4-1/2in
2in x 1-1/2in
View:
Active Filters :
- Size: 2in x 1-1/2in 4-1/2in 8in x 600ft
Part #:501914
- FEATURES & BENEFITS
Scott Essential (formerly Kleenex) provides reliable balance of efficiency, performance and value. Drying is one of the most important steps in the hand washing process, and how you dry matters. Forced air dryers and hot air dryers can take two or even three times as long to use as a paper towel, and studies show that, while the overall cost per use is comparable, the likelihood of spreading germs is greatly reduced with the use of absorbent, single-use drying towels, such as white Scott Essential (formerly Kleenex) Hard Roll Paper Towels. Germ counts are significantly lower following the use of a touch-free paper towel dispenser (like the compatible Kimberly-Clark Professional Hard Roll Paper Towel Dispenser)&mdashas much as a 200% decrease when compared with using either jet or hot air dryers. And, rather than blowing germs into the air during use, the paper towels are thrown neatly away. These paper towel rolls offer terrific hand drying performance, so your guests will waste less. A healthy workplace is a happy workplace, and providing high-quality Scott Essential (formerly Kleenex) Hard Roll commercial paper towels to your guests, clients and employees is one important piece of the puzzle. It's the same Kleenex quality, now Scott branded.
Scott Essential (formerly Kleenex) paper towel rolls give soft feel with the premium performance of commercial paper towels
Absorbency Pockets absorb lots of water fast for superior hand drying performance, so guests use fewer paper towels
Paper towel rolls 1.75" core size and 7.9" roll diameter
Compatible with a variety of Kimberly-Clark paper towel dispensers
Qty:
closeout
$203.00 MSRP
$
144.21
Part #:507361
- Availability: Will be backordered (Typically arrives in 10 days)
- 7.5 Amp 4-1/2" Small Angle Grinder (Discontinued, Being Replaced by 6141-30)
The 6140-30 4-1/2" 7.5 Amp Small Angle Grinder delivers performance, durability and ease-of-use features for industrial users. The X-large paddle switch with lock-on provides increased comfort and ease-of use when operating the grinder in various positions. Milwaukee's built in advanced airflow system, including Debris Baffles and Multi-Port Exhaust, extends tool life. 25% longer lasting epoxy motor protection extends tool life by protecting the copper wires from abrasion. The tool-free burst resistant guard allows the user to quickly adjust the guard without the use of a tool.
Qty:
Part #:288220
- M18 FUEL&trade 4-1/2" / 5" Braking Grinder (Tool Only)
The world's first cordless braking grinder stops accessories in under 2 seconds, delivers the power of a corded grinder, and has up to 10X longer tool life. The M18 FUEL&trade 4-1/2" / 5" Grinder supplies maximum sustained power to complete the toughest grinding, surface preparation and cutting applications. The POWERSTATE&trade Brushless Motor provides up to 10X longer motor life and lower cost of ownership. The M18&trade REDLITHIUM&trade XC5.0 Battery Pack delivers up to 4X more run time and 20% more power. The grinder features REDLINK PLUS&trade Intelligence, the most advanced system of cordless power tool electronics, for maximum performance. A Rapid Stop Brake feature stops accessories in under 2 seconds. The 18-volt lithium-ion grinder&rsquos thin body design gives it optimized balance to rest easily in your hands. Tool-free accessory changes using the FIXTEC nut and guard adjustments mean less downtime during work. The grinder is built with the same tool body, gearing system and anti-vibration side handle as Milwaukee&rsquos legendary high-performance corded grinders for maximum durability on the job. The kit includes 2 M18&trade REDLITHIUM&trade XC5.0 Extended Capacity Battery Packs, a multi-voltage charger and carrying case. Grinding wheel sold separately.
Qty:
Part #:729-2882-22
- M18 FUEL&trade 4-1/2" / 5" Braking Grinder w/ ONE-KEY&trade Paddle Switch, No Lock
Our M18 FUEL&trade 4-1/2" / 5" Braking Grinder with ONE-KEY&trade Paddle Switch, No Lock Kit is the next advancement in power and performance of cordless grinders while enhancing safety with its RAPIDSTOP&trade Brake. The M18 FUEL&trade 4-1/2" / 5" Braking Grinder with ONE-KEY&trade generates 11A corded power to complete the toughest grinding and cutting applications. The POWERSTATE&trade Brushless Motor delivers maximum sustained power and 8,500 RPM to remove material faster and increase productivity. REDLINK PLUS&trade Intelligence ensures unmatched levels of performance, protection, and compatibility. The RAPIDSTOP&trade Brake provides stop times under 2 seconds with an abrasive disc. Our M18 FUEL&trade 4-1/2" / 5" Braking Grinder with ONE-KEY&trade includes an electronic clutch for kickback protection, as well as overload protection to maximize motor life. Compatible with ONE-KEY&trade, this grinder wirelessly connects to a smartphone to track and manage the tool, providing you with visibility to where tools are across your network of jobs. The included M18&trade REDLITHIUM&trade HIGH OUTPUT&trade XC6.0 Batteries deliver 50% more power while running 50% cooler than the M18&trade REDLITHIUM&trade XC Batteries. Experience faster accessory changes, and less downtime with tool-free accessory and guard adjustments, while remaining fully compatible with the most common accessories in the market. The MILWAUKEE® M18 FUEL&trade 4-1/2" / 5" Braking Grinder with ONE-KEY&trade is the next level of jobsite productivity and enhanced safety in cordless grinders.
Qty:
$
35.42
Qty:
Part #:307256
- Appleton™ Type RW steel reducing washers are used to reduce the size of a knockout or slip hole in a sheet metal enclosure to a smaller trade size..
$
1.95
Qty:
Qty:
Qty:
Qty:
Qty:
$
24.98
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
$
118.51
Qty:
Qty:
Part #:307096
- Appleton RB Series reducers are explosionproof and dust-ignitionproof. They are designed to reduce conduit entries to a smaller size and are used in threaded rigid and IMC conduit systems.
$
18.78
Qty:
Qty:
Qty:
Qty:
Displaying: 1 - 24 of 56 Matching Items