10in
6-1/4in
Qty:
Qty:
Part #:505416
- Description
CHANNELLOCK® Straight Jaw Tongue & Groove Pliers are built to last with a PERMALOCK® fastener to eliminate nut and bolt failure, patented reinforcing edge to minimize stress breakage and laser-hardened teeth to provide a better, longer lasting grip. CHANNELLOCK® Straight Jaw Tongue & Groove Pliers are made in USA and forged from high carbon U.S. steel that is specially coated for ultimate rust prevention.
The ORIGINAL STRAIGHT JAW Tongue & Groove Pliers provide a strong, versatile grip for use in both directions
RELIABLE PERMALOCK® fastener eliminates nut and bolt failure with increased joint strength
STRONG 90-degree, laser-hardened teeth for superior grip and longevity
FORGED high carbon U.S. steel for maximum strength and durability is specially coated for ultimate rust prevention.
UNDERCUT tongue & groove won&rsquot slip
CHANNELLOCK BLUE® grips for comfort
100% MADE IN USA
Qty:
Part #:505946
- Old Lang 65-(75) Snap Ring Plier:
Qty:
Qty:
Qty:
Part #:202527
- 226 Full Circle Clamp DI Lug Single Band - For repairing complete breaks, splits, holes in pipe or joining pipe
Description These clamps provide fast, economical means for repairing full circumferential breaks,holes, cracks and other types of damage.Application Works on Cast Iron, Ductile Iron, Steel, Asbestos Cement, Copper, Aluminum, PVC, HDPE,Fiberglass and other pipe types.Key Features
&bullStainless Steel bands&bullWorking pressure up to 300 PSI
&bullNominal temperature range -20°F to 180°F
&bullRemovable lugs to allow installation in tight spaces
&bullMay be used to join plain end pipe of the same diameter
&bullStandard widths through 30"
&bull360° gasket seal&bullFlexi-Coat® Epoxy Finish for corrosion resistance
&bullRange up to .40" in single band
&bullDrop-in bolts for easier installation
Qty:
Qty:
Qty:
Part #:503224
- Spline Bit 2-Cutter 3/8" x 10"
Milwaukee®'s Spline 2-Cutter Rotary Hammer drill bits are used for drilling intro brick, block, and concrete
Qty:
Part #:523326
- Spline Bit 2-Cutter 1/2" x 10"
Milwaukee®'s Spline 2-Cutter Rotary Hammer drill bits are used for drilling intro brick, block, and concrete
Qty:
Part #:508601
- SDS-PLUS 4CT MX4&trade 7/8" X 8" X 10"
Qty:
Qty:
Part #:519071
- Country of Origin CN:
Qty:
Part #:205216
- 226 Full Circle Clamp DI Lug Single Band - For repairing complete breaks, splits, holes in pipe or joining pipe
Description These clamps provide fast, economical means for repairing full circumferential breaks,holes, cracks and other types of damage.Application Works on Cast Iron, Ductile Iron, Steel, Asbestos Cement, Copper, Aluminum, PVC, HDPE,Fiberglass and other pipe types.Key Features
&bullStainless Steel bands&bullWorking pressure up to 300 PSI
&bullNominal temperature range -20°F to 180°F
&bullRemovable lugs to allow installation in tight spaces
&bullMay be used to join plain end pipe of the same diameter
&bullStandard widths through 30"
&bull360° gasket seal&bullFlexi-Coat® Epoxy Finish for corrosion resistance
&bullRange up to .40" in single band
&bullDrop-in bolts for easier installation
Qty:
Part #:206903
- 226 Full Circle Clamp DI Lug Single Band - For repairing complete breaks, splits, holes in pipe or joining pipe
Description These clamps provide fast, economical means for repairing full circumferential breaks,holes, cracks and other types of damage.Application Works on Cast Iron, Ductile Iron, Steel, Asbestos Cement, Copper, Aluminum, PVC, HDPE,Fiberglass and other pipe types.Key Features
&bullStainless Steel bands&bullWorking pressure up to 300 PSI
&bullNominal temperature range -20°F to 180°F
&bullRemovable lugs to allow installation in tight spaces
&bullMay be used to join plain end pipe of the same diameter
&bullStandard widths through 30"
&bull360° gasket seal&bullFlexi-Coat® Epoxy Finish for corrosion resistance
&bullRange up to .40" in single band
&bullDrop-in bolts for easier installation
Qty:
Part #:204821
- 226 Full Circle Clamp DI Lug Single Band - For repairing complete breaks, splits, holes in pipe or joining pipe
Description These clamps provide fast, economical means for repairing full circumferential breaks,holes, cracks and other types of damage.Application Works on Cast Iron, Ductile Iron, Steel, Asbestos Cement, Copper, Aluminum, PVC, HDPE,Fiberglass and other pipe types.Key Features
&bullStainless Steel bands&bullWorking pressure up to 300 PSI
&bullNominal temperature range -20°F to 180°F
&bullRemovable lugs to allow installation in tight spaces
&bullMay be used to join plain end pipe of the same diameter
&bullStandard widths through 30"
&bull360° gasket seal&bullFlexi-Coat® Epoxy Finish for corrosion resistance
&bullRange up to .40" in single band
&bullDrop-in bolts for easier installation
Qty:
Part #:810310
- 10" Long Taper Punches
Designed for aligning the holes in metal pieces through which rivets, bolts, or screws will be inserted
Not intended for driving pins as punch may become stuck in work
Also called line-up aligning or drift punches
Qty:
Qty:
Part #:500312
- 2" SAE Adjustable Face Spanner Wrench
&bull Ideal for adjusting collars, lock nut rings, and bearings
&bull Specifically engineered to hold up under the most rigorous industrial use
Qty:
Qty:
Part #:502304
- 1-1/4"-8 x 10" B7 Stud and Nuts &ndash Xylan 1424 Blue Teflon Fluoropolymer Coating
Premium High-Performance Fastening Solution for Extreme Applications
The 1-1/4"-8 x 10" B7 Stud and Nuts are engineered for superior strength, durability, and corrosion resistance, making them an ideal choice for demanding industrial environments. Manufactured from ASTM A193 Grade B7 alloy steel, these fasteners offer excellent tensile strength, hardness, and high-temperature performance. They are further enhanced with a Xylan 1424 Blue Teflon Fluoropolymer Coating, which provides exceptional resistance to chemicals, moisture, and extreme conditions.
Key Features & Benefits
High-Strength B7 Alloy Steel
Made from ASTM A193 Grade B7 alloy steel, ensuring superior tensile and yield strength for high-pressure and high-temperature applications.
Xylan 1424 Blue Teflon Fluoropolymer Coating
Advanced fluoropolymer coating delivers exceptional corrosion resistance, reducing maintenance costs and increasing longevity.
Provides low friction and high lubricity, enhancing ease of installation and removal.
Ensures excellent resistance to chemicals, saltwater, and harsh environmental conditions, making it ideal for offshore, marine, and chemical processing applications.
Precision Machined & Threaded
5/8"-11 Unified National Coarse (UNC) thread pitch for a secure and reliable fit.
Manufactured to precise tolerances, ensuring compatibility with various industrial applications.
High-Temperature & Pressure Resistance
Withstands extreme heat and pressure, making it suitable for petrochemical plants, refineries, power plants, and high-pressure piping systems.
Common Applications
Oil & Gas Industry &ndash Used in refineries, pipelines, and drilling equipment due to its high corrosion and pressure resistance.
Chemical Processing Plants &ndash Ideal for fastening in environments exposed to aggressive chemicals.
Marine & Offshore &ndash Perfect for saltwater and humid conditions, thanks to the anti-corrosion properties of the Xylan coating.
$
20.38
Qty:
Displaying: 1 - 24 of 106 Matching Items