Rail and Clips
Acrylonitrile Butadiene Styrene (ABS)
View:
Active Filters :
- Case Material: Acrylonitrile Butadiene Styrene (ABS) Rail and Clips
Part #:508193
- 10 pc 3/8" Drive 6-Point SAE Shallow Socket Set on Rail and Clips
SUPERTORQUE lobular openings for greater turning power without deforming the fastener
Designed for maximum engagement on 6 point fasteners
Qty:
Part #:517891
- 10 pc 3/8" Drive -Point SAE Bit Standard Hex Bit Socket Set on Rail and Clips
High-polished chrome finish socket cleans easily
Two piece design allows bits to be replaced easily
Qty:
Part #:501334
- 11 pc 1/2" Drive 6-Point SAE Deep Socket Set on Rail and Clips
&bull SUPERTORQUE® lobular openings for greater turning power without deforming the fastener
&bull Designed for maximum engagement on 6 point fasteners
Qty:
Part #:504456
- 11 pc 1/2" Drive 8-Point SAE Deep Socket Set on Rail and Clips
SUPERTORQUE lobular openings for greater turning power without deforming the fastener
Designed for quick engagement on both 6 and 12 point fasteners
Qty:
Part #:501332
- 14 pc 1/2" Drive 6-Point SAE Shallow Socket Set on Rail and Clips
&bull SUPERTORQUE® lobular openings for greater turning power without deforming the fastener
&bull Designed for maximum engagement on 6 point fasteners
Qty:
Part #:509397
- 14 pc 1/2" Drive 6-Point SAE Deep Impact Socket Set on Rail and Clips
&bull SUPERTORQUE® lobular openings for greater turning power without deforming the fastener
&bull Designed for maximu
m engagement on 6 point fasteners
&bull Suitable for use with pneumatic and electric impact wrenches
&bull Specially heat treated for impact use to provide long life, safety, and durability
Qty:
Part #:507400
-
8 pc 3/4" Drive 6-Point SAE Deep Socket Set on Rail and Clips &bull SUPERTORQUE® lobular openings for greater turning power without deforming the fastener &bull Designed for maximum engagement on 6 point fasteners &bull Suitable for use with pneumatic and electric impact wrenches &bull Specially heat treated for impact use to provide long life, safety, and durability
Qty:
Part #:508187
-
17 pc 3/8" Drive 12-Point Metric Shallow Set Socket on Rail and Clips &bull SUPERTORQUE® lobular openings for greater turning power without deforming the fastener &bull Designed for quick engagement on both 6 and 12 point fasteners
Qty:
Part #:517892
- 7 pc 3/8" Drive -Point SAE Bit Long Hex Bit Socket Set on Rail and Clips
High-polished chrome finish socket cleans easily
Two piece design allows bits to be replaced easily
Qty:
Part #:504930
- 9 pc 3/8" Drive 12-Point SAE Deep Socket Set on Rail and Clips
SUPERTORQUE lobular openings for greater turning power without deforming the fastener
Designed for quick engagement on both 6 and 12-point fasteners
Qty:
Part #:1267-15-100-100-PSI/BAR
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
Qty:
Part #:1267-15-100-100-PSI/KG/CM2
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
Qty:
Part #:1267-15-100-100-PSI/KPA
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
Qty:
Part #:1267-15-100-15-PSI/KPA
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
Qty:
Part #:1267-15-100-160-PSI/BAR
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
Qty:
Part #:1267-15-100-160-PSI/KG/CM2
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
Qty:
Part #:1267-15-100-160-PSI/KPA
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
Qty:
Part #:1267-15-100-200-PSI/BAR
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
Qty:
Part #:1267-15-100-200-PSI/KG/CM2
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
Qty:
Part #:1267-15-100-200-PSI/KPA
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
Qty:
Part #:1267-15-100-30-PSI/BAR
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
Qty:
Part #:1267-15-100-30-PSI/KG/CM2
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
Qty:
Part #:1267-15-100-30-PSI/KPA
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
Qty:
Part #:1267-15-100-30-PSI/KPA-LEFT
- ApplicationHydraulics & pneumaticsMedicalPumps & compressorsRefrigeration controlsUtilitiesWater managementAdditional InformationGeneral purpose non-fillable dry gaugeVacuum and compound ranges through 0 psi to 15,000 psiStandard impact-resistant ABS & Steel caseCopper alloy and Brass wetted partsLimitations Which Apply AreBourdon tube pressure gauges must be used within their calibrated maximum range to prevent damageThe pressure gauges must be operated within the following working pressure limitsDynamic Pressure application, 60% of the dial rangeStatic Pressure applications, where no sharp fluctuations occur, 90% of the dial rangeThe gauges must be operated within specified ambient temperature rangesDetermination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
Qty:
Displaying: 1 - 24 of 292 Matching Items