Male National Pipe Thread (MNPT)
1-1/2in
View:
Active Filters :
- End Connection: 1-1/2in Male National Pipe Thread (MNPT)
Part #:203960
- Straight Adaptors -22 CTS x MNPT ONE END MALE NATIONAL PIPE THREAD
A.Y. McDonald Service Fittings are manufactured to meet or exceed the AWWA C800 (latest revision) standard. Our service fittings arerated to withstand the same pressures as the tubing they are designed to fit. They are designed and tested for cold potable water only.EPDM rubber gaskets are used in our Compression fittings.
Qty:
Part #:206954
- Straight Ball Valves - Female National Pipe Thread (FNPT) x Female National Pipe Thread (FNPT)
90º ON/OFF TEE OPERATING HEAD FNPT x FNPT
A.Y. McDonald Ball Curb Stops maintain a low turning torque and bubble-tight 300 PSIG water pressure rating due to the PTFE coated brassball that is supported by two blow-out proof EPDM seals. The end piece joint is sealed with an EPDM O-ring and thread locker. McDonaldBall Curb Stops offer positive shut-off from either direction and are available with a wide variety of end connections.
$
460.52
Qty:
Part #:206857
- Straight Ball Valves - Compression 90º DEGREE ON/OFF TEE OPERATING HEAD -22 CTS x -22 CTS
A.Y. McDonald Ball Curb Stops maintain a low turning torque and bubble-tight 300 PSIG water pressure rating due to the PTFE coated brassball that is supported by two blow-out proof EPDM seals. The end piece joint is sealed with an EPDM O-ring and thread locker. McDonaldBall Curb Stops offer positive shut-off from either direction and are available with a wide variety of end connections.
$
669.90
Qty:
Part #:204023
- Plug Style - AWWA Inlets AWWA x -22 CTS
A.Y. McDonald Plug Style Corporation Stops come standard with a 360º operating head. The one piece body and plug are precisionmachined to assure a perfect match between the plug and the body to allow operating pressures of 100 PSI on 1/2&rdquo, 3/4&rdquo and 1&rdquo valvesand 80 PSI on 1 1/4&rdquo, 1 1/2&rdquo and 2&rdquo valves. This same machining precision carries over to the threads to assure A.Y. McDonald&rsquos highquality and compatibility with direct taps and saddle applications.
$
651.14
Qty:
Part #:203895
- Straight Adaptors ONE END FEMALE NATIONAL PIPE THREAD Flare x FNPT
A.Y. McDonald Service Fittings are manufactured to meet or exceed the AWWA C800 (latest revision) standard. Our service fittings arerated to withstand the same pressures as the tubing they are designed to fit. They are designed and tested for cold potable water only.EPDM rubber gaskets are used in our Compression fittings.
Qty:
Part #:203947
- Straight Couplings SAME CONNECTIONS ON BOTH ENDS - NO INTERNAL PIPE STOP ON STRAIGHT SIZES -22 CTS x -22 CTS
A.Y. McDonald Service Fittings are manufactured to meet or exceed the AWWA C800 (latest revision) standard. Our service fittings arerated to withstand the same pressures as the tubing they are designed to fit. They are designed and tested for cold potable water only.EPDM rubber gaskets are used in our Compression fittings.
Qty:
Part #:203887
- Straight Adaptors ONE END FEMALE NATIONAL PIPE THREAD -22 CTS x FNPT
A.Y. McDonald Service Fittings are manufactured to meet or exceed the AWWA C800 (latest revision) standard. Our service fittings arerated to withstand the same pressures as the tubing they are designed to fit. They are designed and tested for cold potable water only.EPDM rubber gaskets are used in our Compression fittings.
Qty:
$
482.00
Qty:
Part #:1267-621-10-1-1-2-6
- ApplicationChemical processingGas pressure measurementOil field & offshoreMiningWell head measurementAdditional InformationNOSHOK 621 and 622 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsExplosion-proof with entity approved for Class I, Division 1, Groups A, B, C and D.Dust Ignition-proof with entity approval for class II/III, Division 1, Groups E, F and G.Maximum electrical ratings 30V, 20 mA.CE compliant with pressure equipment directive 2014/68/EU.ANSI/ISA-12.27.01, Approved single seal.
Qty:
Part #:1267-621-100-1-1-2-37
- ApplicationChemical processingGas pressure measurementOil field & offshoreMiningWell head measurementAdditional InformationNOSHOK 621 and 622 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsExplosion-proof with entity approved for Class I, Division 1, Groups A, B, C and D.Dust Ignition-proof with entity approval for class II/III, Division 1, Groups E, F and G.Maximum electrical ratings 30V, 20 mA.CE compliant with pressure equipment directive 2014/68/EU.ANSI/ISA-12.27.01, Approved single seal.
Qty:
Part #:1267-621-100-1-1-2-6
- ApplicationChemical processingGas pressure measurementOil field & offshoreMiningWell head measurementAdditional InformationNOSHOK 621 and 622 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsExplosion-proof with entity approved for Class I, Division 1, Groups A, B, C and D.Dust Ignition-proof with entity approval for class II/III, Division 1, Groups E, F and G.Maximum electrical ratings 30V, 20 mA.CE compliant with pressure equipment directive 2014/68/EU.ANSI/ISA-12.27.01, Approved single seal.
Qty:
Part #:1267-621-100-1-1-2-6-ST8
- ApplicationChemical processingGas pressure measurementOil field & offshoreMiningWell head measurementAdditional InformationNOSHOK 621 and 622 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsExplosion-proof with entity approved for Class I, Division 1, Groups A, B, C and D.Dust Ignition-proof with entity approval for class II/III, Division 1, Groups E, F and G.Maximum electrical ratings 30V, 20 mA.CE compliant with pressure equipment directive 2014/68/EU.ANSI/ISA-12.27.01, Approved single seal.
Qty:
Part #:1267-621-100-1-1-8-6
- ApplicationChemical processingGas pressure measurementOil field & offshoreMiningWell head measurementAdditional InformationNOSHOK 621 and 622 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsExplosion-proof with entity approved for Class I, Division 1, Groups A, B, C and D.Dust Ignition-proof with entity approval for class II/III, Division 1, Groups E, F and G.Maximum electrical ratings 30V, 20 mA.CE compliant with pressure equipment directive 2014/68/EU.ANSI/ISA-12.27.01, Approved single seal.
Qty:
Part #:1267-621-100-1-3-2-6
- ApplicationChemical processingGas pressure measurementOil field & offshoreMiningWell head measurementAdditional InformationNOSHOK 621 and 622 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsExplosion-proof with entity approved for Class I, Division 1, Groups A, B, C and D.Dust Ignition-proof with entity approval for class II/III, Division 1, Groups E, F and G.Maximum electrical ratings 30V, 20 mA.CE compliant with pressure equipment directive 2014/68/EU.ANSI/ISA-12.27.01, Approved single seal.
Qty:
Part #:1267-621-100-1-3-8-37
- ApplicationChemical processingGas pressure measurementOil field & offshoreMiningWell head measurementAdditional InformationNOSHOK 621 and 622 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsExplosion-proof with entity approved for Class I, Division 1, Groups A, B, C and D.Dust Ignition-proof with entity approval for class II/III, Division 1, Groups E, F and G.Maximum electrical ratings 30V, 20 mA.CE compliant with pressure equipment directive 2014/68/EU.ANSI/ISA-12.27.01, Approved single seal.
Qty:
Part #:1267-621-100-1-3-8-6
- ApplicationChemical processingGas pressure measurementOil field & offshoreMiningWell head measurementAdditional InformationNOSHOK 621 and 622 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsExplosion-proof with entity approved for Class I, Division 1, Groups A, B, C and D.Dust Ignition-proof with entity approval for class II/III, Division 1, Groups E, F and G.Maximum electrical ratings 30V, 20 mA.CE compliant with pressure equipment directive 2014/68/EU.ANSI/ISA-12.27.01, Approved single seal.
Qty:
Part #:1267-621-1000-1-1-2-6
- ApplicationChemical processingGas pressure measurementOil field & offshoreMiningWell head measurementAdditional InformationNOSHOK 621 and 622 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsExplosion-proof with entity approved for Class I, Division 1, Groups A, B, C and D.Dust Ignition-proof with entity approval for class II/III, Division 1, Groups E, F and G.Maximum electrical ratings 30V, 20 mA.CE compliant with pressure equipment directive 2014/68/EU.ANSI/ISA-12.27.01, Approved single seal.
Qty:
Part #:1267-621-1000-1-1-2-6-20
- ApplicationChemical processingGas pressure measurementOil field & offshoreMiningWell head measurementAdditional InformationNOSHOK 621 and 622 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsExplosion-proof with entity approved for Class I, Division 1, Groups A, B, C and D.Dust Ignition-proof with entity approval for class II/III, Division 1, Groups E, F and G.Maximum electrical ratings 30V, 20 mA.CE compliant with pressure equipment directive 2014/68/EU.ANSI/ISA-12.27.01, Approved single seal.
Qty:
Part #:1267-621-1000-1-1-8-6
- ApplicationChemical processingGas pressure measurementOil field & offshoreMiningWell head measurementAdditional InformationNOSHOK 621 and 622 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsExplosion-proof with entity approved for Class I, Division 1, Groups A, B, C and D.Dust Ignition-proof with entity approval for class II/III, Division 1, Groups E, F and G.Maximum electrical ratings 30V, 20 mA.CE compliant with pressure equipment directive 2014/68/EU.ANSI/ISA-12.27.01, Approved single seal.
Qty:
Part #:1267-621-1000-1-3-2-6
- ApplicationChemical processingGas pressure measurementOil field & offshoreMiningWell head measurementAdditional InformationNOSHOK 621 and 622 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsExplosion-proof with entity approved for Class I, Division 1, Groups A, B, C and D.Dust Ignition-proof with entity approval for class II/III, Division 1, Groups E, F and G.Maximum electrical ratings 30V, 20 mA.CE compliant with pressure equipment directive 2014/68/EU.ANSI/ISA-12.27.01, Approved single seal.
Qty:
Part #:1267-621-1000-1-3-8-37
- ApplicationChemical processingGas pressure measurementOil field & offshoreMiningWell head measurementAdditional InformationNOSHOK 621 and 622 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsExplosion-proof with entity approved for Class I, Division 1, Groups A, B, C and D.Dust Ignition-proof with entity approval for class II/III, Division 1, Groups E, F and G.Maximum electrical ratings 30V, 20 mA.CE compliant with pressure equipment directive 2014/68/EU.ANSI/ISA-12.27.01, Approved single seal.
Qty:
Part #:1267-621-1000-1-3-8-6
- ApplicationChemical processingGas pressure measurementOil field & offshoreMiningWell head measurementAdditional InformationNOSHOK 621 and 622 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsExplosion-proof with entity approved for Class I, Division 1, Groups A, B, C and D.Dust Ignition-proof with entity approval for class II/III, Division 1, Groups E, F and G.Maximum electrical ratings 30V, 20 mA.CE compliant with pressure equipment directive 2014/68/EU.ANSI/ISA-12.27.01, Approved single seal.
Qty:
Part #:1267-621-10000-1-1-2-6
- ApplicationChemical processingGas pressure measurementOil field & offshoreMiningWell head measurementAdditional InformationNOSHOK 621 and 622 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsExplosion-proof with entity approved for Class I, Division 1, Groups A, B, C and D.Dust Ignition-proof with entity approval for class II/III, Division 1, Groups E, F and G.Maximum electrical ratings 30V, 20 mA.CE compliant with pressure equipment directive 2014/68/EU.ANSI/ISA-12.27.01, Approved single seal.
Qty:
Part #:1267-621-10000-1-1-2-6-ST8
- ApplicationChemical processingGas pressure measurementOil field & offshoreMiningWell head measurementAdditional InformationNOSHOK 621 and 622 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsExplosion-proof with entity approved for Class I, Division 1, Groups A, B, C and D.Dust Ignition-proof with entity approval for class II/III, Division 1, Groups E, F and G.Maximum electrical ratings 30V, 20 mA.CE compliant with pressure equipment directive 2014/68/EU.ANSI/ISA-12.27.01, Approved single seal.
Qty:
Displaying: 1 - 24 of 451 Matching Items