5/8in
2ft x 3ft
View:
Active Filters :
Qty:
Part #:503802
-
PIP® Superior Grade Split Cowhide Leather Welder's Glove with Cotton/Foam Lining and DuPont&trade Kevlar® Stitching
Side Split Cowhide leather construction provides comfort, durability, excellent abrasion resistance, and breathability
Side Split leather is durable and provides excellent protection due to its dense fibers
Fully welted to protect seams from abrasions
Stitched with Kevlar® adding strength and burn resistance
Cotton/foam lining gives welders additional heat protection but still absorbs moisture
One-piece back for extended glove life
Wing thumb increases comfort in open-handed work
Double reinforced palm and thumb strap increases durability and provides added protection at common wear points
Qty:
Qty:
Part #:504775
- Product Description
Ideal for glass and material handling, fishing industries, sanitation, general maintenance, woodworking, waste handling and recycling, and many other general applications.
Features
Top Grain Goatskin leather construction is the softest, most abrasion-resistant leather and is highly recommended for applications requiring tactile sensitivity
Top Grain leather is smooth, provides durability and dexterity
Unique HPPE blended lining provides exceptional ANSI A5 cut resistance, while maintaining comfort and dexterity
Stitched with Aramid thread adding strength and burn resistance
Keystone thumb is ergonomic, reduces hand fatigue, offers superior dexterity and durability
Drivers gloves feature slip-on styling to provide good fit and comfort
Elastic closure sewn inside glove for safety and comfort
Color coded hems for easy size identification
Meets the content requirements for Chromium VI free leather
Qty:
Qty:
Qty:
Qty:
$
73.00
RL
Qty:
Part #:511296
-
HIT-Z Anchor rod Anchor rod HIT-Z 5/8" x 9-1/2" #2018448Material, corrosionCarbon steel, zinc-platedWrench/nut size15/16 inDrill bit diameter3/4 inBase materialsConcrete (cracked), Concrete (uncracked)PROFIS SoftwareYesApprovals / Test reportsICC-ES report (concrete)Cleaning proceduresNon CleaningType of fixingPre-fastening, Through-fasteningProduct ClassUltimate
Part #:511896
-
5/8" Anchor Shackle, Screw Pin, Forged Carbon Steel, Painted Blue
Shackle Bodies Are Drop-Forged Carbon Steel
Self Colored (Painted Blue)
C-419-S Shackles Meet the Design Requirements of Federal Specification RR-C-271, Type IVA, Grade A, Class 2
Working Load Limit, Size, Manufacture Name, Date Code and USA Permanently Marked on Each Shackle
Statistically Tested for Impact Resistance, Tensile Strength, Hardness, Ductility and Fatigue
419 Series Shackles Meet or Exceed All Manufacturing Requirements of the ASME B30.26 &rdquoRigging Hardware&rdquo. These Include the Material Ductility Requirement (Section 26-1.1.2), the Design Factor Requirement (Section 26.1.2), the Identification Requirement (Section 26-1.5.1), and the Effective Temperature Range (Section 26-1.6.1). the Shackles Can Be Proof Tested in Accordance with Section 26-1.4
Certification Available Upon Request
6 to 1 Design Factor
Pins and Bolts Are Heat-Treated and Made of Alloy Steel
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:512251
-
Radians SJ11QB Class 3 weather proof Bomber Jacket with a quilted liner makes it very easy to slip on and off over other fleece or other warm outwear.
Quilted Liner 160g/m2
Color blocked bottom
2" silver reflective tape
PU coated weather proof 300D oxford polyester shell
Concealed attached hood
Elastic waistband and cuffs
Zippered, lined slash pockets
3D flap covered cell phone / radio chest pocket
Two lower zipper closure lined pockets
One inside open chest pocket
Mic tabs on both shoulders.
Qty:
Part #:512262
Qty:
Qty:
Part #:514122
- Right Choice &trade White Multifold Towel
Distribution # 78000011
Right Choice &trade Multifold Towels provide great performance and value. Right Choice &trade Multifold Towels provide great performance and value and provides the best value in the folded towel category. The small case cube is idel for tight spaces and one-at-a-time dispensing minimizes cross-contamination and germs. Chlorine free.
Part #:800552
- A 100% pure PTFE joint sealant used in virtually any gasketing applications. Adhesive backing allows for easy installation and material is soft and flexible so it handles curves and contours.
Installation takes only minutes and removal of the sealant is simple and involves no scraping or grinding. It is sold in continuous lengths so that it can be cut off in various lengths.
Part #:506827
- Rubber Vinyl Garden Hose Attributes
Weight
7.75 lb
Size
5/8" x 50"
Material
Rubber & Vinyl
Color
Green
Working Pressure
400 PSI
Temperature Range
0°F to 140°F (-17.8°C to 60°C)
$
60.59
Qty:
Part #:521697
- Pinch-On Double Ear Clamp Attributes
Weight
0.0118 lb
Mandatory Package/Box Quantity
100
Material
Zinc Plated Steel
Nominal Size
5/8"
Range
.591" to .709" (16.0 mm to 19.0 mm)
$
0.71
Qty:
Qty:
Part #:508597
- SDS PLUS 4CT MX4&trade 5/8" X 10" X 12"
Our MX4&trade 4-Cutter SDS PLUS Rotary Hammer Drill Bits with solid head carbide deliver up to 5x longer life in concrete with rebar. Engineered with rebar guards to provide maximum durability in hard aggregate and rebar. We designed our MX4&trade 4-Cutter bits with sharp centering tips for exact spot drilling in concrete and metal decking. 4-cutter design prevents lock-up in rebar, reducing downtime. Variable flutes remove dust faster, reducing heat and delivering up to 20% more holes per battery charge. The wear mark indicator on each drill bit shows you when they no longer meet the ANSI requirement. These MILWAUKEE® MX4&trade 4-Cutter Drill Bits are ideal for concrete with rebar and masonry applications. Choose from single bits, bulk packs, or drill bit kits in a variety of sizes.
Qty:
Part #:134-05038S-PWR
- Country of Origin CN:
Qty:
Qty:
Qty:
Displaying: 1 - 24 of 198 Matching Items