National Pipe Thread (NPT) Right
Male National Pipe Thread (MNPT)
View:
Active Filters :
- End Connection: Male National Pipe Thread (MNPT) National Pipe Thread (NPT) Right
$
482.00
Qty:
Part #:1267-15-100-30-PSI/KPA-RIGHT
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
Qty:
Part #:1267-621-10-1-1-2-6
- ApplicationChemical processingGas pressure measurementOil field & offshoreMiningWell head measurementAdditional InformationNOSHOK 621 and 622 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsExplosion-proof with entity approved for Class I, Division 1, Groups A, B, C and D.Dust Ignition-proof with entity approval for class II/III, Division 1, Groups E, F and G.Maximum electrical ratings 30V, 20 mA.CE compliant with pressure equipment directive 2014/68/EU.ANSI/ISA-12.27.01, Approved single seal.
Qty:
Part #:1267-621-100-1-1-2-37
- ApplicationChemical processingGas pressure measurementOil field & offshoreMiningWell head measurementAdditional InformationNOSHOK 621 and 622 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsExplosion-proof with entity approved for Class I, Division 1, Groups A, B, C and D.Dust Ignition-proof with entity approval for class II/III, Division 1, Groups E, F and G.Maximum electrical ratings 30V, 20 mA.CE compliant with pressure equipment directive 2014/68/EU.ANSI/ISA-12.27.01, Approved single seal.
Qty:
Part #:1267-621-100-1-1-2-6
- ApplicationChemical processingGas pressure measurementOil field & offshoreMiningWell head measurementAdditional InformationNOSHOK 621 and 622 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsExplosion-proof with entity approved for Class I, Division 1, Groups A, B, C and D.Dust Ignition-proof with entity approval for class II/III, Division 1, Groups E, F and G.Maximum electrical ratings 30V, 20 mA.CE compliant with pressure equipment directive 2014/68/EU.ANSI/ISA-12.27.01, Approved single seal.
Qty:
Part #:1267-621-100-1-1-2-6-ST8
- ApplicationChemical processingGas pressure measurementOil field & offshoreMiningWell head measurementAdditional InformationNOSHOK 621 and 622 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsExplosion-proof with entity approved for Class I, Division 1, Groups A, B, C and D.Dust Ignition-proof with entity approval for class II/III, Division 1, Groups E, F and G.Maximum electrical ratings 30V, 20 mA.CE compliant with pressure equipment directive 2014/68/EU.ANSI/ISA-12.27.01, Approved single seal.
Qty:
Part #:1267-621-100-1-1-8-6
- ApplicationChemical processingGas pressure measurementOil field & offshoreMiningWell head measurementAdditional InformationNOSHOK 621 and 622 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsExplosion-proof with entity approved for Class I, Division 1, Groups A, B, C and D.Dust Ignition-proof with entity approval for class II/III, Division 1, Groups E, F and G.Maximum electrical ratings 30V, 20 mA.CE compliant with pressure equipment directive 2014/68/EU.ANSI/ISA-12.27.01, Approved single seal.
Qty:
Part #:1267-621-100-1-3-2-6
- ApplicationChemical processingGas pressure measurementOil field & offshoreMiningWell head measurementAdditional InformationNOSHOK 621 and 622 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsExplosion-proof with entity approved for Class I, Division 1, Groups A, B, C and D.Dust Ignition-proof with entity approval for class II/III, Division 1, Groups E, F and G.Maximum electrical ratings 30V, 20 mA.CE compliant with pressure equipment directive 2014/68/EU.ANSI/ISA-12.27.01, Approved single seal.
Qty:
Part #:1267-621-100-1-3-8-37
- ApplicationChemical processingGas pressure measurementOil field & offshoreMiningWell head measurementAdditional InformationNOSHOK 621 and 622 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsExplosion-proof with entity approved for Class I, Division 1, Groups A, B, C and D.Dust Ignition-proof with entity approval for class II/III, Division 1, Groups E, F and G.Maximum electrical ratings 30V, 20 mA.CE compliant with pressure equipment directive 2014/68/EU.ANSI/ISA-12.27.01, Approved single seal.
Qty:
Part #:1267-621-100-1-3-8-6
- ApplicationChemical processingGas pressure measurementOil field & offshoreMiningWell head measurementAdditional InformationNOSHOK 621 and 622 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsExplosion-proof with entity approved for Class I, Division 1, Groups A, B, C and D.Dust Ignition-proof with entity approval for class II/III, Division 1, Groups E, F and G.Maximum electrical ratings 30V, 20 mA.CE compliant with pressure equipment directive 2014/68/EU.ANSI/ISA-12.27.01, Approved single seal.
Qty:
Part #:1267-621-1000-1-1-2-6
- ApplicationChemical processingGas pressure measurementOil field & offshoreMiningWell head measurementAdditional InformationNOSHOK 621 and 622 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsExplosion-proof with entity approved for Class I, Division 1, Groups A, B, C and D.Dust Ignition-proof with entity approval for class II/III, Division 1, Groups E, F and G.Maximum electrical ratings 30V, 20 mA.CE compliant with pressure equipment directive 2014/68/EU.ANSI/ISA-12.27.01, Approved single seal.
Qty:
Part #:1267-621-1000-1-1-2-6-20
- ApplicationChemical processingGas pressure measurementOil field & offshoreMiningWell head measurementAdditional InformationNOSHOK 621 and 622 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsExplosion-proof with entity approved for Class I, Division 1, Groups A, B, C and D.Dust Ignition-proof with entity approval for class II/III, Division 1, Groups E, F and G.Maximum electrical ratings 30V, 20 mA.CE compliant with pressure equipment directive 2014/68/EU.ANSI/ISA-12.27.01, Approved single seal.
Qty:
Part #:1267-621-1000-1-1-8-6
- ApplicationChemical processingGas pressure measurementOil field & offshoreMiningWell head measurementAdditional InformationNOSHOK 621 and 622 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsExplosion-proof with entity approved for Class I, Division 1, Groups A, B, C and D.Dust Ignition-proof with entity approval for class II/III, Division 1, Groups E, F and G.Maximum electrical ratings 30V, 20 mA.CE compliant with pressure equipment directive 2014/68/EU.ANSI/ISA-12.27.01, Approved single seal.
Qty:
Part #:1267-621-1000-1-3-2-6
- ApplicationChemical processingGas pressure measurementOil field & offshoreMiningWell head measurementAdditional InformationNOSHOK 621 and 622 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsExplosion-proof with entity approved for Class I, Division 1, Groups A, B, C and D.Dust Ignition-proof with entity approval for class II/III, Division 1, Groups E, F and G.Maximum electrical ratings 30V, 20 mA.CE compliant with pressure equipment directive 2014/68/EU.ANSI/ISA-12.27.01, Approved single seal.
Qty:
Part #:1267-621-1000-1-3-8-37
- ApplicationChemical processingGas pressure measurementOil field & offshoreMiningWell head measurementAdditional InformationNOSHOK 621 and 622 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsExplosion-proof with entity approved for Class I, Division 1, Groups A, B, C and D.Dust Ignition-proof with entity approval for class II/III, Division 1, Groups E, F and G.Maximum electrical ratings 30V, 20 mA.CE compliant with pressure equipment directive 2014/68/EU.ANSI/ISA-12.27.01, Approved single seal.
Qty:
Part #:1267-621-1000-1-3-8-6
- ApplicationChemical processingGas pressure measurementOil field & offshoreMiningWell head measurementAdditional InformationNOSHOK 621 and 622 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsExplosion-proof with entity approved for Class I, Division 1, Groups A, B, C and D.Dust Ignition-proof with entity approval for class II/III, Division 1, Groups E, F and G.Maximum electrical ratings 30V, 20 mA.CE compliant with pressure equipment directive 2014/68/EU.ANSI/ISA-12.27.01, Approved single seal.
Qty:
Part #:1267-621-10000-1-1-2-6
- ApplicationChemical processingGas pressure measurementOil field & offshoreMiningWell head measurementAdditional InformationNOSHOK 621 and 622 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsExplosion-proof with entity approved for Class I, Division 1, Groups A, B, C and D.Dust Ignition-proof with entity approval for class II/III, Division 1, Groups E, F and G.Maximum electrical ratings 30V, 20 mA.CE compliant with pressure equipment directive 2014/68/EU.ANSI/ISA-12.27.01, Approved single seal.
Qty:
Part #:1267-621-10000-1-1-2-6-ST8
- ApplicationChemical processingGas pressure measurementOil field & offshoreMiningWell head measurementAdditional InformationNOSHOK 621 and 622 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsExplosion-proof with entity approved for Class I, Division 1, Groups A, B, C and D.Dust Ignition-proof with entity approval for class II/III, Division 1, Groups E, F and G.Maximum electrical ratings 30V, 20 mA.CE compliant with pressure equipment directive 2014/68/EU.ANSI/ISA-12.27.01, Approved single seal.
Qty:
Part #:1267-621-10000-1-1-8-6
- ApplicationChemical processingGas pressure measurementOil field & offshoreMiningWell head measurementAdditional InformationNOSHOK 621 and 622 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsExplosion-proof with entity approved for Class I, Division 1, Groups A, B, C and D.Dust Ignition-proof with entity approval for class II/III, Division 1, Groups E, F and G.Maximum electrical ratings 30V, 20 mA.CE compliant with pressure equipment directive 2014/68/EU.ANSI/ISA-12.27.01, Approved single seal.
Qty:
Part #:1267-621-10000-1-3-2-6
- ApplicationChemical processingGas pressure measurementOil field & offshoreMiningWell head measurementAdditional InformationNOSHOK 621 and 622 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsExplosion-proof with entity approved for Class I, Division 1, Groups A, B, C and D.Dust Ignition-proof with entity approval for class II/III, Division 1, Groups E, F and G.Maximum electrical ratings 30V, 20 mA.CE compliant with pressure equipment directive 2014/68/EU.ANSI/ISA-12.27.01, Approved single seal.
Qty:
Part #:1267-621-10000-1-3-8-37
- ApplicationChemical processingGas pressure measurementOil field & offshoreMiningWell head measurementAdditional InformationNOSHOK 621 and 622 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsExplosion-proof with entity approved for Class I, Division 1, Groups A, B, C and D.Dust Ignition-proof with entity approval for class II/III, Division 1, Groups E, F and G.Maximum electrical ratings 30V, 20 mA.CE compliant with pressure equipment directive 2014/68/EU.ANSI/ISA-12.27.01, Approved single seal.
Qty:
Part #:1267-621-10000-1-3-8-6
- ApplicationChemical processingGas pressure measurementOil field & offshoreMiningWell head measurementAdditional InformationNOSHOK 621 and 622 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsExplosion-proof with entity approved for Class I, Division 1, Groups A, B, C and D.Dust Ignition-proof with entity approval for class II/III, Division 1, Groups E, F and G.Maximum electrical ratings 30V, 20 mA.CE compliant with pressure equipment directive 2014/68/EU.ANSI/ISA-12.27.01, Approved single seal.
Qty:
Part #:1267-621-15-1-1-2-6
- ApplicationChemical processingGas pressure measurementOil field & offshoreMiningWell head measurementAdditional InformationNOSHOK 621 and 622 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsExplosion-proof with entity approved for Class I, Division 1, Groups A, B, C and D.Dust Ignition-proof with entity approval for class II/III, Division 1, Groups E, F and G.Maximum electrical ratings 30V, 20 mA.CE compliant with pressure equipment directive 2014/68/EU.ANSI/ISA-12.27.01, Approved single seal.
Qty:
Part #:1267-621-15-1-1-8-6
- ApplicationChemical processingGas pressure measurementOil field & offshoreMiningWell head measurementAdditional InformationNOSHOK 621 and 622 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsExplosion-proof with entity approved for Class I, Division 1, Groups A, B, C and D.Dust Ignition-proof with entity approval for class II/III, Division 1, Groups E, F and G.Maximum electrical ratings 30V, 20 mA.CE compliant with pressure equipment directive 2014/68/EU.ANSI/ISA-12.27.01, Approved single seal.
Qty:
Displaying: 1 - 24 of 444 Matching Items