive 6 & 12 Point Standard SAE/Metric Mechanics Tool Set
The CRESCENT mechanics tool sets are professional tool sets contain tools for industrial jobs. They come with durable, full polish chrome alloy steel ratchets, drive tools, and sockets that are reliable and resist rust and wear. Also included in the CTK70C are full polish combination wrenches, bits, and hex keys. The heavy-duty blow-molded case with a designated spot for each tool.
Contents
CDS0N
1/4" Drive 6 Point Standard SAE Socket 5/32"
CDS11N
1/4" Drive 6 Point Standard Metric Socket 4mm
CDS12N
1/4" Drive 6 Point Standard Metric Socket 5mm
CDS13N
1/4" Drive 6 Point Standard Metric Socket 6mm
CDS14N
1/4" Drive 6 Point Standard Metric Socket 7mm
CDS15N
1/4" Drive 6 Point Standard Metric Socket 8mm
CDS16N
1/4" Drive 6 Point Standard Metric Socket 9mm
CDS17N
1/4" Drive 6 Point Standard Metric Socket 10mm
CDS18N
1/4" Drive 6 Point Standard Metric Socket 11mm
CDS19N
1/4" Drive 6 Point Standard Metric Socket 12mm
CDS1N
1/4" Drive 6 Point Standard SAE Socket 3/16"
CDS2N
1/4" Drive 6 Point Standard SAE Socket 7/32"
CDS3N
1/4" Drive 6 Point Standard SAE Socket 1/4"
CDS4N
1/4" Drive 6 Point Standard SAE Socket 9/32"
CDS5N
1/4" Drive 6 Point Standard SAE Socket 5/16"
CDS6N
1/4" Drive 6 Point Standard SAE Socket 11/32"
CDS7N
1/4" Drive 6 Point Standard SAE Socket 3/8"
CDS8N
1/4" Drive 6 Point Standard SAE Socket 7/16"
CDS25N
3/8" Drive 12 Point Standard SAE Socket 3/8"
CDS26N
3/8" Drive 12 Point Standard SAE Socket 7/16"
CDS27N
3/8" Drive 12 Point Standard SAE Socket 1/2"
CDS28N
3/8" Drive 12 Point Standard SAE Socket 9/16"
CDS29N
3/8" Drive 12 Point Standard SAE Socket 5/8"
CDS30N
3/8" Drive 12 Point Standard SAE Socket 11/16"
CDS31N
3/8" Drive 12 Point Standard SAE Socket 3/4"
CDS40N
3/8" Drive 12 Point Standard Metric Socket 10mm
CDS41N
3/8" Drive 12 Point Standard Metric Socket 11mm
CDS42N
3/8" Drive 12 Point Standard Metric Socket 12mm
CDS43N
3/8" Drive 12 Point Standard Metric Socket 13mm
CDS44N
3/8" Drive 12 Point Standard Metric Socket 14mm
CDS45N
3/8" Drive 12 Point Standard Metric Socket 15mm
CDS47N
3/8" Drive 12 Point Standard Metric Socket 17mm
CDTA6C
1/4" Drive Extension 2"
CDTA8C
3/8" Drive Extension 3"
CR14
1/4" Drive 72-Tooth Quick Release Teardrop Ratchet 5"
CRW25C
1/4" Drive Dual Material Bit Holding Screwdriver Handle
CR38
3/8" Drive 72-Tooth Quick Release Teardrop Ratchet 8.5"
Qty:
Part #:802163
- CM Series 632
close radius trolley With revolutionary advances, this shorter, more compact
trolley is 50% lighter than competitive trolleys, yet every bit
as tough. Negotiates radius curves as tight as 7 to 10 inches
Made of highest quality rolled steel
Unique double row, ball bearing wheel design
for greater wear capacity
Larger V-bars available for wider flange adjustment
For low headroom applications
Bearings prepacked with lifetime lubricant
Exclusive Dial-Fit collar quickly adapts trolley to
wide range of beams and patented rails
Dust covers shield and protect bearings
Trolleys available for larger beams, rails or tracks
contact CM
Cast iron trolley guards available (except for 3 ton)
Lifetime warranty
Made in U.S.A.
$
699.60
Qty:
Part #:690-CCW11-05
- 7/8" 12 Point Combination Wrench(Replaces CCW11)
The world famous Crescent brand presents our new line of combination wrench sets. These tools have incredible strength and superior resistance to abrasion and corrosion, due to their Crestoloy® alloy steel heat-treated construction. These wrenches meet new ANSI and ASME specifications and come with a full satisfaction guarantee. Crescent - providing quality tools trusted by the trade since 1907.
Qty:
Part #:501142
- 10" Adjustable Wrench - Boxed
Since the introduction of the original Crescent wrench in the early 1900s, the Crescent brand has become synonymous with adjustable wrenches. Crescent Adjustable Wrenches feature a large knurl for easy adjustment and a tight jaw fit. Its hex jaw design helps reduce slippage and tightly grips the fastener for solid, secure operation, while the corrosion-resistant chrome finish helps prevent rusting. A wide handle design provides comfort and reduces fatigue during extended use. The Crescent adjustable wrenches are ideal for both pros and do-it-yourself enthusiasts.
Qty:
Part #:510925
- 150 Piece 1/4" and 3/8" Drive 6 Point SAE/Metric Professional Tool Set
Crescent mechanics tools are made from Chrome alloy steel which is specially formulated and heat-treated for high strength and superior resistance to abrasion and corrosion. Wrenches, ratchets, sockets, and drive tools all have a flawless chrome finish to extend tool life. The sockets & the box end of the combination wrenches both feature off-corner loading which reduces fastener rounding. The wide selection of Crescent tools satisfies today&rsquos rigorous mechanics tool demands.
Qty:
Part #:801783
- SERIES 622
MODEL 622-A
1/2 TO 5 TON CAPACITIES
STANDARD LIFTS UP TO 30 FT.
HAND CHAIN HOIST. The CM Series 622 hand chain hoist features
a simple, efficient and economical design. With an ultra-low-headroom profile and lightweight steel construction, the CM 622 is easy to install, even in confined spaces. Redesigned for optimal performance, this hoist requires even less pull force for operation and has larger hook throat openings for easier attachment.
$
343.44
Qty:
Part #:690-CCW9-05
- 3/4" 12 Point Combination Wrench(Replaces CCW9)
The world famous Crescent brand presents our new line of combination wrench sets. These tools have incredible strength and superior resistance to abrasion and corrosion, due to their Crestoloy® alloy steel heat-treated construction. These wrenches meet new ANSI and ASME specifications and come with a full satisfaction guarantee. Crescent - providing quality tools trusted by the trade since 1907.
Qty:
Displaying: 1 - 24 of 71 Matching Items