8-1/2in
7-1/2in
Part #:503695
- 1-1/4" Shank Diameter Eyebolts Plain Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Plain pattern eyebolts must never be used to lift an angular load
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
Part #:513172
- Country of Origin CN:
Qty:
Qty:
Part #:203020
- 226 Full Circle Clamp DI Lug Single Band - For repairing complete breaks, splits, holes in pipe or joining pipe
Description These clamps provide fast, economical means for repairing full circumferential breaks,holes, cracks and other types of damage.Application Works on Cast Iron, Ductile Iron, Steel, Asbestos Cement, Copper, Aluminum, PVC, HDPE,Fiberglass and other pipe types.Key Features
&bullStainless Steel bands&bullWorking pressure up to 300 PSI
&bullNominal temperature range -20°F to 180°F
&bullRemovable lugs to allow installation in tight spaces
&bullMay be used to join plain end pipe of the same diameter
&bullStandard widths through 30"
&bull360° gasket seal&bullFlexi-Coat® Epoxy Finish for corrosion resistance
&bullRange up to .40" in single band
&bullDrop-in bolts for easier installation
Qty:
Part #:203737
- 226 Full Circle Clamp DI Lug Single Band - For repairing complete breaks, splits, holes in pipe or joining pipe
Description These clamps provide fast, economical means for repairing full circumferential breaks,holes, cracks and other types of damage.Application Works on Cast Iron, Ductile Iron, Steel, Asbestos Cement, Copper, Aluminum, PVC, HDPE,Fiberglass and other pipe types.Key Features
&bullStainless Steel bands&bullWorking pressure up to 300 PSI
&bullNominal temperature range -20°F to 180°F
&bullRemovable lugs to allow installation in tight spaces
&bullMay be used to join plain end pipe of the same diameter
&bullStandard widths through 30"
&bull360° gasket seal&bullFlexi-Coat® Epoxy Finish for corrosion resistance
&bullRange up to .40" in single band
&bullDrop-in bolts for easier installation
Qty:
Part #:203027
- 226 Full Circle Clamp DI Lug Single Band - For repairing complete breaks, splits, holes in pipe or joining pipe
Description These clamps provide fast, economical means for repairing full circumferential breaks,holes, cracks and other types of damage.Application Works on Cast Iron, Ductile Iron, Steel, Asbestos Cement, Copper, Aluminum, PVC, HDPE,Fiberglass and other pipe types.Key Features
&bullStainless Steel bands&bullWorking pressure up to 300 PSI
&bullNominal temperature range -20°F to 180°F
&bullRemovable lugs to allow installation in tight spaces
&bullMay be used to join plain end pipe of the same diameter
&bullStandard widths through 30"
&bull360° gasket seal&bullFlexi-Coat® Epoxy Finish for corrosion resistance
&bullRange up to .40" in single band
&bullDrop-in bolts for easier installation
Qty:
Part #:810247
- 7 1/2" Cold Chisels
The most commonly used chisels in the chisel line
For cutting, shaping and removing metal softer than the cutting edge of the chisel
Qty:
Part #:811447
- 3/8" Drive Round Head Ratchet 7-5/8"
&bull Double pawl design with 72 teeth action provides a 5° ratcheting angle
&bull Shift lever reverses action instantly
&bull Knurled handle provides a non-slip grip
&bull Chrome finish models provides increased protection from rust and corrosion
Qty:
Part #:300656
- Catalog Number FNA-(amp) Dimensions 13⁄32” x 1 1⁄2” (10.3 x 38.1mm) Volts - 250Vac (1⁄10-6A) - 125Vac (6 1/4-15A) - 32Vac (20-30A) Amps 1⁄10-30A IR See data sheet # 2029 for interrupting rating by circuit voltage and fuse amp rating Agency Information - CE - UL Listed 1/10 to 8/10A @ 125/250Vac, 1-15A @ 125Vac, Guide JDYX, File E19180 - CSA Certified 1/10 to 10A @ 125Vac, Class 1422-01, File 53787 Typical Applications - Power electronic circuits with high inrush currents and fuse openings must be quickly apparent - Inductive load circuits where pin indication of open fuse condition is desired Construction - Silver-plated pin for positive, electrical signal activation - 12 amp and more versions are dual-tube construction:
Qty:
Part #:301112
- 13&frasl32 x 1-1/2 250Vac Fast-acting supplemental fuses Catalog symbol &ndash color code BAF - Green (250Vac max 1/4 to 30A) For superior protection, Bussmann recommends upgrading to Low-Peak&trade Class CC fuses.
Qty:
Part #:301116
- 13&frasl32 x 1-1/2 250Vac Fast-acting supplemental fuses Catalog symbol &ndash color code BAF - Green (250Vac max 1/4 to 30A) For superior protection, Bussmann recommends upgrading to Low-Peak&trade Class CC fuses.
Qty:
Part #:301125
- 13&frasl32 x 1-1/2 250Vac Fast-acting supplemental fuses Catalog symbol &ndash color code BAF - Green (250Vac max 1/4 to 30A) For superior protection, Bussmann recommends upgrading to Low-Peak&trade Class CC fuses.
Qty:
Part #:301312
- 13&frasl32 x 1-1&frasl2 500Vac Time-delay supplemental fuses Catalog symbol / color code FNQ - Orange (500Vac maximum voltage)
Qty:
Part #:301386
- 13&frasl32 x 1-1&frasl2 500Vac Time-delay supplemental fuses Catalog symbol / color code FNQ - Orange (500Vac maximum voltage)
Qty:
Part #:301510
- 13&frasl32 x 1-1&frasl2 250Vac Time-delay supplemental fuses Catalog symbol / color code FNM - Green (250Vac maximum voltage)
Qty:
$
67.91
Qty:
Part #:302556
$
55.08
Qty:
Part #:303120
$
37.87
Qty:
Part #:303764
- 13&frasl32 x 1-1/2 250Vac Fast-acting supplemental fuses Catalog symbol &ndash color code BAF - Green (250Vac max 1/4 to 30A) For superior protection, Bussmann recommends upgrading to Low-Peak&trade Class CC fuses.
Qty:
Part #:305466
- Catalog Number KTK-R-_ Dimensions 13/32" x 1-1/2" (10.3 x 38.1mm) Volts 600Vac (or less) Amps 1⁄10-30A IR - 200kA Vac RMS Sym Agency Information - CE - UL Listed, Std. 248-4, Class CC, UL Listed, Guide JDDZ, File E4273 - CSA Certified, File 53787, Class 1422-02, C22.2 NO. 248.4 - RoHS Compliant Typical Applications - Branch Circuits - Specialized Circuits - Industrial Control - Street Lighting (isolated, in-line fuse holders):
Qty:
Part #:306071
$
55.08
Qty:
Part #:306387
- 13&frasl32 x 1-1&frasl2 250Vac Time-delay supplemental fuses Catalog symbol / color code FNM - Green (250Vac maximum voltage)
Qty:
Part #:502303
$
18.60
Qty:
Displaying: 25 - 48 of 93 Matching Items