Columbus McKinnon (C-M)
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Brand: Columbus McKinnon (C-M) Nicholson Petol Starrett
Part #:506704
- 6" Knife Double/Single Cut Second File with Safe Back
The Crescent Nicholson knife-shaped files have double-cut sides with smooth coarseness for a finer finish, then single-cut teeth down the sharp side for clearing corners or acute angles. The safe back design protects the user and the object you're filing, making this a perfect tool for tool and die makers who can utilize the triangular shape.
Qty:
Part #:802847
- 6" Flat Double Cut Smooth File - Boxed
The Crescent Nicholson flat double cut bastard files with an American pattern are ideal for machinists, machinery builders, ship and engine builders. The files can be used effectively by repairmen and others who require rapid removal of metal. The rectangular cross section allows you to smooth and sharpen straight surfaces, while slight taper in width towards the file's point creates ease of access in slots.
Qty:
Part #:808456
- 6" Half Round Double Cut Smooth File - Boxed
The Crescent Nicholson half-round double-cut bastard files are ideal for materials containing iron, mild steel, plastics, and wood. The coarse grade is perfect for use on concave, convex, and flat surfaces. The two-sided files are rounded on 1 side and flat on the other, so you can round out holes with ease. Half-round bastard files are double-cut on the rounded sides, allowing you to quickly remove material from the work piece.
Qty:
Part #:808400
- 12" Flat Double Cut Smooth File - Boxed
The Crescent Nicholson flat double cut bastard files with an American pattern are ideal for machinists, machinery builders, ship and engine builders. The files can be used effectively by repairmen and others who require rapid removal of metal. The rectangular cross section allows you to smooth and sharpen straight surfaces, while slight taper in width towards the file's point creates ease of access in slots.
Qty:
$
448.55
Qty:
Part #:510283
- CM Series 632
close radius trolley With revolutionary advances, this shorter, more compact
trolley is 50% lighter than competitive trolleys, yet every bit
as tough. Negotiates radius curves as tight as 7 to 10 inches
Made of highest quality rolled steel
Unique double row, ball bearing wheel design
for greater wear capacity
Larger V-bars available for wider flange adjustment
For low headroom applications
Bearings prepacked with lifetime lubricant
Exclusive Dial-Fit collar quickly adapts trolley to
wide range of beams and patented rails
Dust covers shield and protect bearings
Trolleys available for larger beams, rails or tracks
contact CM
Cast iron trolley guards available (except for 3 ton)
Lifetime warranty
Made in U.S.A.
$
588.72
Qty:
Part #:800373
- The CM Puller is designed for heavy-duty construction and industrial
applications. Used to pull, lift, drag or stretch, it features Tough aluminum alloy construction
and powder coat finish
Weatherproof for outdoor service
Simple construction with fewer parts
for ease of maintenance and lower
inventories
Hoistaloy hardened steel link type
load chain for strength, long wear
life and flexibility
Weatherized Weston-type automatic
braking system for positive load
control
Easy, one-hand operation and
control only 58 pounds of pull
required for 34 ton model capacity
Forged upper and lower hooks with
latches standard
Free wheeling for fast and easy
attachment to load
Upper and lower Latchlok hooks
available for all capacities
Optional Load Limiter protection
device stops transmission of lever
forces protecting against dangerous
overload
Optional anchor sling simplifies
attachment to allow anchor
hook to swivel in tight space
applications (34 & 112 ton
units only)
Optional Load Sentry warns of
overload condition
Optional zinc-plated chain available
Unlimited lift
Lifetime warranty
Metric rated
Made in U.S.A.
$
1,005.72
Qty:
Part #:800375
- The CM Puller is designed for heavy-duty construction and industrial
applications. Used to pull, lift, drag or stretch, it features Tough aluminum alloy construction
and powder coat finish
Weatherproof for outdoor service
Simple construction with fewer parts
for ease of maintenance and lower
inventories
Hoistaloy hardened steel link type
load chain for strength, long wear
life and flexibility
Weatherized Weston-type automatic
braking system for positive load
control
Easy, one-hand operation and
control only 58 pounds of pull
required for 34 ton model capacity
Forged upper and lower hooks with
latches standard
Free wheeling for fast and easy
attachment to load
Upper and lower Latchlok hooks
available for all capacities
Optional Load Limiter protection
device stops transmission of lever
forces protecting against dangerous
overload
Optional anchor sling simplifies
attachment to allow anchor
hook to swivel in tight space
applications (34 & 112 ton
units only)
Optional Load Sentry warns of
overload condition
Optional zinc-plated chain available
Unlimited lift
Lifetime warranty
Metric rated
Made in U.S.A.
$
2,130.66
Qty:
Part #:800374
- The CM Puller is designed for heavy-duty construction and industrial
applications. Used to pull, lift, drag or stretch, it features Tough aluminum alloy construction
and powder coat finish
Weatherproof for outdoor service
Simple construction with fewer parts
for ease of maintenance and lower
inventories
Hoistaloy hardened steel link type
load chain for strength, long wear
life and flexibility
Weatherized Weston-type automatic
braking system for positive load
control
Easy, one-hand operation and
control only 58 pounds of pull
required for 34 ton model capacity
Forged upper and lower hooks with
latches standard
Free wheeling for fast and easy
attachment to load
Upper and lower Latchlok hooks
available for all capacities
Optional Load Limiter protection
device stops transmission of lever
forces protecting against dangerous
overload
Optional anchor sling simplifies
attachment to allow anchor
hook to swivel in tight space
applications (34 & 112 ton
units only)
Optional Load Sentry warns of
overload condition
Optional zinc-plated chain available
Unlimited lift
Lifetime warranty
Metric rated
Made in U.S.A.
$
1,497.46
Qty:
Part #:503465
- 8" Square Double Cut Bastard File
The Crescent Nicholson American pattern square, double cut file features a square design with teeth all the way around. These files can be used on slots, keyways, or just for general surface filing. The double-cut construction allows for faster material removal from the workpiece. The slight taper in width towards the file's point creates ease of access in slots. Crafted from metal, the file's construction offers strength and durability.
Qty:
Part #:503500
- 12" Round Single Cut Second File
The Crescent Nicholson American pattern, round single-cut bastard files features a circular design with teeth all the way around. These files can be used to file circular openings or concave surfaces. The single-cut construction provides light removal of material and slightly smoother edges. The slight taper in width towards the file's point creates ease of access in slots. Crafted from metal, the file's construction offers strength and durability.
Qty:
Part #:505266
- 10" Heavy Duty Hacksaw Frame
The Crescent Nicholson 80952 is a 10" long heavy-duty hacksaw frame designed to hold blades between 10" and 12" long. The high-impact, contoured handle fits comfortably in your hand, and the blade can be adjusted to cut at an angle up to 45° degrees from the centerline.
Qty:
Part #:505992
- 10" Round Single Cut Second File
The Crescent Nicholson American pattern, round single-cut bastard files features a circular design with teeth all the way around. These files can be used to file circular openings or concave surfaces. The single-cut construction provides light removal of material and slightly smoother edges. The slight taper in width towards the file's point creates ease of access in slots. Crafted from metal, the file's construction offers strength and durability.
Qty:
Part #:801791
- SERIES 622
MODEL 622-A
1/2 TO 5 TON CAPACITIES
STANDARD LIFTS UP TO 30 FT.
HAND CHAIN HOIST. The CM Series 622 hand chain hoist features
a simple, efficient and economical design. With an ultra-low-headroom profile and lightweight steel construction, the CM 622 is easy to install, even in confined spaces. Redesigned for optimal performance, this hoist requires even less pull force for operation and has larger hook throat openings for easier attachment.
$
392.04
Qty:
Part #:802840
- 12" Flat Double Cut Bastard File - Boxed
The Crescent Nicholson flat double cut bastard files with an American pattern are ideal for machinists, machinery builders, ship and engine builders. The files can be used effectively by repairmen and others who require rapid removal of metal. The rectangular cross section allows you to smooth and sharpen straight surfaces, while slight taper in width towards the file's point creates ease of access in slots.
Qty:
Part #:808341
- 6" Square Double Cut Bastard File
The Crescent Nicholson American pattern square, double cut file features a square design with teeth all the way around. These files can be used on slots, keyways, or just for general surface filing. The double-cut construction allows for faster material removal from the workpiece. The slight taper in width towards the file's point creates ease of access in slots. Crafted from metal, the file's construction offers strength and durability.
Qty:
Part #:808351
- 6" Round Bastard File
The Crescent Nicholson American pattern, round single-cut bastard files features a circular design with teeth all the way around. These files can be used to file circular openings or concave surfaces. The single-cut construction provides light removal of material and slightly smoother edges. The slight taper in width towards the file's point creates ease of access in slots. Crafted from metal, the file's construction offers strength and durability.
Qty:
Part #:808353
- 8" Round Single Cut Bastard File
The Crescent Nicholson American pattern, round single-cut bastard files features a circular design with teeth all the way around. These files can be used to file circular openings or concave surfaces. The single-cut construction provides light removal of material and slightly smoother edges. The slight taper in width towards the file's point creates ease of access in slots. Crafted from metal, the file's construction offers strength and durability.
Qty:
Part #:808354
- 10" Round Single Cut Bastard File
The Crescent Nicholson American pattern, round single-cut bastard files features a circular design with teeth all the way around. These files can be used to file circular openings or concave surfaces. The single-cut construction provides light removal of material and slightly smoother edges. The slight taper in width towards the file's point creates ease of access in slots. Crafted from metal, the file's construction offers strength and durability.
Qty:
Part #:808355
- 12" Round Single Cut Bastard File
The Crescent Nicholson American pattern, round single-cut bastard files features a circular design with teeth all the way around. These files can be used to file circular openings or concave surfaces. The single-cut construction provides light removal of material and slightly smoother edges. The slight taper in width towards the file's point creates ease of access in slots. Crafted from metal, the file's construction offers strength and durability.
Qty:
Part #:808361
- 6" Half Round Double Cut Bastard File - Boxed
The Crescent Nicholson half-round double-cut bastard files are ideal for materials containing iron, mild steel, plastics, and wood. The coarse grade is perfect for use on concave, convex, and flat surfaces. The two-sided files are rounded on 1 side and flat on the other, so you can round out holes with ease. Half-round bastard files are double-cut on the rounded sides, allowing you to quickly remove material from the work piece.
Qty:
Part #:808362
- 8" Half Round Double Cut Bastard File - Boxed
The Crescent Nicholson half-round double-cut bastard files are ideal for materials containing iron, mild steel, plastics, and wood. The coarse grade is perfect for use on concave, convex, and flat surfaces. The two-sided files are rounded on 1 side and flat on the other, so you can round out holes with ease. Half-round bastard files are double-cut on the rounded sides, allowing you to quickly remove material from the work piece.
Qty:
Part #:808511
- 10" Half Round Double Cut Second File - Boxed
The Crescent Nicholson half-round double-cut bastard files are ideal for materials containing iron, mild steel, plastics, and wood. The coarse grade is perfect for use on concave, convex, and flat surfaces. The two-sided files are rounded on 1 side and flat on the other, so you can round out holes with ease. Half-round bastard files are double-cut on the rounded sides, allowing you to quickly remove material from the work piece.
Qty:
Part #:808395
- 6" Flat Double Cut Bastard File - Boxed
The Crescent Nicholson flat double cut bastard files with an American pattern are ideal for machinists, machinery builders, ship and engine builders. The files can be used effectively by repairmen and others who require rapid removal of metal. The rectangular cross section allows you to smooth and sharpen straight surfaces, while slight taper in width towards the file's point creates ease of access in slots.
Qty:
Displaying: 1 - 24 of 161 Matching Items