7-1/4in
1/8in
Part #:204566
Price is good for the quantity we have in stock. Prices could vary for ordered quantities for more than we have in stock.
- I.P.S. Pressure PVC Pipe conforms to ASTMD2241 for standard dimension ratios and is available in SDR 21 (200 psi) PVC compounds used in the extrusion of this pipe meet or exceed the requirements of ASTM D1784 cell class 12454. Gaskets conform to ASTM F477. Joint design is tested to the requirements of ASTM D3139.
2.375 OD
2.135 ID
.0113 Wall
$
2.20
Qty:
Qty:
Part #:521321
- Technical Specifications
Pipe O.D. (inch) 1-1/2
Length (ft) 20
Color Blue
Length (m) 6
Pipe O.D. (mm) 40
Pipe Outside Diameter 1-1/2 inch, 40 mm
Length 20 ft, 6 m
Color Blue
Maximum Operating Pressure 232 psi, 15.9 bar
Minimum Operating Temperature -4 °F, -20 °C
Maximum Operating Temperature +115 °F, +46.1 °C
Weight 6.22 lb, 2.82 kg
Vacuum Pressure Rating 29.6 Inch-Hg
Materials of Construction Powder Coated Aluminum
Application Compressed Air, Vacuum, Industrial/Inert Gases
Specifications Met EN 755.2, EN 755.8, EN 573.3, ISO 9001, ASME B31.1 - 31.9, ISO 8573 (Air Quality), TUV Certification, CE Conformity, QUALICOAT
$
27.39
Qty:
Part #:700623
- DWV PVC (Drain, Waste, and Vent Polyvinyl Chloride) pipe. DWV pipe is similar to Schedule 40 PVC pipe in many ways but unlike Schedule 40 pipe, DWV pipe is not intended to contain any pressure. The drain, waste, and vent applications of DWV PVC pipe is limited to situations where the entire flow is generated by gravity, with no required pressure containment.
$
1.25
Qty:
Part #:700624
- DWV PVC (Drain, Waste, and Vent Polyvinyl Chloride) pipe. DWV pipe is similar to Schedule 40 PVC pipe in many ways but unlike Schedule 40 pipe, DWV pipe is not intended to contain any pressure. The drain, waste, and vent applications of DWV PVC pipe is limited to situations where the entire flow is generated by gravity, with no required pressure containment.
$
1.40
Qty:
Part #:700626
- DWV PVC (Drain, Waste, and Vent Polyvinyl Chloride) pipe. DWV pipe is similar to Schedule 40 PVC pipe in many ways but unlike Schedule 40 pipe, DWV pipe is not intended to contain any pressure. The drain, waste, and vent applications of DWV PVC pipe is limited to situations where the entire flow is generated by gravity, with no required pressure containment.
$
6.60
Qty:
Part #:708697
- Unique Sealing The superior performance of Jamesbury ball valves is achieved by the unique design of the seats. The flexible lip seats exert continuous sealing pressure on the ball and automatically compensate for wear and changes in pressure and temperature, yielding positive bi-directional zero-leak shut-off. The stem seal sealing system ensures minimum emissions. Materials Standard products are available with carbon steel body and stainless steel trim or all stainless steel construction. Special body and trim materials such as Alloy 20, Hastelloy® C, and others are available upon request. For applications involving chemicals, acids, caustics, and steam we recommend our Xtreme® seat material, which provides superior lifecycle and sealing performance compared to virgin or filled PTFE. We can accommodate nearly any special customer or application specific requirement. Fite-Tite® Valves All Jamesbury Fire-Tite flanged ball valves are qualified to API 607 and ISO 10497. This ensures minimal leakage in the event of a fire.:
Qty:
Part #:802246
- Description
The CHANNELLOCK® 8WCB 8" WIDEAZZ® Adjustable Wrench features a super wide jaw opening, providing the capacity of a 12-inch wrench in a lightweight, compact 8-inch adjustable wrench supporting larger nuts and bolt sizes. The combination of a smart and comfortable tapered handle design with CODE BLUE® grips, precise 4-thread knurl and minimal head width greatly improves performance in confined spaces. CHANNELLOCK® Adjustable Wrenches are made in Spain and forged from rugged chrome vanadium steel.
WIDEAZZ® jaws are up to 60% wider than a standard wrench of the same size
LONGER jaws grip better and are up to 22% THINNER than a standard wrench of the same size, providing greater access in tight spaces
MEASUREMENT SCALES are laser engraved (in. on front, mm. on reverse) and handy for sizing nuts, pipe and tube diameters
PRECISE 4-thread knurl improved adjustment accuracy
OPTIMAL head width and non-protruding jaws allow accessibility for hard to reach applications
CODE BLUE® comfort grips
RUGGED Chrome Vanadium steel construction
CHROME finish for ultimate rust prevention
Made to CHANNELLOCK® specifications in Spain.
Qty:
Part #:505945
- OLD Lang Plier Snap Ring 1434 :
Qty:
Part #:509073
- Proto Satin Combination Wrench 1/2" 12 Point
Features and Benifits
Satin finish provides corrosion resistance and a slip resistant grip.
12 point box end allows for fine indexing, helping to improve speed and access. Fits 4, 6 and 12 point fasteners.
Anti-Slip Design (ASD) open end.
Fractional sizes 11/32" and smaller and sizes 1-5/16" and larger do not have the ASD feature.
Box ends incorporate the TorquePlus&trade system.
Qty:
Part #:729-48-01-6093
-
SAWZALL® Multi-Material Blades
Milwaukee® designs and manufactures Sawzall® blades for the toughest professional applications. Material, blade geometry and heat treating are designed to maximize general purpose cutting performance.
Qty:
Part #:501847
- 8" 8/12 TPI SAWZALL® Blades (5 Pk)
Our Multi-Material SAWZALL® Blades can cut through a variety of materials in the toughest professional applications. This MILWAUKEE® reciprocating saw blade features double relief angles that reduce tooth stress for longer life and have our precision forming process to create sharper teeth for fast cutting in wood, nail embedded wood, composition material, plastic, cast iron, ferrous and non-ferrous metals. Each blade is equipped with matrix II bi-metal teeth for greater durability and a ½&rdquo universal tang that fits all SAWZALLS® for maximum versatility.
Qty:
Part #:509041
- Proto Satin Adjustable Wrench 8-7/64"
Feature and Benefits
Satin finish provides corrosion resistance and a slip resistant grip.
Extra wide jaw capacity.
Square jaw opening provides strength and tight fit.
Rugged I-beam style handle and reinforced stress areas radius corner design.
Qty:
Part #:500550
- 3/4" Drive Extensions
&bull Chrome plating provides increased protection from rust and corrosion
&bull Ball and spring socket retention
Qty:
Qty:
Qty:
Part #:521322
- Technical Specifications
Color Blue
Length (ft) 20
Pipe O.D. (mm) 25
Length (m) 6
Pipe O.D. (inch) 1
Pipe Outside Diameter 1 inch, 25 mm
Length 20 ft, 6 m
Color Blue
Maximum Operating Pressure 232 psi, 15.9 bar
Minimum Operating Temperature -4 °F, -20 °C
Maximum Operating Temperature +115 °F, +46.1 °C
Weight 4.24 lb, 1.92 kg
Vacuum Pressure Rating 29.6 Inch-Hg
Materials of Construction Powder Coated Aluminum
Application Compressed Air, Vacuum, Industrial/Inert Gases
Specifications Met EN 755.2, EN 755.8, EN 573.3, ISO 9001, ASME B31.1 - 31.9, ISO 8573 (Air Quality), TUV Certification, CE Conformity, QUALICOAT
$
18.26
Qty:
Part #:700625
- DWV PVC (Drain, Waste, and Vent Polyvinyl Chloride) pipe. DWV pipe is similar to Schedule 40 PVC pipe in many ways but unlike Schedule 40 pipe, DWV pipe is not intended to contain any pressure. The drain, waste, and vent applications of DWV PVC pipe is limited to situations where the entire flow is generated by gravity, with no required pressure containment.
$
3.80
Qty:
Qty:
Displaying: 1 - 24 of 125 Matching Items