7/8in
1-gang
Part #:304966
- Extremely durable for hard-use institutional applications. Spring-loaded covers close automatically when plugs are removed. Die-cast copper-free aluminum construction. Stainless steel springs. Screws and spring covers are chrome-plated brass. Baked-on lacquer finish. Heavy rubber gaskets provide positive seal. All covers below are for 4 screw mounting only. Comply with 2005 NEC Section 406.8(A) and 406.8(B)(2).
$
12.35
Qty:
Part #:503802
-
PIP® Superior Grade Split Cowhide Leather Welder's Glove with Cotton/Foam Lining and DuPont&trade Kevlar® Stitching
Side Split Cowhide leather construction provides comfort, durability, excellent abrasion resistance, and breathability
Side Split leather is durable and provides excellent protection due to its dense fibers
Fully welted to protect seams from abrasions
Stitched with Kevlar® adding strength and burn resistance
Cotton/foam lining gives welders additional heat protection but still absorbs moisture
One-piece back for extended glove life
Wing thumb increases comfort in open-handed work
Double reinforced palm and thumb strap increases durability and provides added protection at common wear points
Part #:504775
- The KAMORI&trade RWG52 Cut Protection Work Glove by Radians has an ANSI Cut rating of A4 and an EN388 cut rating of 5. The white grain goat skin glove with an Aramid lining provides excellent cut protection.
White grain goat skin driver with Aramid lining
Slip-on cuff design and keystone thumb provide a comfortable fit.
Load weight of 1851g
Tested to EN 388 standards for Abrasion Resistance, Blade Cut, Tear, and Puncture (3 5 2 3).
ANSI Cut Level A4, EN388 Cut Level 5.
Qty:
Part #:504778
- The KAMORI&trade RWG52 Cut Protection Work Glove by Radians has an ANSI Cut rating of A4 and an EN388 cut rating of 5. The white grain goat skin glove with an Aramid lining provides excellent cut protection.
White grain goat skin driver with Aramid lining
Slip-on cuff design and keystone thumb provide a comfortable fit.
Load weight of 1851g
Tested to EN 388 standards for Abrasion Resistance, Blade Cut, Tear, and Puncture (3 5 2 3).
ANSI Cut Level A4, EN388 Cut Level 5.
Qty:
Qty:
Part #:512251
-
Radians SJ11QB Class 3 weather proof Bomber Jacket with a quilted liner makes it very easy to slip on and off over other fleece or other warm outwear.
Quilted Liner 160g/m2
Color blocked bottom
2" silver reflective tape
PU coated weather proof 300D oxford polyester shell
Concealed attached hood
Elastic waistband and cuffs
Zippered, lined slash pockets
3D flap covered cell phone / radio chest pocket
Two lower zipper closure lined pockets
One inside open chest pocket
Mic tabs on both shoulders.
Qty:
Part #:512262
Qty:
Part #:512740
- Powder-Free Latex Gloves, Large, Natural, 4 4/5 mil, 1000/Carton
Eliminates potential aerosolization of glove powder and powder associated transfer of chemical allergens
Perfect combination of protection and sensitivity.
Enhanced strength and durability.
Quick and easy to don.
Improved tactile sensitivity with increased gripping characteristics
Qty:
Qty:
Part #:800672
- The Neese Economy Series is basic rain wear to keep on hand for emergency weather conditions, and is made of durable water resistant PVC over polyester. The Economy Rain Coat is 48" in length and has a stand up collar and detachable hood.
PVC (.35mm) on Polyester
Stand-up collar with snaps and detachable hood
Raglan shoulder design with underarm vents
Vented upper back
Snap front closure
Lower front left and right side slash pockets
Coat is minimum of 48&rdquo long
Qty:
Qty:
Part #:554964
- MCR Safety Mustang Leather Welding Work Gloves Premium Top Grain Cowskin Leather 4.5 Inch Split Leather Gauntlet Cuff
Only the finest top grain leather go into our MIG/TIG welding options. Sewn with DuPont&trade Kevlar® thread to resist sparks and sharp metals which can unravel most gloves, you will find these gloves a great long-term value. Low heat welding often requires optimal dexterity which affords great attention to detail. You'll find features on the 4950 include Premium grade cream grain cow leather, 4.5 Inch russet split gauntlet cuff and wing thumb. If you are looking for the best leather welding gloves, look no further than MCR Safety!
Qty:
Qty:
Part #:516622
- North Polar Insulated Leather Palm - 70/6465NK
High performance protection in cold weather. Thinsulate® liner provides excellent thermal protection, from temperatures down to -36° F (-38° C). Waterproof vinyl liner helps to prevent hands from getting wet. Gunn cut and wing thumb construction for wearer comfort.
Specifications
Construction
Gunn cut, wing thumb
Gauge / mil
NA
Glove Type
Thermal glove
Material
Split leather and cotton canvas
Material Color
Blue and yellow
Recommended for temperatures down to -36°F (-38°C)
Part #:334-2023R
- Pinch-On Double Ear Clamp Attributes
Weight
0.0138 lb
Mandatory Package/Box Quantity
100
Material
304 Stainless Steel
Nominal Size
7/8"
Range
.748" to .906"
$
1.35
Qty:
Part #:303205
- WP BOX 1G 3 HOLE 1/2 WPB23
Wide range of sizes, depths, and gangs.
Baked-on electrostatic, polyester, powder paint for superior scratch and corrosion resistance.
2 closure plugs and mounting lugs furnished with all boxes.
UL Listed for wet and/or damp locations with appropriate cover.
Designed for both interior and exterior applications.
Will accept standard 4 screw mounting covers and single gang weatherproof covers.
Simply strike desired knockout studs with a sharp hammer blow for clean mounting holes.
Heavy die-cast aluminum.
For covering patents, see www.legrand.us/patents.
CSA File Number 17695
Qty:
Part #:303701
- One Gang Heavy Cast Aluminum Cover Duplex Receptacle Horizontal, Gray
Extremely durable for hard-use institutional applications.
Spring-loaded covers close automatically when plugs are removed.
Die-cast copper-free aluminum construction.
Stainless steel springs.
Screws and spring covers are chrome-plated brass.
Baked-on lacquer finish.
Heavy rubber gaskets provide positive seal.
All covers below are for 4 screw mounting only.
Comply with 2005 NEC Section 406.8(A) and 406.8(B)(2).
CSA File Number 16807
Qty:
Part #:511900
-
7/8" Anchor Shackle, Screw Pin, Forged Carbon Steel, Painted Blue
Shackle Bodies Are Drop-Forged Carbon Steel
Self Colored (Painted Blue)
C-419-S Shackles Meet the Design Requirements of Federal Specification RR-C-271, Type IVA, Grade A, Class 2
Working Load Limit, Size, Manufacture Name, Date Code and USA Permanently Marked on Each Shackle
Statistically Tested for Impact Resistance, Tensile Strength, Hardness, Ductility and Fatigue
419 Series Shackles Meet or Exceed All Manufacturing Requirements of the ASME B30.26 &rdquoRigging Hardware&rdquo. These Include the Material Ductility Requirement (Section 26-1.1.2), the Design Factor Requirement (Section 26.1.2), the Identification Requirement (Section 26-1.5.1), and the Effective Temperature Range (Section 26-1.6.1). the Shackles Can Be Proof Tested in Accordance with Section 26-1.4
Certification Available Upon Request
6 to 1 Design Factor
Pins and Bolts Are Heat-Treated and Made of Alloy Steel
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Qty:
Part #:503822
- Hex End L-Wrenches - ProGuard&trade Finish
Chamfered tool tips eliminate burrs and help tools seat in screw head
Sharp corners transfer more torque to the screw and reduce stripping
Precision machined for ease of use and superior fit
Qty:
Qty:
Displaying: 1 - 24 of 182 Matching Items