7-1/2in
1-1/8in
Part #:805781
- 9" Carbide Grit SAWZALL® Blade (3 Pk)
Milwaukee® carbide grit blades are designed for cutting ceramic tile, plaster, masonry, brick, fiberglass and other abrasive materials.
Qty:
Qty:
Part #:512475
- 9" 18 TPI SAWZALL® Blades (50 Pk)
Thin Kerf metal-cutting blades with the Double Duty Upgrade&trade feature a tooth form that is optimized for the longest life and increased speed. Tough Neck&trade is engineered to protect against tang breakage and delivers the strongest SAWZALL® blade tang on the market. Maintaining a short profile and thin body, these blades are ideal for making fast, flexible cuts.
Part #:506853
- 9" 18 TPI SAWZALL® Blades (5 Pk)
Thin Kerf metal-cutting blades with the Double Duty Upgrade&trade feature a tooth form that is optimized for the longest life and increased speed. Tough Neck&trade is engineered to protect against tang breakage and delivers the strongest SAWZALL® blade tang on the market. Maintaining a short profile and thin body, these blades are ideal for making fast, flexible cuts.
Qty:
Part #:200391
- 226 Full Circle Clamp DI Lug Single Band - For repairing complete breaks, splits, holes in pipe or joining pipe
Description These clamps provide fast, economical means for repairing full circumferential breaks,holes, cracks and other types of damage.Application Works on Cast Iron, Ductile Iron, Steel, Asbestos Cement, Copper, Aluminum, PVC, HDPE,Fiberglass and other pipe types.Key Features
&bullStainless Steel bands&bullWorking pressure up to 300 PSI
&bullNominal temperature range -20°F to 180°F
&bullRemovable lugs to allow installation in tight spaces
&bullMay be used to join plain end pipe of the same diameter
&bullStandard widths through 30"
&bull360° gasket seal&bullFlexi-Coat® Epoxy Finish for corrosion resistance
&bullRange up to .40" in single band
&bullDrop-in bolts for easier installation
Qty:
Part #:519073
- Specifications
CATALOG NUMBER
7463SD1
ANCHOR SIZE
1" X 9"
THREAD LENGTH
5-3/8"
PACK QUANTITY
10
CATALOG NUMBER
7463SD1
ANCHOR SIZE
1" X 9"
THREAD LENGTH
5-3/8"
PACK QUANTITY
10
Qty:
Part #:206892
- 226 Full Circle Clamp DI Lug Single Band - For repairing complete breaks, splits, holes in pipe or joining pipe
Description These clamps provide fast, economical means for repairing full circumferential breaks,holes, cracks and other types of damage.Application Works on Cast Iron, Ductile Iron, Steel, Asbestos Cement, Copper, Aluminum, PVC, HDPE,Fiberglass and other pipe types.Key Features
&bullStainless Steel bands&bullWorking pressure up to 300 PSI
&bullNominal temperature range -20°F to 180°F
&bullRemovable lugs to allow installation in tight spaces
&bullMay be used to join plain end pipe of the same diameter
&bullStandard widths through 30"
&bull360° gasket seal&bullFlexi-Coat® Epoxy Finish for corrosion resistance
&bullRange up to .40" in single band
&bullDrop-in bolts for easier installation
Qty:
Part #:507216
- (10)Tb 9In Prof Torpedo Lvl
High contrast e-BAND&trade vials highlight the edge of the bubble
High contrast vial surrounds improve vial visibility
3 vials - plumb, level and 45°
V-Groove working edge for accurate alignment on pipe or conduit
Aluminum frame with top read window
Strong magnetic edge
Made in the USA
Limited lifetime warranty
Qty:
Part #:729-48-00-8706
-
The WRECKER&trade Multi-Material SAWZALL® Blade 9" 7/11TPI 25pk
The Next Generation Wrecker is designed for Multi-Material demolition cutting. This mean it has the capability of cutting nail embedded wood, plastics and a variety of metals. This blade has 25% more high speed steel for increase life and durability. With all of these features, the Next Generation Wrecker is a true demoliton blade for the professional user.
Qty:
Part #:729-48-00-8713
- 9" 10 TPI The Torch&trade SAWZALL® Blades (25 Pk)
The Torch&trade metal-cutting blades with the Double Duty Upgrade&trade feature a tooth form optimized for the longest life and maximum durability. Tough Neck&trade is engineered to protect against tang breakage and delivers the strongest SAWZALL® blade tang on the market. Grid Iron&trade features a stamped honeycomb pattern throughout the body of the blade that greatly increases the rigidity of the blade, making it the stiffest metal cutting SAWZALL® blade on the market. These blades are ideal for making tough, straight cuts.
Qty:
Part #:502094
$
5.10
Qty:
Part #:508410
- Item # VL20T2, Grinding Carbide Bur
Flexovit carbide burs feature precision ground flutes. These flutes are manufactured on five axis CNC fluting machines resulting in precise control of tool geometry. This eliminates chatter and premature wear. With their chisel tooth cutting pattern, double cut carbide burs produce small distinct granular chips instead of long sharp slivers. This eliminates the loading of the bur&rsquos flutes and minimizes chatter. Double Cut Carbide Burs are the most popular, smooth cutting style burs and ideal for use on steel, stainless steel, alloys and exotics.
Qty:
Qty:
Part #:729-48-00-8788
- SAWZALL® TORCH Metal Demolition Blades
The Torch&trade metal-cutting blades with the Double Duty Upgrade&trade feature a tooth form optimized for the longest life and maximum durability. Tough Neck&trade is engineered to protect against tang breakage and delivers the strongest SAWZALL® blade tang on the market. Grid Iron&trade features a stamped honeycomb pattern throughout the body of the blade that greatly increases the rigidity of the blade, making it the stiffest metal cutting SAWZALL® blade on the market. These blades are ideal for making tough, straight cuts.
Qty:
Part #:729-48-00-5187
-
9" 14 TPI SAWZALL® Blades (5 Pk)
Thin Kerf metal-cutting blades with the Double Duty Upgrade&trade feature a tooth form that is optimized for the longest life and increased speed. Tough Neck&trade is engineered to protect against tang breakage and delivers the strongest SAWZALL® blade tang on the market. Maintaining a short profile and thin body, these blades are ideal for making fast, flexible cuts.
Qty:
Part #:503695
- 1-1/4" Shank Diameter Eyebolts Plain Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Plain pattern eyebolts must never be used to lift an angular load
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
Part #:459-15389
- Hex End T-Handles - ProGuard&trade Finish
Solid steel handles
Welded handle/blade connection
Ergonomic handle design
Flywheel effect saves time
Smooth, non-porous handle coating
Handle coating extends along blade
Qty:
Part #:459-15390
- Hex End T-Handles - ProGuard&trade Finish
Solid steel handles
Welded handle/blade connection
Ergonomic handle design
Flywheel effect saves time
Smooth, non-porous handle coating
Handle coating extends along blade
Qty:
Part #:203020
- 226 Full Circle Clamp DI Lug Single Band - For repairing complete breaks, splits, holes in pipe or joining pipe
Description These clamps provide fast, economical means for repairing full circumferential breaks,holes, cracks and other types of damage.Application Works on Cast Iron, Ductile Iron, Steel, Asbestos Cement, Copper, Aluminum, PVC, HDPE,Fiberglass and other pipe types.Key Features
&bullStainless Steel bands&bullWorking pressure up to 300 PSI
&bullNominal temperature range -20°F to 180°F
&bullRemovable lugs to allow installation in tight spaces
&bullMay be used to join plain end pipe of the same diameter
&bullStandard widths through 30"
&bull360° gasket seal&bullFlexi-Coat® Epoxy Finish for corrosion resistance
&bullRange up to .40" in single band
&bullDrop-in bolts for easier installation
Qty:
Part #:203737
- 226 Full Circle Clamp DI Lug Single Band - For repairing complete breaks, splits, holes in pipe or joining pipe
Description These clamps provide fast, economical means for repairing full circumferential breaks,holes, cracks and other types of damage.Application Works on Cast Iron, Ductile Iron, Steel, Asbestos Cement, Copper, Aluminum, PVC, HDPE,Fiberglass and other pipe types.Key Features
&bullStainless Steel bands&bullWorking pressure up to 300 PSI
&bullNominal temperature range -20°F to 180°F
&bullRemovable lugs to allow installation in tight spaces
&bullMay be used to join plain end pipe of the same diameter
&bullStandard widths through 30"
&bull360° gasket seal&bullFlexi-Coat® Epoxy Finish for corrosion resistance
&bullRange up to .40" in single band
&bullDrop-in bolts for easier installation
Qty:
Part #:203027
- 226 Full Circle Clamp DI Lug Single Band - For repairing complete breaks, splits, holes in pipe or joining pipe
Description These clamps provide fast, economical means for repairing full circumferential breaks,holes, cracks and other types of damage.Application Works on Cast Iron, Ductile Iron, Steel, Asbestos Cement, Copper, Aluminum, PVC, HDPE,Fiberglass and other pipe types.Key Features
&bullStainless Steel bands&bullWorking pressure up to 300 PSI
&bullNominal temperature range -20°F to 180°F
&bullRemovable lugs to allow installation in tight spaces
&bullMay be used to join plain end pipe of the same diameter
&bullStandard widths through 30"
&bull360° gasket seal&bullFlexi-Coat® Epoxy Finish for corrosion resistance
&bullRange up to .40" in single band
&bullDrop-in bolts for easier installation
Qty:
Part #:200060
-
Specifications
Sockets
1 1/4&rdquo & 1 1/16&rdquo1 1/8&rdquo & 1 1/16&rdquo1 1/8" & 15/16&rdquo
Application
Mechanical joints and restraints, repair clamps, service saddlesGas and water industry couplings, repair clamps, service saddles, flange boltsFlange bolts, friction clamps, hydrant break flange and some bonnet bolts
Handle Length
in
17
mm
432
Weight
lbs
2.5
kg
1.1
-
For maximum performance, clean and lubricate regularly.
Product Detail
Catalog No.
L4N1
Item Code
02690
Qty:
Part #:810247
- 7 1/2" Cold Chisels
The most commonly used chisels in the chisel line
For cutting, shaping and removing metal softer than the cutting edge of the chisel
Qty:
Part #:811447
- 3/8" Drive Round Head Ratchet 7-5/8"
&bull Double pawl design with 72 teeth action provides a 5° ratcheting angle
&bull Shift lever reverses action instantly
&bull Knurled handle provides a non-slip grip
&bull Chrome finish models provides increased protection from rust and corrosion
Qty:
Displaying: 1 - 24 of 108 Matching Items