9/16in
3/8in-24
Part #:503802
-
PIP® Superior Grade Split Cowhide Leather Welder's Glove with Cotton/Foam Lining and DuPont&trade Kevlar® Stitching
Side Split Cowhide leather construction provides comfort, durability, excellent abrasion resistance, and breathability
Side Split leather is durable and provides excellent protection due to its dense fibers
Fully welted to protect seams from abrasions
Stitched with Kevlar® adding strength and burn resistance
Cotton/foam lining gives welders additional heat protection but still absorbs moisture
One-piece back for extended glove life
Wing thumb increases comfort in open-handed work
Double reinforced palm and thumb strap increases durability and provides added protection at common wear points
Part #:504775
- The KAMORI&trade RWG52 Cut Protection Work Glove by Radians has an ANSI Cut rating of A4 and an EN388 cut rating of 5. The white grain goat skin glove with an Aramid lining provides excellent cut protection.
White grain goat skin driver with Aramid lining
Slip-on cuff design and keystone thumb provide a comfortable fit.
Load weight of 1851g
Tested to EN 388 standards for Abrasion Resistance, Blade Cut, Tear, and Puncture (3 5 2 3).
ANSI Cut Level A4, EN388 Cut Level 5.
Qty:
Part #:512251
-
Radians SJ11QB Class 3 weather proof Bomber Jacket with a quilted liner makes it very easy to slip on and off over other fleece or other warm outwear.
Quilted Liner 160g/m2
Color blocked bottom
2" silver reflective tape
PU coated weather proof 300D oxford polyester shell
Concealed attached hood
Elastic waistband and cuffs
Zippered, lined slash pockets
3D flap covered cell phone / radio chest pocket
Two lower zipper closure lined pockets
One inside open chest pocket
Mic tabs on both shoulders.
Qty:
Part #:512262
Qty:
Part #:512740
- Powder-Free Latex Gloves, Large, Natural, 4 4/5 mil, 1000/Carton
Eliminates potential aerosolization of glove powder and powder associated transfer of chemical allergens
Perfect combination of protection and sensitivity.
Enhanced strength and durability.
Quick and easy to don.
Improved tactile sensitivity with increased gripping characteristics
Part #:516622
- North Polar Insulated Leather Palm - 70/6465NK
High performance protection in cold weather. Thinsulate® liner provides excellent thermal protection, from temperatures down to -36° F (-38° C). Waterproof vinyl liner helps to prevent hands from getting wet. Gunn cut and wing thumb construction for wearer comfort.
Specifications
Construction
Gunn cut, wing thumb
Gauge / mil
NA
Glove Type
Thermal glove
Material
Split leather and cotton canvas
Material Color
Blue and yellow
Recommended for temperatures down to -36°F (-38°C)
Part #:509044
- Proto 1/2" Drive Extra Long Hex Bit Socket 9/16"
Features and Benefits
Bit holders have a hex opening to hold the bit allowing the bit holder to take the full load of torque.
Made of heat-treated alloy steel.
Polished chrome finish.
Qty:
Qty:
Qty:
Qty:
Qty:
Part #:506851
-
Cool, comfortable, and washable. Offers protection for light welding and from light sparks.
9 oz flame retardant 100% cotton Weldlite&trade fabric meets ASTM D6413-10
30" length
Relaxed fit design offers comfort for all-day wearability
Adjustable snap wrist, and large inside pocket
Leather reinforced, black anodized non-reflective snaps
Weldlite&trade high quality fabric is anti-static, rot and mildew resistant
Maintains its flame resistance for up to 50 home or 25 commercial washings
Sizes XS-6XL
Qty:
Part #:512240
-
Radians SJ01B-3 Type R, Class 3, Long Sleeve Hooded Sweatshirt with zipper closure offers superior warmth while keeping you visible. Color blocking at the bottom conceals dirt.
Black elastic knit waistband and cuffs.
Low Piling Polyester fleece material.
Color blocking at the bottom.
2&rdquo silver reflective tape.
Full front zipper closure.
Two lower pouch pockets.
Hood with adjustable pull cords.
Custom imprinting available on left chest and back center.
25 Wash Max.
Meets ANSI/ISEA 107-2015 Standards.
Qty:
Part #:512473
-
The Radians RWG22 Hi-Viz work glove provides excellent protection from abrasion. The seamless design of the 13 gauge, polyester shell with the polyurethane dipped palm provides protection in wet or dry conditions and a comfortable fit in hazardous applications.
Applications Construction, Assembly, Automotive, General Purpose, Manufacturing, Shipping, Warehousing
Qty:
closeout
$17.67 MSRP
$
11.88
Part #:512500
- CLOSEOUTS Only 1 Left!
- The RWG603 Cut Protection Sandy Foam Nitrile Coated Glove by Radians has an ANSI Cut rating of A5 and an EN388 cut rating of 5. The high visibility red sandy foam nitrile palm coating provides a strong grip in both wet and dry applications. The dense TPR overlays on the back of the hand provide added impact protection. This 13 gauge high performance glove is ideal for applications that need both cut and abrasion resistance along with the ability to grip objects.
Applications Petrochem Industry, Automotive, Construction, Manufacturing, Material Handling
Qty:
Part #:517554
- The Radians RWG605 cold weather glove provides EN388 level 5 protection and ANSI level 4 protection against cuts. The RWG605 features a 13 gauge knitted HPPE outer shell with a smooth blue latex coating and a 7 gauge Acrylic inner shell to provide extra protection and comfort. The palm has a black foam latex coating that provides excellent protection from abrasion in wet or dry, cold weather conditions.
Applications Cold Storage, Manufacturing, Frozen Food Processing, General Outdoor Activities
Qty:
Qty:
Part #:811597
- 3/8" Drive 6-Point SAE 9/16" Deep Socket
SUPERTORQUE lobular openings for greater turning power without deforming the fastener
Designed for maximum engagement on 6-point fasteners
Qty:
$
4.75
Qty:
Part #:500375
- 9/16" 12-Point SAE SUPERCOMBO® Combination Wrench
&bull SUPERCOMBO® open end has specially designed grooves that direct wrench force away from fastener corners
&bull SUPERTORQUE® box opening design allows application of higher torque without rounding or deforming hex fastener points. No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points
&bull Meets or exceeds AErospace specification AS 954 for 12 point fasteners (as defined by AS 870) to provide accurate torque/tension relationship for precision application
&bull May be used on all common hex (6 point) fasteners with considerable advantage over conventional box end wrenches to increase both hand tool flexibility and economy
&bull Box and open end openings are identical
Qty:
Part #:503456
- 9/16" Shank Diameter Eyebolts Shoulder Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially. A steel washer or spacer may be required for proper seating
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
$
30.87
Qty:
$
30.65
Qty:
Displaying: 1 - 24 of 100 Matching Items