Insert Barb x MIP
1/2 in. Male National Pipe Thread (MNPT)
View:
Active Filters :
- End Connection: 1/2 in. Male National Pipe Thread (MNPT) Insert Barb x MIP
Part #:104161
- The PVC Barbed-Insert Fitting of Choice. Engineered to provide positive grip and ease of
installation. High quality and reliability have made
Spears insert fi ttings the preferred choice for
irrigation and O.E.M. applications. A wide variety of
PVC insert confi gurations and adapters are available
for use with polyethylene pipe sizes 1/2" through 4",
plus 6" & 8" Couplings and Adapters for lay-fl at type
irrigation hose. Special 3/8" barbed confi gurations in
PVC and PP allow clamp-free connection to 1/2" I.D.
polyethylene irrigation hose.
Qty:
Part #:104162
- The PVC Barbed-Insert Fitting of Choice. Engineered to provide positive grip and ease of installation. High quality and reliability have made Spears® insert fi ttings the preferred choice for irrigation and O.E.M. applications. A wide variety of PVC insert confi gurations and adapters are available for use with polyethylene pipe sizes 1/2" through 4", plus 6" & 8" Couplings and Adapters for lay-fl at type irrigation hose. Special 3/8" barbed confi gurations in PVC and PP allow clamp-free connection to 1/2" I.D. polyethylene irrigation hose.
Qty:
Part #:104163
- The PVC Barbed-Insert Fitting of Choice. Engineered to provide positive grip and ease of
installation. High quality and reliability have made
Spears insert fi ttings the preferred choice for
irrigation and O.E.M. applications. A wide variety of
PVC insert confi gurations and adapters are available
for use with polyethylene pipe sizes 1/2" through 4",
plus 6" & 8" Couplings and Adapters for lay-fl at type
irrigation hose. Special 3/8" barbed confi gurations in
PVC and PP allow clamp-free connection to 1/2" I.D.
polyethylene irrigation hose.
Qty:
Part #:100457
- The PVC Barbed-Insert Fitting of Choice. Engineered to provide positive grip and ease of
installation. High quality and reliability have made
Spears insert fi ttings the preferred choice for
irrigation and O.E.M. applications. A wide variety of
PVC insert confi gurations and adapters are available
for use with polyethylene pipe sizes 1/2" through 4",
plus 6" & 8" Couplings and Adapters for lay-fl at type
irrigation hose. Special 3/8" barbed confi gurations in
PVC and PP allow clamp-free connection to 1/2" I.D.
polyethylene irrigation hose.
Qty:
Part #:104160
- The PVC Barbed-Insert Fitting of Choice. Engineered to provide positive grip and ease of
installation. High quality and reliability have made
Spears insert fi ttings the preferred choice for
irrigation and O.E.M. applications. A wide variety of
PVC insert confi gurations and adapters are available
for use with polyethylene pipe sizes 1/2" through 4",
plus 6" & 8" Couplings and Adapters for lay-fl at type
irrigation hose. Special 3/8" barbed confi gurations in
PVC and PP allow clamp-free connection to 1/2" I.D.
polyethylene irrigation hose.
Qty:
Part #:104164
- The PVC Barbed-Insert Fitting of Choice. Engineered to provide positive grip and ease of
installation. High quality and reliability have made
Spears insert fi ttings the preferred choice for
irrigation and O.E.M. applications. A wide variety of
PVC insert confi gurations and adapters are available
for use with polyethylene pipe sizes 1/2" through 4",
plus 6" & 8" Couplings and Adapters for lay-fl at type
irrigation hose. Special 3/8" barbed confi gurations in
PVC and PP allow clamp-free connection to 1/2" I.D.
polyethylene irrigation hose.
Qty:
Part #:104165
- The PVC Barbed-Insert Fitting of Choice. Engineered to provide positive grip and ease of
installation. High quality and reliability have made
Spears insert fi ttings the preferred choice for
irrigation and O.E.M. applications. A wide variety of
PVC insert confi gurations and adapters are available
for use with polyethylene pipe sizes 1/2" through 4",
plus 6" & 8" Couplings and Adapters for lay-fl at type
irrigation hose. Special 3/8" barbed confi gurations in
PVC and PP allow clamp-free connection to 1/2" I.D.
polyethylene irrigation hose.
Qty:
Part #:100452
- The PVC Barbed-Insert Fitting of Choice. Engineered to provide positive grip and ease of
installation. High quality and reliability have made
Spears insert fi ttings the preferred choice for
irrigation and O.E.M. applications. A wide variety of
PVC insert confi gurations and adapters are available
for use with polyethylene pipe sizes 1/2" through 4",
plus 6" & 8" Couplings and Adapters for lay-fl at type
irrigation hose. Special 3/8" barbed confi gurations in
PVC and PP allow clamp-free connection to 1/2" I.D.
polyethylene irrigation hose.
Qty:
Part #:708642
- The PVC Barbed-Insert Fitting of Choice. Engineered to provide positive grip and ease of
installation. High quality and reliability have made
Spears insert fi ttings the preferred choice for
irrigation and O.E.M. applications. A wide variety of
PVC insert confi gurations and adapters are available
for use with polyethylene pipe sizes 1/2" through 4",
plus 6" & 8" Couplings and Adapters for lay-fl at type
irrigation hose. Special 3/8" barbed confi gurations in
PVC and PP allow clamp-free connection to 1/2" I.D.
polyethylene irrigation hose.
Qty:
Part #:1267-625-100-1-1-8-8
- Additional InformationFactory Mutual and Canadian Standards Association approvedCE compliant to suppress RFI, EMI and ESDNSI/ISA-12.27.01 approved single sealNOSHOK 625 and 626 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsIntrinsically Safe, entity approval for Class I, II and III, Division 1, Groups A, B, C, D, E, F and G and Class I, Zone 0 Aex ia IICDust Ignition-proof for Class II and III, Division 2, Groups F and GNon-incendive for Class I, Division 2, Groups A, B, C and D.CE compliant with pressure equipment directive 2014/68/EU. ANSI/ISA-12.27.01, Approved single seal.Ideal for applications including chemical processing, gas pressure measurement, oil field & offshore, mining, vapory recovery systems, well head measurementLimitations Which Apply AreThese units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation.In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
Qty:
Part #:1267-625-1000-1-1-8-3
- Additional InformationFactory Mutual and Canadian Standards Association approvedCE compliant to suppress RFI, EMI and ESDNSI/ISA-12.27.01 approved single sealNOSHOK 625 and 626 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsIntrinsically Safe, entity approval for Class I, II and III, Division 1, Groups A, B, C, D, E, F and G and Class I, Zone 0 Aex ia IICDust Ignition-proof for Class II and III, Division 2, Groups F and GNon-incendive for Class I, Division 2, Groups A, B, C and D.CE compliant with pressure equipment directive 2014/68/EU. ANSI/ISA-12.27.01, Approved single seal.Ideal for applications including chemical processing, gas pressure measurement, oil field & offshore, mining, vapory recovery systems, well head measurementLimitations Which Apply AreThese units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation.In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
Qty:
Part #:1267-625-1000-1-1-8-8
- Additional InformationFactory Mutual and Canadian Standards Association approvedCE compliant to suppress RFI, EMI and ESDNSI/ISA-12.27.01 approved single sealNOSHOK 625 and 626 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsIntrinsically Safe, entity approval for Class I, II and III, Division 1, Groups A, B, C, D, E, F and G and Class I, Zone 0 Aex ia IICDust Ignition-proof for Class II and III, Division 2, Groups F and GNon-incendive for Class I, Division 2, Groups A, B, C and D.CE compliant with pressure equipment directive 2014/68/EU. ANSI/ISA-12.27.01, Approved single seal.Ideal for applications including chemical processing, gas pressure measurement, oil field & offshore, mining, vapory recovery systems, well head measurementLimitations Which Apply AreThese units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation.In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
Qty:
Part #:1267-625-10000-1-1-8-8
- Additional InformationFactory Mutual and Canadian Standards Association approvedCE compliant to suppress RFI, EMI and ESDNSI/ISA-12.27.01 approved single sealNOSHOK 625 and 626 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsIntrinsically Safe, entity approval for Class I, II and III, Division 1, Groups A, B, C, D, E, F and G and Class I, Zone 0 Aex ia IICDust Ignition-proof for Class II and III, Division 2, Groups F and GNon-incendive for Class I, Division 2, Groups A, B, C and D.CE compliant with pressure equipment directive 2014/68/EU. ANSI/ISA-12.27.01, Approved single seal.Ideal for applications including chemical processing, gas pressure measurement, oil field & offshore, mining, vapory recovery systems, well head measurementLimitations Which Apply AreThese units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation.In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
Qty:
Part #:1267-625-12OZ/IN2-1-1-8-8
- Additional InformationFactory Mutual and Canadian Standards Association approvedCE compliant to suppress RFI, EMI and ESDNSI/ISA-12.27.01 approved single sealNOSHOK 625 and 626 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsIntrinsically Safe, entity approval for Class I, II and III, Division 1, Groups A, B, C, D, E, F and G and Class I, Zone 0 Aex ia IICDust Ignition-proof for Class II and III, Division 2, Groups F and GNon-incendive for Class I, Division 2, Groups A, B, C and D.CE compliant with pressure equipment directive 2014/68/EU. ANSI/ISA-12.27.01, Approved single seal.Ideal for applications including chemical processing, gas pressure measurement, oil field & offshore, mining, vapory recovery systems, well head measurementLimitations Which Apply AreThese units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation.In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
Qty:
Part #:1267-625-15-1-1-8-14
- Additional InformationFactory Mutual and Canadian Standards Association approvedCE compliant to suppress RFI, EMI and ESDNSI/ISA-12.27.01 approved single sealNOSHOK 625 and 626 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsIntrinsically Safe, entity approval for Class I, II and III, Division 1, Groups A, B, C, D, E, F and G and Class I, Zone 0 Aex ia IICDust Ignition-proof for Class II and III, Division 2, Groups F and GNon-incendive for Class I, Division 2, Groups A, B, C and D.CE compliant with pressure equipment directive 2014/68/EU. ANSI/ISA-12.27.01, Approved single seal.Ideal for applications including chemical processing, gas pressure measurement, oil field & offshore, mining, vapory recovery systems, well head measurementLimitations Which Apply AreThese units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation.In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
Qty:
Part #:1267-625-15-1-1-8-8
- Additional InformationFactory Mutual and Canadian Standards Association approvedCE compliant to suppress RFI, EMI and ESDNSI/ISA-12.27.01 approved single sealNOSHOK 625 and 626 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsIntrinsically Safe, entity approval for Class I, II and III, Division 1, Groups A, B, C, D, E, F and G and Class I, Zone 0 Aex ia IICDust Ignition-proof for Class II and III, Division 2, Groups F and GNon-incendive for Class I, Division 2, Groups A, B, C and D.CE compliant with pressure equipment directive 2014/68/EU. ANSI/ISA-12.27.01, Approved single seal.Ideal for applications including chemical processing, gas pressure measurement, oil field & offshore, mining, vapory recovery systems, well head measurementLimitations Which Apply AreThese units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation.In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
Qty:
Part #:1267-625-15-2-1-8-8
- Additional InformationFactory Mutual and Canadian Standards Association approvedCE compliant to suppress RFI, EMI and ESDNSI/ISA-12.27.01 approved single sealNOSHOK 625 and 626 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsIntrinsically Safe, entity approval for Class I, II and III, Division 1, Groups A, B, C, D, E, F and G and Class I, Zone 0 Aex ia IICDust Ignition-proof for Class II and III, Division 2, Groups F and GNon-incendive for Class I, Division 2, Groups A, B, C and D.CE compliant with pressure equipment directive 2014/68/EU. ANSI/ISA-12.27.01, Approved single seal.Ideal for applications including chemical processing, gas pressure measurement, oil field & offshore, mining, vapory recovery systems, well head measurementLimitations Which Apply AreThese units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation.In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
Qty:
Part #:1267-625-150-1-1-8-1
- Additional InformationFactory Mutual and Canadian Standards Association approvedCE compliant to suppress RFI, EMI and ESDNSI/ISA-12.27.01 approved single sealNOSHOK 625 and 626 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsIntrinsically Safe, entity approval for Class I, II and III, Division 1, Groups A, B, C, D, E, F and G and Class I, Zone 0 Aex ia IICDust Ignition-proof for Class II and III, Division 2, Groups F and GNon-incendive for Class I, Division 2, Groups A, B, C and D.CE compliant with pressure equipment directive 2014/68/EU. ANSI/ISA-12.27.01, Approved single seal.Ideal for applications including chemical processing, gas pressure measurement, oil field & offshore, mining, vapory recovery systems, well head measurementLimitations Which Apply AreThese units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation.In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
Qty:
Part #:1267-625-150-1-1-8-8
- Additional InformationFactory Mutual and Canadian Standards Association approvedCE compliant to suppress RFI, EMI and ESDNSI/ISA-12.27.01 approved single sealNOSHOK 625 and 626 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsIntrinsically Safe, entity approval for Class I, II and III, Division 1, Groups A, B, C, D, E, F and G and Class I, Zone 0 Aex ia IICDust Ignition-proof for Class II and III, Division 2, Groups F and GNon-incendive for Class I, Division 2, Groups A, B, C and D.CE compliant with pressure equipment directive 2014/68/EU. ANSI/ISA-12.27.01, Approved single seal.Ideal for applications including chemical processing, gas pressure measurement, oil field & offshore, mining, vapory recovery systems, well head measurementLimitations Which Apply AreThese units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation.In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
Qty:
Part #:1267-625-15000-1-1-8-8
- Additional InformationFactory Mutual and Canadian Standards Association approvedCE compliant to suppress RFI, EMI and ESDNSI/ISA-12.27.01 approved single sealNOSHOK 625 and 626 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsIntrinsically Safe, entity approval for Class I, II and III, Division 1, Groups A, B, C, D, E, F and G and Class I, Zone 0 Aex ia IICDust Ignition-proof for Class II and III, Division 2, Groups F and GNon-incendive for Class I, Division 2, Groups A, B, C and D.CE compliant with pressure equipment directive 2014/68/EU. ANSI/ISA-12.27.01, Approved single seal.Ideal for applications including chemical processing, gas pressure measurement, oil field & offshore, mining, vapory recovery systems, well head measurementLimitations Which Apply AreThese units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation.In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
Qty:
Part #:1267-625-150A-1-1-8-8
- Additional InformationFactory Mutual and Canadian Standards Association approvedCE compliant to suppress RFI, EMI and ESDNSI/ISA-12.27.01 approved single sealNOSHOK 625 and 626 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsIntrinsically Safe, entity approval for Class I, II and III, Division 1, Groups A, B, C, D, E, F and G and Class I, Zone 0 Aex ia IICDust Ignition-proof for Class II and III, Division 2, Groups F and GNon-incendive for Class I, Division 2, Groups A, B, C and D.CE compliant with pressure equipment directive 2014/68/EU. ANSI/ISA-12.27.01, Approved single seal.Ideal for applications including chemical processing, gas pressure measurement, oil field & offshore, mining, vapory recovery systems, well head measurementLimitations Which Apply AreThese units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation.In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
Qty:
Part #:1267-625-16OZ/IN2-1-1-8-1
- Additional InformationFactory Mutual and Canadian Standards Association approvedCE compliant to suppress RFI, EMI and ESDNSI/ISA-12.27.01 approved single sealNOSHOK 625 and 626 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsIntrinsically Safe, entity approval for Class I, II and III, Division 1, Groups A, B, C, D, E, F and G and Class I, Zone 0 Aex ia IICDust Ignition-proof for Class II and III, Division 2, Groups F and GNon-incendive for Class I, Division 2, Groups A, B, C and D.CE compliant with pressure equipment directive 2014/68/EU. ANSI/ISA-12.27.01, Approved single seal.Ideal for applications including chemical processing, gas pressure measurement, oil field & offshore, mining, vapory recovery systems, well head measurementLimitations Which Apply AreThese units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation.In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
Qty:
Part #:1267-625-16OZ/IN2-1-1-8-8
- Additional InformationFactory Mutual and Canadian Standards Association approvedCE compliant to suppress RFI, EMI and ESDNSI/ISA-12.27.01 approved single sealNOSHOK 625 and 626 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsIntrinsically Safe, entity approval for Class I, II and III, Division 1, Groups A, B, C, D, E, F and G and Class I, Zone 0 Aex ia IICDust Ignition-proof for Class II and III, Division 2, Groups F and GNon-incendive for Class I, Division 2, Groups A, B, C and D.CE compliant with pressure equipment directive 2014/68/EU. ANSI/ISA-12.27.01, Approved single seal.Ideal for applications including chemical processing, gas pressure measurement, oil field & offshore, mining, vapory recovery systems, well head measurementLimitations Which Apply AreThese units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation.In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
Qty:
Part #:1267-625-2-1-1-8-14
- Additional InformationFactory Mutual and Canadian Standards Association approvedCE compliant to suppress RFI, EMI and ESDNSI/ISA-12.27.01 approved single sealNOSHOK 625 and 626 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as followsIntrinsically Safe, entity approval for Class I, II and III, Division 1, Groups A, B, C, D, E, F and G and Class I, Zone 0 Aex ia IICDust Ignition-proof for Class II and III, Division 2, Groups F and GNon-incendive for Class I, Division 2, Groups A, B, C and D.CE compliant with pressure equipment directive 2014/68/EU. ANSI/ISA-12.27.01, Approved single seal.Ideal for applications including chemical processing, gas pressure measurement, oil field & offshore, mining, vapory recovery systems, well head measurementLimitations Which Apply AreThese units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation.In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
Qty:
Displaying: 1 - 24 of 51 Matching Items