15.5"
4-3/4"
Part #:508621
- Kwik Bolt 1 carbon steel wedge anchor
High-performance wedge anchor for cracked concrete and seismic (carbon steel)
Material, corrosionCarbon steel, zinc-plated
Head configurationExternally threaded
Drilling Method (AS)Hammer Drilling, Hollow Drill Bit Drilling
Material, corrosionCarbon steel, zinc-platedHead configurationExternally threadedDrilling Method (AS)Hammer Drilling, Hollow Drill Bit DrillingInstallation toolsTE 6-A36 Cordless rotary hammer, SIW 6AT-A22 Cordless impact wrench
$
4.72
Qty:
Part #:503703
- 5/8" Shank Diameter Eyebolts Shoulder Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially. A steel washer or spacer may be required for proper seating
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
Part #:502091
$
3.92
Qty:
Part #:503850
$
6.65
Qty:
Part #:512240
-
Radians SJ01B-3 Type R, Class 3, Long Sleeve Hooded Sweatshirt with zipper closure offers superior warmth while keeping you visible. Color blocking at the bottom conceals dirt.
Black elastic knit waistband and cuffs.
Low Piling Polyester fleece material.
Color blocking at the bottom.
2&rdquo silver reflective tape.
Full front zipper closure.
Two lower pouch pockets.
Hood with adjustable pull cords.
Custom imprinting available on left chest and back center.
25 Wash Max.
Meets ANSI/ISEA 107-2015 Standards.
Qty:
Part #:810266
- 4 3/4" Pin Punches
For driving out and removing already loosened pins and keys after initial movement by a solid or starter punch
Qty:
Qty:
Qty:
Qty:
Part #:701373
- Unique Sealing The superior performance of Jamesbury ball valves is achieved by the unique design of the seats. The flexible lip seats exert continuous sealing pressure on the ball and automatically compensate for wear and changes in pressure and temperature, yielding positive bi-directional zero-leak shut-off. The stem seal sealing system ensures minimum emissions. Materials Standard products are available with carbon steel body and stainless steel trim or all stainless steel construction. Special body and trim materials such as Alloy 20, Hastelloy® C, and others are available upon request. For applications involving chemicals, acids, caustics, and steam we recommend our Xtreme® seat material, which provides superior lifecycle and sealing performance compared to virgin or filled PTFE. We can accommodate nearly any special customer or application specific requirement. Fite-Tite® Valves All Jamesbury Fire-Tite flanged ball valves are qualified to API 607 and ISO 10497. This ensures minimal leakage in the event of a fire.:
Qty:
Part #:705123
- Unique Sealing The superior performance of Jamesbury ball valves is achieved by the unique design of the seats. The flexible lip seats exert continuous sealing pressure on the ball and automatically compensate for wear and changes in pressure and temperature, yielding positive bi-directional zero-leak shut-off. The stem seal sealing system ensures minimum emissions. Materials Standard products are available with carbon steel body and stainless steel trim or all stainless steel construction. Special body and trim materials such as Alloy 20, Hastelloy® C, and others are available upon request. For applications involving chemicals, acids, caustics, and steam we recommend our Xtreme® seat material, which provides superior lifecycle and sealing performance compared to virgin or filled PTFE. We can accommodate nearly any special customer or application specific requirement. Fite-Tite® Valves All Jamesbury Fire-Tite flanged ball valves are qualified to API 607 and ISO 10497. This ensures minimal leakage in the event of a fire.:
Qty:
closeout
Part #:500191
- CLOSEOUTS Only 10 Left!
-
Kwik Bolt 3 Wedge anchor Exp anchor KB3 3/4" x 4-3/4" LT MC #3001006 (Discontinued)
High-performance wedge anchor with everyday approvals for uncracked concrete (carbon steel)
Material, corrosionCarbon steel, zinc-plated
Head configurationExternally threaded
Approvals / Test reportsFM (Factory Mutual), ICC-ES report (concrete), ICC-ES report (masonry), LABC, Nuclear (NQA-1), UL (Underwriter Laboratories)
Material, corrosionCarbon steel, zinc-platedHead configurationExternally threadedApprovals / Test reportsFM (Factory Mutual), ICC-ES report (concrete), ICC-ES report (masonry), LABC, Nuclear (NQA-1), UL (Underwriter Laboratories)Base materialsConcrete (lightweight), Concrete (uncracked), Masonry (grout-filled CMU)Type of fixingPre-fastening, Through-fasteningDrilling Method (AS)Hammer Drilling, Hollow Drill Bit Drilling
Replacement 2231466 KB1 10/Box Carbon Steel Wedge Anchor
$
6.64
Qty:
Qty:
Part #:1030-5/8IN X 4-3/4IN B-7 STUD SC-1
$
3.06
Qty:
Qty:
Qty:
Qty:
Part #:910-7441SD1-PWR
- Country of Origin CN:
Qty:
Displaying: 1 - 18 of 18 Matching Items