100psi
2-1/2in
Marsh 0 - 100psi 2-1/2in Dry Gauge with 1/4in Center Back Mount Steel Case and Brass Internals J5448
Qty:
Part #:800751
- The Trerice D80 Series Industrial Gauge is designed for rugged performance requirements at an economical cost. This liquid filled gauge is furnished with a stainless steel case and crimped ring. Wetted parts are either bronze tube with Lead-Free (PBF) brass socket or stainless steel.
Qty:
Qty:
Part #:800642
- The Trerice D80 Series Industrial Gauge is designed for rugged performance requirements at an economical cost. This gauge is furnished with a stainless steel case and crimped ring. Wetted parts are either bronze tube with Lead-Free (PBF) brass socket or stainless steel.
Qty:
Part #:801447
- The Trerice D80 Series Industrial Gauge is designed for rugged performance requirements at an economical cost. This liquid filled gauge is furnished with a stainless steel case and crimped ring. Wetted parts are either bronze tube with Lead-Free (PBF) brass socket or stainless steel.
Qty:
Part #:501-D30854
- DS Series In-Line Condensate SeparatorsCarbon Steel Drain SeparatorCondensate in steam and air piping reduces thermal efficiency, causes water hammer, corrodes equipment such as valves and pipes, and causes other problems.
In-line (drain) separators DS-1, DS-2, DS-3, and DS-4 separate condensate efficiently by using the centrifugal force of steam or air created by introducing it into a specifically shaped path. Because of the simple structure of the drain separators, pressure loss is minimized, enabling clean, dry steam or air to be fed to equipment.
When steam or air flow enters the drain separator, centrifugal force is generated in the fluid because of the devices internal structural design. The fluid drains along the wall because of the difference in specific gravity with steam or air, eventually striking the baffle. The baffle guides the fluid to the drain outlet and to the trap, which drains it. As a result, small dirt particles and condensate are separated and removed from the system through the bottom drain.
• Cyclone structure maximizes liquid separation efficiency
• Pressure loss is extremely low
• No moving parts means no breakdowns
Qty:
Part #:334-250-B-SS
- Dixon Cam & Groove Type B Coupler x Male NPT
Attributes
Maximum Operating Pressure
150 PSI
Weight
2.08 lb
Optional Package/Box Quantity
10
Size
2-1/2"
Material
316 Stainless Steel
Seal
Buna-N
$
184.01
Qty:
Part #:334-AD250
- AD250 - Boss-Lock Cam & Groove Type D Coupler x Female NPT
Attributes
Maximum Operating Pressure
150 PSI
Weight
1.5065 lb
Break Quantity
0
Optional Package/Box Quantity
0
Size
2-1/2"
Material
356T6 Aluminum
Seal
Nitrile Rubber
$
60.08
Qty:
Part #:334-AD250EZ
- EZ Boss-Lock Cam & Groove Type D Coupler x Female NPT
Attributes
Maximum Operating Pressure
150 PSI
Weight
1.5065 lb
Optional Package/Box Quantity
1
Size
2-1/2" (65 mm)
Material
356T6 Aluminum
Seal
Nitrile Rubber
$
66.34
Qty:
Part #:334-GLSC415
- Liquid Filled Center Back Mount Stainless Case Gauge
Attributes
Pressure Range
0-100 PSI
Weight
0.55 lb
Break Quantity
0
Optional Package/Box Quantity
1
Minor Gradient
2
Figure Interval
20
Size
2-1/2" face
Material
Stainless Steel
Mount
1/4 inch center back mount
Temperature Range
-40°F to 150°F (-40°C to 65.6°C)
$
24.81
Qty:
Part #:334-RD250EZ
- EZ Boss-Lock Cam & Groove Type D Coupler x Female NPT
Attributes
Maximum Operating Pressure
150 PSI
Weight
3.6 lb
Optional Package/Box Quantity
10
Size
2-1/2" (65 mm)
Material
316 Stainless Steel
Seal
Nitrile Rubber
$
172.53
Qty:
Displaying: 1 - 11 of 11 Matching Items