Multi-Lok Square Braid
Hex Key Set
View:
Active Filters :
Part #:800024
- ML402 features a blend of synthetic fibers treated with specially formulated lubricants with a saxoline base.
The lubrication formulation makes the extra difference. The ductile nature of the lubricant prevents wicking and provides superior sealability.
The packing is constructed with a Multi-Lok braid and each strand is individually coated with graphite. The packing receives a final secondary surface coating of graphite.
Part #:729-5446-21
- 1-3/4" SDS Max Demolition Hammer
Get best-in-class power and the highest overload protection for the toughest demolition jobs. The SDS-Max Demolition Hammer has a heavy-duty crank piston mechanism that delivers 8.8 ft-lbs of impact energy for hard-hitting performance in any concrete. For lighter applications, the two-speed impact mode allows you to reduce BPM to 2,200. Advanced Constant Power Technology electronics and a mechanical clutch enhance your control and the demolition hammer&rsquos long-term durability. The Anti-Vibration System and side D-handle ensure safe, comfortable use. The tool comes with a carrying case.
Qty:
Part #:801544
- Unlike other PTFE fluorocarbon filament packing, SEPCO prelubricates the fibers of the ML2235 to provide a softer, more flexible packing, with improved peripheral speed characteristics and exothermic properties.
No glazing at higher speed applications, inert, lower coefficient of friction, thermal resistance to 500F/260C and high compressive strength.
Part #:805892
- The SEPCO ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high temperature lubricant is added. The ML2225 is a great general service on rotary and reciprocating pumps, and agitators. Yarns are coated in PTFE suspensoid.This system of impregnation assures even distribution of the PTFE particles, protecting the fibers from chemical action.
Part #:504912
- SDS MAX Scaling Chisel 2" x 12"
Qty:
Part #:504915
- SDS-MAX SLEDGE&trade 3" Scaling Chisel
Milwaukee® SDS Max Chisels are made from high grade, forged steel, providing up to 20% longer life. These chisels are specifically designed for SDS-Max rotary hammers and should be used in hammer only mode.
Qty:
Part #:805372
- SDS-MAX 4CT MX4&trade 1" X 8" X 13"
Our MX4&trade 4-Cutter SDS MAX Rotary Hammer Drill Bits with solid head carbide deliver up to 5x longer life in concrete with rebar. Engineered with guards to provide maximum durability in hard aggregate and rebar. We designed our MX4&trade 4-Cutter bits with sharp centering tips for exact spot drilling in concrete. The integrated 4-cutter design prevents lock-up in rebar, reducing downtime. Variable flutes remove dust faster reducing heat & delivering up to 15% more holes per battery charge. The wear mark indicator on each drill bit shows you when they no longer meet the ANSI requirement. These MILWAUKEE® MX4&trade 4-Cutter Drill Bits are ideal for concrete with rebar and masonry applications. Choose from single bits, bulk packs, or drill bit kits in a variety of sizes. standard chisels
Qty:
Part #:509866
-
TE-YX FM Flat chisels Narrow-Flat Chisel TE-YP FM 28 #2241990
Connection endTE-Y (SDS Max)Length11 inWidth1 inProduct ClassUltimate
$
86.04
Qty:
Part #:800174
- ML4002 is engineered with finely ground particles of the highest quality graphite in a PTFE matrix to control graphite migration. SEPCO ML4002 is 100% GFO fibers with the W. L. Gore seal of approval.
This Comp packing is an excellent, all around packing exhibiting good thermal conductivity characteristics resulting in higher shaft speed, feet-per-minute (fpm) ratings.
Part #:800260
- ML4002 is engineered with finely ground particles of the highest quality graphite in a PTFE matrix to control graphite migration. SEPCO ML4002 is 100% GFO fibers with the W. L. Gore seal of approval.
This Comp packing is an excellent, all around packing exhibiting good thermal conductivity characteristics resulting in higher shaft speed, feet-per-minute (fpm) ratings.
Part #:800545
- Multi-Lok braided high-purity carbon fibers made from a PAN base, with a minimum carbon content of 95.0%. (Staple fibers from PAN produce a more flexible packing than filament fibers, which tends to fracture when bent. Each individual strand is coated with pure PTFE and cured before braiding. During the braiding process, pure PTFE is applied throughout the body of the packing. The packing is lubricated under hydraulic pressure with a proprietary nonpetroleum lubricant, containing no sulfur, silicone, or waxes.
Part #:800546
- Multi-Lok braided high-purity carbon fibers made from a PAN base, with a minimum carbon content of 95.0%. (Staple fibers from PAN produce a more flexible packing than filament fibers, which tends to fracture when bent. Each individual strand is coated with pure PTFE and cured before braiding. During the braiding process, pure PTFE is applied throughout the body of the packing. The packing is lubricated under hydraulic pressure with a proprietary nonpetroleum lubricant, containing no sulfur, silicone, or waxes.
Part #:801543
- Unlike other PTFE fluorocarbon filament packing, SEPCO prelubricates the fibers of the ML2235 to provide a softer, more flexible packing, with improved peripheral speed characteristics and exothermic properties.
No glazing at higher speed applications, inert, lower coefficient of friction, thermal resistance to 500F/260C and high compressive strength.
Part #:801826
- Unlike other PTFE fluorocarbon filament packing, SEPCO prelubricates the fibers of the ML2235 to provide a softer, more flexible packing, with improved peripheral speed characteristics and exothermic properties.
No glazing at higher speed applications, inert, lower coefficient of friction, thermal resistance to 500F/260C and high compressive strength.
Part #:801844
- The SEPCO ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high temperature lubricant is added. The ML2225 is a great general service on rotary and reciprocating pumps, and agitators. Yarns are coated in PTFE suspensoid.This system of impregnation assures even distribution of the PTFE particles, protecting the fibers from chemical action.
Part #:801891
- The SEPCO ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high temperature lubricant is added. The ML2225 is a great general service on rotary and reciprocating pumps, and agitators. Yarns are coated in PTFE suspensoid.This system of impregnation assures even distribution of the PTFE particles, protecting the fibers from chemical action.
Part #:802802
- Unlike other PTFE fluorocarbon filament packing, SEPCO prelubricates the fibers of the ML2235 to provide a softer, more flexible packing, with improved peripheral speed characteristics and exothermic properties.
No glazing at higher speed applications, inert, lower coefficient of friction, thermal resistance to 500F/260C and high compressive strength.
Part #:805001
- Unlike other PTFE fluorocarbon filament packing, SEPCO prelubricates the fibers of the ML2235 to provide a softer, more flexible packing, with improved peripheral speed characteristics and exothermic properties.
No glazing at higher speed applications, inert, lower coefficient of friction, thermal resistance to 500F/260C and high compressive strength.
Part #:805046
- ML402 features a blend of synthetic fibers treated with specially formulated lubricants with a saxoline base.
The lubrication formulation makes the extra difference. The ductile nature of the lubricant prevents wicking and provides superior sealability.
The packing is constructed with a Multi-Lok braid and each strand is individually coated with graphite. The packing receives a final secondary surface coating of graphite.
Part #:805047
- ML402 features a blend of synthetic fibers treated with specially formulated lubricants with a saxoline base.
The lubrication formulation makes the extra difference. The ductile nature of the lubricant prevents wicking and provides superior sealability.
The packing is constructed with a Multi-Lok braid and each strand is individually coated with graphite. The packing receives a final secondary surface coating of graphite.
Part #:805050
- ML402 features a blend of synthetic fibers treated with specially formulated lubricants with a saxoline base.
The lubrication formulation makes the extra difference. The ductile nature of the lubricant prevents wicking and provides superior sealability.
The packing is constructed with a Multi-Lok braid and each strand is individually coated with graphite. The packing receives a final secondary surface coating of graphite.
Part #:805053
- The SEPCO ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high temperature lubricant is added. The ML2225 is a great general service on rotary and reciprocating pumps, and agitators. Yarns are coated in PTFE suspensoid.This system of impregnation assures even distribution of the PTFE particles, protecting the fibers from chemical action.
Part #:805054
- The SEPCO ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high temperature lubricant is added. The ML2225 is a great general service on rotary and reciprocating pumps, and agitators. Yarns are coated in PTFE suspensoid.This system of impregnation assures even distribution of the PTFE particles, protecting the fibers from chemical action.
Part #:805060
- ML402 features a blend of synthetic fibers treated with specially formulated lubricants with a saxoline base.
The lubrication formulation makes the extra difference. The ductile nature of the lubricant prevents wicking and provides superior sealability.
The packing is constructed with a Multi-Lok braid and each strand is individually coated with graphite. The packing receives a final secondary surface coating of graphite.
Displaying: 1 - 24 of 51 Matching Items